Protection relay testing with QuickCMC

OMICRONenergy
9 followers
Oct 22, 2023
To operate a CMC via a PC, a comprehensive suite of software tools is provided. Compatibility is a very important design principle. The software version provided with the latest CMC, can also be used to control all existing CMC models. In manual operation mode, the setting of voltage and current values, phase angles, and frequencies can be done either numerically or directly in the vector diagram.
Get more information: http://www.omicron.at/
To operate a CMC via a PC, a comprehensive suite of software tools is provided.
Compatibility is a very important design principle.
The PC software provided with the latest CMC can also be used to control all existing CMC models.
In manual operation mode, the setting of voltage and current values,
phase angles, and frequencies can be done either numerically or directly in the vector diagram.
The status of the binary inputs is displayed, which allows time measurements to be performed.
Using the step and ramp function, thresholds such as starting values can be determined.
For many tests, calculations are required to determine values such as zero or negative sequence functions.
The CMC helps engineers to save a lot of time since it performs many of these calculations for them.
The CMC also allows values of active or reactive power to be directly entered,
enabling the operator to quickly check power transducers and energy meters.
For manual testing, the values of DC current and voltage outputs from measurement transducers are displayed.
Output quantities can also be defined as impedances, either as absolute values or as a value relative to a distance relay zone setting.
The CMC then calculates, displays, and outputs the phase values,
taking into account parameters including the CT star point, the nominal current, and so on.
