Operating the OMICRON CPC 100

OMICRONenergy
9 followers
Oct 22, 2023
The CPC can either be operated manually, or by using its built-in testing know-how, either directly from the front panel, or by remote-control from a laptop. For each task, QUICK mode, the test cards and Primary Test Manager provide easy, efficient and comprehensive ways to operate the CPC 100, corresponding to the individual preference.
Get more Information about CPC 100: https://www.omicronenergy.com/en/products/cpc-100/
Interested in Testing Primary Assets? – Watch all of our videos: https://youtube.com/playlist?list=PL5F0FD9968998E6E7
The CPC can either be operated manually or by using its built-in testing know-how,
either directly from the front panel or by remote control from a laptop.
Many tests of primary apparatus only require the injection of an appropriate test signal.
For this type of work, Quick Mode is ideal.
Allowing the control of all the outputs of the CPC,
Quick Mode provides simple and fast measurement options for CTs and VTs,
power transformers, switching apparatus, and more.
Users simply select the output, enter the value of the test signal,
and start the injection by pressing the green button.
Output values can be changed at any time using the keyboard or scroll wheel, even during injection.
Also, measurements can be performed easily.
Two quantities can be determined at the same time,
such as the primary and secondary currents of a CT, which are measured in amplitude and phase.
From these two values, the CPC can calculate a third one, such as the ratio and polarity of a CT.
By measuring voltage and current, the CPC can calculate impedance values,
for instance, when measuring a burden.
From measurement results, reports including ISO 9000 relevant data,
such as date and time, or file name, can be generated in several languages with one click.
With minimal preparation and training,
Quick Mode allows common measurements to be performed with maximum efficiency.
In addition to working manually with Quick Mode,
typical tests are also supported by designated test cards with predefined measurement procedures.
For current transformers, or CTs, these test cards assist users in performing ratio and phase measurements,
recording the excitation curve and knee point, and measuring the burden.
Test cards for voltage transformers, or VTs, help to measure the ratio, phase angle, and burden.
The contact resistance of circuit breakers can also be measured.
For power transformers, test cards aid the user in measuring the ratio, winding resistance, and tap changer,
as well as the power factor and capacitance.
Test cards can be combined to form an entire test plan, for instance, when testing a transformer.
Test plans such as these can also be prepared off-site, on a PC or laptop, without the CPC.
On-site, the test plan guides users through the process step by step.
By clearing the results of an earlier test, an identical test can be performed again.
Thus, the results of periodical measurements are perfectly comparable.
These results are also the basis for comprehensive reports.
Based on the test cards, predefined test plans and matching MSXL report templates are provided for various power system apparatus,
such as CTs, VTs, and power transformers.
Reports can be generated automatically, and afterwards, they can be turned into customized documents
where further content, such as company logos, can be added easily.
Aside from being able to operate a CPC directly from the front panel,
PTM, the primary test manager software, can control the CPC from a PC or laptop.
PTM supports users throughout the entire workflow of apparatus identification,
test preparation, testing, analysis, and administration.
General data like location, production date, manufacturer, serial numbers,
and ratings such as the number of windings and vector group can all be entered.
PTM uses these entries to automatically generate a test plan, which can be modified easily.
The test plan provides measurement guidelines, clear connection diagrams,
and is designed to minimize test wiring errors and save testing time.
It allows test conditions to be documented thoroughly.
Its settings only allow the correct output signals and values to be generated,
thus preventing damage to the apparatus while it's being tested.
PTM also shows output values and the test's progress in real time.
Test reports containing all measurement data can be customized easily.
Thresholds and tolerance bands can be used to automatically assess test results.
With PTM's search function, information from several apparatus or measurements
can be accessed easily for further analysis, such as comparing results or trending.
Such comparisons may also include measurements from other vendors' databases,
which can be imported into PTM.
For each task, Quick Mode, the test cards, and Primary Test Manager
provide easy, efficient, and comprehensive ways to operate the CPC-100
corresponding to the individual's preference.
