Description: Introduction to basic physics. This course will introduce the conceptual and mathematical framework for kinematics and Newtonian dynamics, and also to teach problem solving techniques that are used in Physics. Other topics include: vectors; motion, force, and energy.
So, let's return just quickly to a few issues from the last example problem we did, just
to highlight where we're going.
I'm not going to re-solve the problem by any means, but I do want to look at the collision.
We had a bullet with some velocity v-naught that we wanted to find, there was the block
of wood with velocity zero, this is our initial, and at the end, they're combined.
This is our final, and it has some net velocity v-final.
When I did the problem, I apologize, I did not actually draw this picture, and I had
a few questions afterwards, so I wanted to make sure we got the picture drawn.
Because it's a collision, we conserved momentum, so when we looked at the initial momentum,
we had the mass of the bullet times v-naught, that's the momentum of the bullet, plus zero,
that was the momentum of the block of the wood, because it was not moving.
And our final momentum, it was a single object, so it had a combined mass of the two times
velocity final.
So we went from two objects to one object.
So if we have a collision where things stick, that's what we're going to have, we're going
to have two objects going to one object, and you want to keep track of that.
If we have an explosion, or launching a rocket, we'll do a couple of those today, then we
go the other way, we start with one object, and we end up with two.
The other type of collision is where two things hit, and they bounce off each other.
And so they don't stick, so we start with two, and we end up with two.
So our three basic collisions, or explosions, are two objects going to one object.
When that happens, you will have an inelastic collision.
We will lose kinetic energy, and we will talk about that.
We will have one object going to two objects.
This is what we refer to as an explosion, and the final one is our two objects going
to two objects, and this will either be elastic or inelastic.
And though we defined elastic collision as conserving mechanical energy, almost all the
time the elastic versus inelastic is a question of whether or not the change in kinetic energy
is zero, or whether it's not zero.
Now, there are a couple of things you want to pay attention to.
So if two objects stick, then it's always inelastic.
And what you would typically do is you use momentum conservation to find your velocities,
and then if you wanted to compute the energy lost, and again, keep in mind that this is
a strange phrase, which is why I'm putting it in quotes.
The energy lost is not really lost, it goes into other types of energy.
It's almost always kinetic energy lost, and I don't know why we don't just say that, but
I'm using the common phrase that everybody else uses.
Notice it's also energy lost, so it's not change in energy.
If your kinetic energy decreases, that will be a positive energy lost, so it's kind of
a weird thing.
So it's often the initial minus the final, because it's how much you lost, not what the
change was.
But you would take these velocities and just plug into whatever you had initially, and
subtract whatever you have at the end, and often at the end it might be some object that's
combined.
This is just an example, it's not a formula.
You might have an initial single object, so this is one object, moving, sticking, and
both together.
You might have had two objects at the beginning, then you would have one half m1vi squared
plus one half m2vi squared, and you would subtract from it whatever you have at the
end.
Any questions on that?
Now if you have, say, a more common one, two objects, mass A, mass B, they collide,
maybe they bounce off each other, so this is my before, and this is my after.
Now there's kind of two possibilities.
The problem may tell you it is elastic or inelastic, and then you know kinetic energy
is conserved or it's not conserved.
That's the easy one.
It might not say anything, but it might ask you is it elastic, or how much energy is lost.
A danger there, too often students just see two objects bouncing off, assume it's elastic,
solve the problem using that, and since you've assumed it, you force it to be elastic, you
get an energy loss of zero, when in fact it wasn't elastic and energy was lost, and you'll
get the problem wrong.
So if they're asking you is it elastic or how much energy is lost, you cannot assume
it's elastic.
That means there must be enough information to only use that momentum's conserved.
And then you find these and do what we did before and then compute your change in kinetic
energy, and using that you would then give your answer.
Either it's zero, in which case it's elastic, or it's not zero, in which case energy is
lost.
So those are the scenarios in collisions, and we're going to be going through some of
those today.
Questions on that?
Yes?
Say again?
So this type of question might be on Friday's exam.
It's in the homework.
Everything I do today might be on Friday's exam, because this also is included in the
homework that's due Wednesday.
Everything on Wednesday is kind of review, so pieces of that, anything that reviews chapter
7, 8, and 9 might be on Friday.
Everything else is for the final.
So this leads us to an easy warm-up clicker question.
So this is referring to the block problem.
So this is the bullet hitting the block, the two of them sticking together, and then moving.
The question is, how would you find the kinetic energy lost in this collision?
There is no energy lost because it's always conserved.
Subtract the final initial kinetic energy, find the force from the impulse, and compute
the work.
This problem cannot be done.
Excellent.
70% of you got it right.
This is exactly what you do.
When you have a collision, particularly where they stick and you know it's an elastic, finding
the kinetic energy lost is a matter of you've solved for both velocities, which you can
do using momentum conservation, you then plug it in for kinetic energy before and kinetic
energy after, and look at how much is lost.
So it's fairly straightforward.
So now let's take a little segue.
We did a bunch of collisions.
The other thing that can happen is I have an explosion, and a standard sort of explosion
is a rocket ship launching, and then you launch the rocket ship, and it goes up, and the fuel
goes down.
And the before situation is you have the mass of the rocket plus the mass of the fuel, and
typically you have a velocity equals zero.
It's just sitting there.
So your initial momentum is zero.
After you have the mass of the rocket times its velocity, and the mass of the fuel times
its velocity, because they're separate, and so we can say P initial equals zero equals
P final, which is the mass of the rocket times the velocity of the rocket plus mass
of the fuel times velocity of the fuel, so we get the fact that they must move in opposite
directions, and depending on the mass of the fuel relative to the rocket and the speed
of the fuel, that gives me the speed of the rocket.
Pretty straightforward.
Now notice, this is a simplified version, because in a typical launch of a rocket, if
I'm going vertical, what is the one other thing I do have to worry about?
What else is around?
Gravity, and typically is that sort of launch instantaneous, or does it take time?
Takes time.
So there's a lot of fuel coming out over a finite amount of time, so depending on where
you want to know the velocity, if you want to know it, say, here's our rocket again on
the ground, and then here's our rocket up in the air, and all the fuel is gone, and
you know how fast it's going, in the absence of gravity you could figure out what the speed
of the rocket is, and then you can ask, okay, I know mg of the rocket, and it was going
up in the air for some distance delta x, and you could figure out the impact of gravity
on it, and recalculate the new speed.
If you want to find it at some time in between, you really have to worry about things like
the impulse being an integrated force dt, and work out the details, or there's other
ways you can do it that get even more complicated using fun differential equations.
But if you're basically looking at two key instants, or if you're launching something
horizontally where gravity doesn't matter, it works, so we can demonstrate this by using
our cool rocket, which is going to have a lot of air under high pressure, the air will
shoot out the bottom, that's our fuel, and our rocket will launch.
We all ready?
Assuming I don't get too tired.
Trust me, it really does launch.
I've been assured of this.
Now I'm starting to get nervous.
Particularly since the bike pump is getting very hot.
Oh, there it goes!
Phew!
Okay.
That was definitely the hardest demo we've done all year.
Okay.
Now, what's nice about that is you, whoa, now there comes all the dust.
You really get to see that the launching of the rocket is just conservation of momentum,
and one of the key things is, right, in this case, though that rocket has a bunch of air
in it, we'll do it in terms of magnitude now, right, because we know they went in opposite
directions, the speed of the rocket's really given by that.
Because this is often much greater than the mass of the fuel, right?
I mean, the fuel is just air, and I mean, air is pretty light, and the rocket, I mean,
this isn't the heaviest of rockets, but there's enough plastic here, it's heavier.
And so what it really comes down to is getting the velocity of the fuel to be quite large,
and that's why we really pumped it up to a high pressure.
Now if you switched, and how many of you have ever done this with water, made a water bottle
rocket?
Most people have if they've been in like, you know, Girl Scouts, Boy Scouts, or various
other things.
Yeah, it usually happens there, okay.
If you did Boy Scouts and you get into a water bottle rocket, go back and complain.
With water, you really increase the mass, right, of your fuel a fair amount, and then
you can get some really high launches, it goes quite well.
We can also do this, same basic idea, horizontally with a cannon, okay?
So of course, we have to ask a clicker question about our cannon, just to make sure we're
all on the same page.
So right here, we have our cannon ball, and here we have our cannon.
We'll load our cannon up, and then we'll fire it.
And the question is, when you fire it, does the cannon stay in place?
Does the cannon itself move backwards?
Does the cannon itself move forward, or will it depend on how fast this object is launched,
whether it moves forward, backward, or stays in place?
So go ahead and vote.
Excellent.
So the cannon's got to move backwards.
This is our basic recoil problem.
So just like with any good, you know, Civil War era cannon, we load it with liquid nitrogen.
Then prime the cannon.
We then have to get the cannon ball in backwards.
You thought that was fun.
Okay?
Now we take a heavier cannon ball, and maybe we use a little more liquid nitrogen.
We need a quick volunteer to hold the back end of my cannon here.
Come on down.
Because I was starting to freeze my hand off.
Okay.
Move out of the way.
That was just so dramatic.
Anyway.
Man, that was...
All right, well, we're out of liquid nitrogen, but there you go.
So the cannon clearly moves backwards, at least.
I will say the best time I ever did this, and I haven't been able to repeat it, is I
got enough liquid nitrogen, got that far enough in, they don't like me to do this, that the
top froze on the bottle.
So when it launched, the water sprayed everywhere.
That was kind of cool.
And it gave a little extra kick as the water came flying out the back.
But man, I am out of shape.
Those are tiring demos.
So there you go.
That's the rocket.
But it's important to look at this in a little bit of detail.
So if you see this on a problem, you don't make some of the common errors.
So what I want you to do, here's the cannon, right, and here's the cannonball.
Let's suppose this whole thing is up 30 degrees from the horizontal.
I want you to tell me, okay, figure out quickly on a piece of paper, how you might figure
out what the speed of the cannonball is if you know how fast the cannon is going backwards.
So see how you would figure out how fast the cannonball is going if you could figure
out how fast the cannon is moving backwards.
And whether or not there's any problem with that calculation.
So try that for a few minutes here.
So another way to think of it, you're given the mass of the cannonball, the mass of the
cannon, and you're given the velocity of the cannon after launch, backwards, okay?
Question?
And explosions.
We won't mention that.
Notice, consider the time of the explosion to be basically zero.
Let me ask you this.
Has anyone come across a problem with this problem?
You should have a problem with this problem.
No, no, you just need its velocity, turns out, but there's something else that's going
on here.
What direction is the cannonball traveling when the collision is over?
Up at what?
30 degrees.
When the collision's over, what direction is the cannon traveling?
Straight back in this fairly realistic problem.
And here's where we run into trouble.
Velocity delta p, which equals J, which is F average delta t, will be zero if delta t
is small enough.
The problem is, when I'm sitting on a rigid surface here with my normal force, unless
I tell you the actual recoil velocity of the cannon at 30 degrees, you're not going to
be able to solve the problem.
What's happened is, by telling you the cannon's going horizontally, I haven't really made
delta t zero because this normal force kept it from going into the floor.
So this is one of those tricky cases where you have to pay attention to the information
that you're given, because it is sometimes done this way in problems, where this is really
sitting on the floor, so even though delta t is very, very small, it's never exactly
zero, and the normal force can act very quickly, so you never see the velocity down.
You only saw the horizontal recoil velocity.
So from a recoil problem, you could only get the horizontal momentum.
So let's just do that real quickly, because what happens is I need to worry about x and
y, and in my initial state, v equals zero, so p total is zero.
In my final state, I have m of the cannon times the velocity of the cannon, and I have
the cannonball times the velocity of the cannonball.
But now, in my xy coordinate system, the velocity of the cannonball is that way, and
if I haven't given you the true cannon velocity, if I just give you that, right, when I go
to write down my x and my y equation, in the x direction, I'm okay, I have zero equals
mass of the cannon times the x component of velocity of the cannon, plus mass of the cannonball
times its x component, but in the y direction, I have zero equals some unknown number plus
mass of the cannonball times velocity of the cannonball on the y.
And it's this that makes conservation of momentum not useful for this problem, even though it
looks exactly like one.
So either I would have to tell you the cannon recoils down at 30 degrees with some velocity,
then you would know that, and you'd be okay, right, or I tell you something about f and
delta t to get the impulse, and you actually focus just on the cannonball and use f on
the cannonball, delta t equals delta p of the cannonball.
So that's where you have to make decisions, yes?
No, because you really, this problem and the information I gave you gives you no information
about the vertical recoil of the cannon.
You truly have three unknown things.
You have the cannon's velocity in the y direction, and then the cannonball's velocity in the
y and x direction.
So there's really nothing that allows you to actually get any further on this problem.
If I'd given you some information, say, about friction or about the normal force and the
time of the collision, then you could do stuff.
Then you would have things you could work with.
But with just this information, you're stuck.
And that was just kind of a warning problem.
Now, very commonly, though, you might have a slightly different problem.
You might have been told where the cannonball lands.
Now, in this case, and you might be asked for the x recoil of the cannon, now notice
you have enough information to find the cannonball velocity because you can do the projectile
motion problem.
And when I have the cannonball velocity, since I have both x and y by definition, I can do
that problem.
I now have enough information to go in that direction.
So there I would use conservation of momentum because I am allowed to conserve momentum
in just one direction.
Even though it wasn't conserved in the y direction because of the normal force, or I don't know
enough about it, that's okay.
I can still find the x by using conservation of momentum.
I know these get a little tricky, and that's why I wanted to kind of point this out.
Hopefully it will clarify as you do the problems, not confuse.
Questions?
Yes?
Right, so here what you did in this problem, if I told you a cannonball was launched from
a cannon, went 200 meters, landed at the same height as the cannon, it was launched at 30
degrees, what was the recoil velocity of the cannon in the x direction?
Then you would use projectile motion to solve for that, and then you would use conservation
of momentum in the x direction to solve for that.
So there, notice the difference.
There, these were both unknown because I gave you no other information, and this was
unknown because you really, the zero is not the actual velocity of the cannon in the y
direction after the launch.
It is actually moving down, it just gets stopped real quickly by the ground.
So by only measuring its x component, you're missing a piece of information, its y component.
What you want to do is solve for the full velocity of the cannonball.
Notice if I give you this, I can find that.
I just have no idea what that is.
This is the one I can't find.
Okay?
Yes?
Right, because you don't know the total.
You only have one side of the triangle and the angle.
You need two sides of the triangle to use trig.
Yes you do.
Sine is opposite over hypotenuse, cosine, I mean, sine is adjacent over, wait, no.
Sine is opposite over hypotenuse, cosine is adjacent over hypotenuse, Pythagorean theorem
is three sides squared.
All of my formulas with my triangle involve three numbers.
Oh shoot!
I gave you the angle, didn't I?
Oh, I am being so silly.
Does that really work?
Yeah, I guess that really works.
Dang.
Well, I still have my A, but yes, that really works.
Okay, I thought I cleverly came up with an example that would confuse you and now I have
thoroughly confused you.
A good way to end the quarter.
Thanks, everyone is saying, well, you've got three days to recover from my confusion.
But however, I would like to say for momentum conservation, my point still holds.
So if I hadn't given you the angle, you would still be in trouble.
If you notice, yes, I had given you the angle, which was bad, but in this conversation, I
totally ignored the fact that I had given you the angle and that's kind of what I meant.
I apologize.
That was really bad of me.
So everything I said up to now was true if you didn't know the angle.
When you watch the video, it'll all make sense because you can play it backwards from here.
Any other questions that don't show I'm wrong?
I'm impressed I made it this far.
Any other questions?
I may have to just go back and edit that part of the lecture so I look more intelligent.
Excellent.
Now, what we want to do next, having done this, is what I consider algebraically the
hardest part of the course and really I don't do a lot with it on the exams, but it's important
for you to see it.
And that is, what do you really end up doing with elastic collisions?
And here's the challenge why it's algebraically hard.
An elastic collision, now notice you have to be careful, listen very carefully, in an
elastic collision, as opposed to an inelastic collision, yeah, it's almost worse than molar
and molal, molarity and molality, which I can't either say.
I will have an object A and it'll have some velocity A, VA initially.
I will have an object B and it will have some velocity VB initially.
They will collide.
All sorts of things can happen.
I'm going to draw one possible case.
Velocity A, object A will have some final velocity and velocity object B will have some
final velocity.
So this is before and this is after.
Notice I drew them both going to the right afterwards.
That can happen.
They can both collide and be going opposite directions after.
They can both collide and be going to the left after.
However, this is one case in which we are dealing with reality.
What will not happen after the collision is that object A will be to the right of object
B and going faster.
Objects in the real world do not go through each other unless they shatter it.
So if you have a collision where object A goes through object B, a bullet through a
card, a bullet through an apple, a bullet through a block of wood, that will never be
an elastic collision.
That will be an inelastic collision because you've destroyed stuff, you've lost kinetic
energy in the destroying of stuff.
So when I'm talking about elastic collisions, I can never have that on the other side of
that.
Notice I have four unknowns.
Now I have basically two equations.
It's an elastic collision so the change in kinetic energy is zero and notice how many
variables I have.
Lots of room here to make a typo.
After the whole angle debacle, hopefully we won't.
Now the textbook uses primes for final velocity.
I prefer to actually write the I and the F because, I don't know, I get lost with the
primes.
That's just me.
So that's the kinetic energy formula.
Momentum is conserved because it's a collision.
Keep in mind these are vectors.
You can see how boring this is already as you fall asleep while I write.
So I have four unknowns, two equations.
So in this collision, if I give you two of the unknowns, which is usually what happens,
you can solve for the other two.
Now if I'm doing this in two dimensions, so if I have a collision where say I'm shooting
pool and the pool ball comes in, hits another pool ball, and they go off that way and that
way, then I need x and y and for momentum I need to use components.
So I do gain another equation but I'm dealing with x and y components as unknowns as well.
So it's fundamentally the same issue.
It's roughly two unknowns, two equations with four potential unknowns.
So I have to give you enough information and what makes it worse is the algebra is very
nasty because these are quadratic.
So they tend to be long.
They tend to be ones you have to be really, really careful with your algebra.
There are some homework ones where I have you practice these full nasty ones.
What I want you though to focus on for the exam is really the special case of 1D because
if I'm moving only in one dimension, all I have to worry about is say that x component.
And now life is just a little bit easier because if I'm clever, first of all, it always helps
to quickly multiply this equation by 2 because everything has a 1 half, then you don't have
to deal with your 1 halves.
So if I write down my two equations and I'm doing it in 1D, what I really have is I can
rearrange things.
So if I want all the mass of A on one side, the momentum equation looks like this.
And notice the difference.
What's the difference between the left-hand side and the right-hand side?
Anyone?
It's actually important.
On the left, which is first?
Initial.
And on the right, which is first?
Final.
That's just because I chose to put the A's on the left and the B's on the right.
Nothing special, but that's important.
The minus signs are different.
Same thing with my kinetic energy.
Now can anyone tell me why that might be useful, what I just did?
There's two things you should notice about that.
By writing the equations that way, I've gained two things.
What have I gained?
We did this way back with some of our kinematics problems for solving them.
And I purposely wrote them right under each other.
What can I now do with those two equations and get rid of?
I can divide them and what goes away?
The masses, right?
So if I divide the bottom by the top, the left side I can cancel my MA's and on the
right side I can cancel my MB's.
How many of you remember your cool factoring formulas from Algebra 1?
How many remember what A squared minus B squared is?
Yeah, you can admit it in public, it's cool.
Being a math geek is now cool, it was just announced, sorry.
What is A squared minus B squared?
A lot of whispering.
A plus B times A minus B. And the same thing over here.
So notice, when I divide I get to cancel that and, whoops, I don't know why I wrote
a B there, see I told you there'd be a typo, and I get to cancel that.
So I actually get a new equation, which if I reorganize as before, so this is one of
the few equations that's not on my formula sheet, but it is useful to know.
It's not on the formula sheet because it's an incredibly specific situation.
If I have an elastic collision in one direction, one dimension, I get to use this, this is
the equivalent of conserving my kinetic energy, and then I also get to use my momentum equation
that I had before.
Keep in mind that everything in here has an actual direction now, right, so it might be
plus or minus.
But now I have two equations and two unknowns that are much easier equations to use because
they're not quadratic.
So these are the ones you would actually want to use if it was elastic in one dimension.
So it's a rare moment where there is an extra equation that's worth knowing.
Any questions on that?
Yeah.
So all I did here was I took my kinetic energy and my momentum equations, right, and since
I had a difference of two squares, I factored it, and then I took this equation and divided
by that equation, so the minuses and the masses canceled out, and all I was left with
were the pluses, and that was my error there.
That's a plus two, okay?
It's a pretty easy equation to use.
I'm not really going to do any examples with it.
This is a very small part of it, but you do need to know it.
Now, before you pack up, because we still have five minutes, as a preview to our review
of the class on Wednesday, as a preview to studying for the final, it is very important
as you go back over everything to keep in mind, I think, the following questions.
Now that you've seen every part of the course, you want to be able to think in terms of motions.
Somebody name for me some motions we've used in the course.
Well, kinematics is a physics.
We've used it most often with what motion?
Projectile motion.
What's another motion that we've had?
Circular motion.
What's another motion that we've had?
Now some of these I haven't used the name before, but I'm just, collision and explosions,
and there's one more I never gave a name to, so I'm just going to tell you.
It's all our motion along a surface, right?
Down a ramp, up a ramp, along a flat horizontal plane.
All of our motions on surfaces which either had friction or were frictionless.
If you can identify the motion, that's a big step towards knowing what you need to do to
solve the problem.
On the other side, some physics we used was constant acceleration versus centripetal acceleration.
Two different types of accelerations, which is basically kinematics.
Kinematics was describing motion.
The other thing we did, and keep in mind this had to do with situations that were instantaneous.
Yeah, we'll just stop there.
Was we used Newton's law, F equals MA, because it just had to do with the instant.
The other physics we used a lot was when we were worried about a before and an after.
We had some change in the state of the system.
We took some version of work, change in energy, or momentum impulse, and these became our
conservation laws when appropriate.
And really, on this one page, if you add in all the definitions that we needed to make
this work, and if you think about it, right here we basically had three definitions, position,
velocity, acceleration.
Right here we had, I don't know, I'm trying to think how many forces we had.
You know, we had four or five definitions for all the different forces.
Energy, we had four energies.
And momentum, we have one definition, what momentum is.
That's kind of those two sheets reorganized in another useful way.
And as you review problems, as you study, keep in mind the challenge for the final is
to be able to put two or three of these together in one problem.
And that's why recognizing what you did at each individual problem, what were the key
words.
When I sit in a lecture, we know it's a this type of problem because of this.
That's going to really help you a lot.
So Wednesday, a great review lecture with a lot of cool demos.
Friday, your test.
Have a good week.