Description: Chem 1A is the first quarter of General Chemistry and covers the following topics: atomic structure; general properties of the elements; covalent, ionic, and metallic bonding; intermolecular forces; mass relationships. General Chemistry (Chem 1A) is part of OpenChem: http://ocw.uci.edu/collections/open_chemistry.html This video is part of a 23-lecture undergraduate-level course titled "General Chemistry" taught at UC Irvine by Amanda Brindley, Ph.D.
Recorded March 6, 2013
Index of Topics: 0:00:17 Quantum Theory: Structure of an Atom 0:01:50 The Birth of Quantum Mechanics 0:03:17 Development of Atomic Models 0:05:09 Electromagnetic Radiation 0:06:11 Properties of Waves 0:07:25 Transverse Waves - Frequency 0:10:16 Electromagnetic Waves 0:11:23 Electromagnetic Spectrum 0:20:59 Plank's Quantum Theory 0:27:52 Black Body Radiation 0:34:19 Light: A Wave or a Particle 0:35:29 Photoelectric Effect
Okay, so today we're going to be talking about chapter one
and this will take us about three weeks and up through the first midterm
so chapter one covers everything involved in quantum theory
or I shouldn't say everything but at least what we're going to cover in this class for the most part
so we have a lot of things to cover
we're going to start with just general properties of
waves and electromagnetism because you need to have that as a backdrop
to be able to talk about all the rest of the things and how we actually sort of
build up an atom or how we think about atoms
now from that point we can kind of go on and we can start talking about the Bohr model
which we've already been introduced to a little bit
where you have the protons and neutrons in the nucleus and the electrons going around the outside
but what we'll see is that this only really works for the hydrogen atom
and other ions that have one electron
so we'll start there and we'll talk about
many things there such as transitions and things of that sort
at which point we can move on and talk about more complex systems
but within the hydrogen
we can also then go on and talk about de Broglie wavelengths
and quantum numbers
and then from there we'll start talking about multi-electron systems
atoms with more than one electron
and this is where we can start really getting into the idea of quantum numbers
and how electrons are actually distributed within an atom
whether we'll see that they don't actually orbit the nucleus in some sort
of circular pattern and we'll see exactly what that looks like
and how we came about that
that solution you may already kind of know about s-orbitals and p-orbitals
from your other classes
we'll be able to finally see how those are actually derived and what those actually
look like
and why we know that's what they look like
we're going to cover a lot of different theories and principles so I have them
listed out here for you
and we'll talk about each of those as we hit them
so first a little bit of a history lesson for you
since this is important in the development of how these atom
models came to be
so before nineteen hundred or so
we always thought of atoms and molecules as just these rebounding balls you can
kind of think of them as billiard balls in three dimensions
they were just sort of bouncing around
and we knew that there was more to it
we didn't exactly know how
so this is the basis of theories such as ideal gas law which we'll cover at the
very end of this class
uh... and it still works really well to describe certain phenomena we can still
use it for the ideal gases because
for the most part it works
but this wasn't the whole story
and evidence kind of showed them that it wasn't the whole story
so around nineteen hundred
uh... max plant came along
and this is when he was able to say well
molecules and atoms
they're only emitting certain energies and we'll talk more about exactly what
emitting energies mean and how that works in a little bit
but that was a really important discovery
because at that point they knew there must be something called quanta
an amount of energy that you could have
and this meant that there wasn't a continuous level of energy that these
electrons must have some rules associated with them
and this turned physics upside down they knew at this point
that there must be something massive that they weren't getting
that was important to look at
so we'll be able to sort of trace this line of thinking
through the development of the different molecular models
we have the plum pudding model
which was one of the really early ones
they knew that there are some positive charges and some negative charges
uh... in the atom and they just didn't know how they were distributed so they
were always trying to come up with how are what do these atoms look like
so in the plum pudding model that's exactly what it sounds like
you have this sort of blob of
positive charge
and then suspended in that blob of positive charge is all sorts of little
negative electrons
uh... so you can kind of think of it like little raisins suspended in plum
pudding
once Planck came along and said well
energy is quantized there must be something else happening
that was when they said well
there must be something else going on
Rutherford kind of refined this quite a bit and said okay
well all of your positive charge is now in your nucleus
he went through and did an experiment that showed that
all the positive charge was in a very small space
that didn't take up very much of the electron or very much of the atom
so they knew that there must be something
that later on would be called a nucleus
at the time it wasn't termed that
now then once quantization came about this concept of different energy levels
that Planck discovered
Bohr was able to take Rutherford's model and say okay
now let's refine it a bit more we think there's these energy shells
and the electrons are in the energy shell
now this Bohr model is probably what you've
at least seen in high school
and we're going to use this for a little while
it's great for one electron systems
but after that it really breaks down
so in high school you may have learned that you had two electrons
circling the
first shell and then eight and then eight
and we'll see that there's some similarities to that
in the later ones too
now before we can talk too much more about atoms
we need to have a backdrop of what waves and electromagnetic radiation is
because without knowing that we can't really go on with talking about
hydrogen atoms and other atoms
first of all what is electromagnetic radiation
well a lot of what we see in everyday life is covered in this
you can talk about any sort of light
that we see
or even things like heat, heat falls into the IR category
microwaves
sunlight
any sort of light that you see from light bulbs
x-rays, these are just kind of a smattering of the different
types but pretty much anything within this you can count
radio waves is another one so there's lots and lots of types of
electromagnetic radiation
and we'll talk about what makes each one of these
completely different here in a minute
because obviously microwaves x-rays and sunlight and you know fire heat doesn't
all fall into the same category in our lives
so some things that you need to know about waves and need to be able to define and
figure out from information I give you
so you can, we'll be talking mostly about transverse waves
but there's actually two different types
so the transverse waves is things you can think of light waves and all our EM radiation
but maybe in real life you're better off tying it to thinking about things like
guitar string
or if I took a jump rope and I went like that and kind of made a wave out of it
all of these would be transverse waves
where you get this
crest
and you can see that we have something called an amplitude which is how high it
comes from the zero
and a wavelength which is from one peak to the other or really any point on the
line to that exact same point later on
and we'll talk about a few other things that we can calculate from this in a minute
just so that you recognize that there are two types of waves while we're
talking about waves
and that they all have the same properties we can define all the same
definitions it's just a little bit different in look
we also have a longitudinal wave
and we won't be talking about that much in this class but in your physics classes
you'll talk about them as sound and pressure waves
so now a little bit more about transverse waves and exactly what you're going to need to
be able to know
in this class
so here we have just sort of a simpler picture of it
and once again we see the amplitude
and we see the wavelength
now we have something else and that's called nu
or frequency
so this is not a V it's a nu it's kind of a squiggly V
and make sure you notice that because we'll be talking about both V and nu
in this chapter
and because the computer fonts make them look very similar you're going to have to
know what they are based on context
and that shows up in a lot of cases
so what nu is is this
kind of it's not speed you don't want to think of it as speed
but it gives a measurement
of how much you can get from here to here
how many cycles you can get in one second
sometimes that's a little bit hard to think about in terms of a wavelength
but it's almost easier to think about in terms of spinning
so if I take and I spin around in a circle
and I do that once per second
that's my frequency would be one hertz or one cycle per second
same idea here
if it gets from here to here in one second
that's one hertz or one cycle per second
and so that's how you want to think about frequency
now we can relate frequency and wavelength together
because if you think about it the shorter the wavelength
the more
cycles you're going to have in one time period
and so because of that
we can relate the two together
now they're related by c
which is the velocity right
and because we're talking about light
we're talking about the speed of light here
and so if we want to calculate nu or we want to calculate
lambda or wavelength
we can go back and forth by using the speed of light
in using this equation
now I kind of mentioned this off
the units for nu
or frequency
is seconds inverse so that's one over seconds
or we can call that hertz
and the two are completely interchangeable
so you know you get asked a lot well
do I have to know what hertz means?
yes because I can tell you
well here's the frequency in hertz
and if you don't know that that means cycles per second you might have some
problems
so make sure you know that
now lambda or wavelength
which is your distance from one peak
or one point on the wave to another
that's a distance
that's how far is it from one point to another
so that's just in meters
you'll see it done in nanometers a lot
and that's because visible light tends to fall in that nanometer region
and so because of that there's a lot of times where it's just simpler
to say 550 nanometers
than 5.5 times 10 to the negative seventh
and so you want to get really good in this chapter at converting to nanometers
and converting between all your metric units
so if you don't remember how to do that that's you know all in the fundamental
section
now one more backdrop that you need to have sort of in your mind about how
electromagnetic waves work
is that there's actually two components to this
and in real research in real life we can make use of both of those components
there's an electric component and a magnetic component
now you'll notice if you look at this and you can kind of see the blue and you
can see the red
that these are going to have the same wavelength and the same frequency
the only difference is what axis they're on
if the electric field component is on this axis
then the magnetic one will be on this one
so they're ninety degrees to each other
so we're not going to do too much with this
it's just you need to have this sort of in your background
now because they're an electromagnetic wave they travel at the
speed of light
and so here is the speed of light for you and we'll be using that quite a bit
now let's go back and talk a little bit about why all of those different
electromagnetic waves that I talked about are so different right we had x-rays
and microwaves and light and heat
what makes all of those so different from each other
so here we have the electromagnetic spectrum
and I have it listed out from or I suppose this figure has it listed out
all the way
now this little section
right here is blown up so that you can see it
because that's the visible wavelength that's so that you know that's kind of
special to us because we can see it
but what you'll see here
is that you have your radio waves your infrared which is heat
and then your visible
and then your ultraviolet
x-rays and gamma rays
now this shows you the difference right here
you can see over in this section
you have a really long wavelength
and over here you have a really small wavelength
or in other words you have a really high frequency right here
there's lots of cycles in one little area
and a really low frequency here
we haven't talked about how that's related to energy
but now we can a little bit
and we can say well
as you increase
wavelength you make the wavelength bigger
you stretch it out
you're going to have a slower frequency and you're going to have a lower energy
so things down here are really low energy
really low frequency
and really long wavelengths
so what makes
radio waves different from something like x-rays which we can actually
use to visualize our bones
is all in the frequency or wavelength
so we sort of went over this already but let's look at it again
as wavelength increases
it's going to take you longer to get from one cycle to the next
which means what's going to happen to your frequency?
it's going to decrease
now let's look at this and say well which has a greater frequency
red light or blue light
now frequency isn't really listed on here
but we know that frequency and wavelength are inversely related
as frequency gets or excuse me as wavelength gets bigger
frequency gets smaller
and vice versa
so if you look at this and you say which one has a greater frequency
red light or blue light
it's going to be blue light
now which one has a greater energy we haven't done a lot of talking about how to
calculate energy
but we can see that
here
this is going to have more energy because you have a much faster
or a much higher frequency and a much lower wavelength
and so your blue light will have a higher energy
now does blue light have a greater speed?
we've said that it has a higher frequency
and that it has a higher energy
so now
does it follow that it has a higher speed?
no they all have the same speed right?
it's all going to be the speed of light that doesn't change
so all of them are going to have the same speed
but the frequency and the energy and the
wavelength are all going to change
now even though I don't ask you to memorize this by any stretch
it is good to have a general idea especially in the visible range which
ones are higher energy
and it's good to know that things down here are lower energy than things up here
and there's an easy way to remember this thanks to this little comic by
Foxtrot
you have the little kid who he's you know kind of a smart genius kid in
the comic
and he walks into a store and he says do you sell ultraviolet blue?
the shopkeeper says well excuse me
well what about regular violet blue?
no, blue bull?
no
green? yellow? orange? no no no
okay rats I'll take a red bull
so then he says I was hoping for something a little higher energy
and then his friend says well at least it was an infrared bull
so you know the joke being that we talk about red bull being full of energy
well red is the lowest of the colors we can actually see
we should really be looking for blue bull or ultraviolet blue
or ultraviolet bull
now it turns out shortly after the first time I showed this comic go to my
students told me that they actually do sell a blue bull
I got all excited
turns out it's actually just blue raspberry flavored
so uh...
unfortunately there is not just a higher energy
let's do an example exercise
so
we have a wavelength of green light from a traffic signal and we know that it's
centered on five hundred and twenty two nanometers
and we need to know the frequency
so when we look at this
we know certain things
I have to excuse some of the patterns my own computer crashed on me last night so it's
been completely changed
some of the animations got messed up
so we know this and
when you're first starting out and doing a lot of chemistry problems it's a good
idea to go through and write everything out that you know
and put it in a little table so that you can fill into equations or maybe figure
out what equation you need
so this is sort of a good technique when you're first starting out to just write
down
here's what I know that I think is going to be useful in this problem
so you'll see here I have the speed of light written down
and I have the wavelength that was given
and then at this point I can kind of say well I need frequency so I'm probably
going to need to be using this equation
so the first thing you want to do is this is in nanometers
and this is in meters so we have to put them in the same unit
technically it doesn't really matter what unit you put it in but in most cases
it's best to convert to the SI unit or the base unit in this case so the meters
and so we do that
so we divide by ten to the ninth
some of you might say well can I multiply by ten to the negative ninth I thought
that's how I did it
you can do that too either way is fine whatever way you prefer
and so we get this we get 5.22 times ten to the negative seventh meters
at which point
now we have meters per second in meters and we can fill into here
so we fill in our speed of light
we fill in our wavelength
and we solve
now we need to check for sig figs in units always right? You won't get all your
points on your exam if you don't do that
so we need to say well we have
three significant figures
uh... this is infinite don't forget that's infinite sig figs because it's a
definition
and so we put in speed of light to have three to match
and so we're going to round to three significant figures
now notice I changed this from seconds inverse to hertz
doesn't really matter if you do that or not you can put both of them or either
one of them there
either one is right just make sure that you know how
that they're actually the same thing so that if I give you something in hertz
you know that you can just fill in hertz into this equation and solve for lambda
if need be
so now let's do some more examples and we'll actually just work these over on the
document camera
for a change of pace
so here we have the frequency of radiation from your microwave is a
hundred and twenty gigahertz
we need to make sure we know what giga means so this goes back and tests all that
that stuff that I asked you to study in the fundamentals chapter
so we need to first convert that we can't have a hundred and twenty gigahertz
so we need to go ahead and change that
times ten to the ninth
so this is sort of the opposite
we now have to multiply by ten to the ninth
now something that's kind of useful to get used to doing here
is I'm going to show you how I would actually write this conversion factor
because I'm not
you're not going to give this to me as an answer you're going to use it in
something else
so rather than go through and type that into your calculator and risk making a
mistake
it's completely okay to just write out a hundred times
ten to the ninth hertz
and then use that for all your calculations and it saves you a little
bit of time a little bit of button pushing and a chance to make any
mistakes when you're button pushing
so now we look at our equation and we say well how
how do we solve
for wavelength
so that was the version of the equation I gave you
you'll have to look at your equation sheets to see what I gave you on the exam
either way we just need to solve for lambda
so however the equation is written
we're going to solve for that
so we can fill in our lambda equals c over nu
wavelength equals the speed of light over frequency
and then we can fill in all our values
and we can bring down hertz here
now of course you can never leave an actual answer in
a hundred and twenty times ten to the ninth but it's fine to fill it into an equation
and we get our answer
and we check all our sig figs
and I chose to use two here because we only had two here
and so it doesn't matter how many I filled in for speed of light I needed to
fill in at least two probably three would be better
I happen to fill in four
but this sets up that we can only use two
so now we have one more
and now you're kind of
getting the
that one's for next time
we'll save that one for just a moment
so this is a problem I have set up for you guys to do at home
so I have the answers for you there which isn't included in your worksheet so you
may want to write that down
and you're going to do this one exactly like how we did that as extra practice
so now moving on a little bit so you get a little bit more of a history lesson again
we have Planck's quantum theory so this is going to go into a little bit more of
what Planck actually discovered
so he says that when solids are heated
they emit radiation
and we can see this to some extent in everyday life
well maybe not lava in everyday life
but you know that lava glows red
you know that if you turn on an electric heater it's going to glow a little red too
and a light bulb of course and other lights
now they knew this before Planck this wasn't something that was a secret or anything
now the difference was is they never could really explain it
they could get close
but whenever they would try to mimic the pattern of how solids did this
it always really messed up either the far on one side or the far on the other
they could figure out the middle and they could explain the middle
using all of the atomic models they already had
but either the UV or the IR areas you know far out in the directions it would mess up
now once Planck came along and said well
okay these molecules are not actually emitting a steady stream of light
they're emitting energies at very specific or they're emitting light at very specific
energies
and that we're going to name these quantum
that changed things
so what a quantum is is the smallest quantity of energy
and that's going to have an equation and that's equal to
E equals h nu or E equals hc over lambda
whichever way you want to think about it
whichever way is useful
so you want to think of this quantum as a little energy packet
and it's the smallest energy packet
so lots of things in life are going to be quantized
you don't want to think of this as some sort of weird concept
it's not that bizarre when you think about it
so something you can think about in everyday life you know our money system is quantized right
you can't really get less than a penny
now you know sure with
modern accounting techniques they do things like that
but if you're talking about just trading cash money
you're not going to have less than a penny
and so that's kind of a quantum right
you can't have half a cent
and hand half a cent to someone else
so just think of this as the smallest unit of energy
now h is called Planck's constant
and that's six point six two six times ten to the negative thirty-fourth
no you don't have to memorize but yes you'll probably have it memorized by the
end of this chapter because you're going to use it so much
and so this is just a constant that you're going to fill in to there
that gets you to the answer that you need
so now we have another example exercise
so we talked about a green traffic light in our previous problem and we said that
the wavelength was five hundred and twenty two nanometers or you know most of them
were five hundred and twenty two nanometers
we had calculated the frequency doing that
now I say find the energy
so once again here's what we know
we know c we know lambda
uh... and I went ahead and converted this right here so we have it
now we also know this
now you may say well can I use e equals h nu too since I know nu we figured that out
in the last problem
sure you can in general you don't want to use things that you've already
calculated once using that in another problem if you can avoid it
if you can't avoid it and you obviously have to that's fine
but you don't want to have to uh...
if you can avoid it you want to because if you got nu wrong
now you're going to get this one wrong so we're going to go back and we're going to use
lambda which was given in the problem
so we have our equation
and we can fill everything in
Planck's constant just gets filled in as is
so joule seconds
we fill in c because that's just a constant so we know that
and then we can fill in lambda
making sure that we match the units here
and here
it's always good when you're filling in these equations to make sure all of your
units work
so you can watch meters cancel here
you can watch seconds cancel here
and that leaves us with a unit of joules which is an energy unit so everything
should work out fine
and we get three point eight one times ten to the negative nineteenth joules
so that is that we have our right unit
and we have our energy
so that's the energy of a green traffic light
let's do let's continue on with the problem that we were doing before
now we're going to find the energy
of our microwave
so
this time we're given hertz which means that we'll start from
E equals h nu
and we fill in h just as from the slides
watching our units
now we have to fill in the hundred and twenty of course we can't just fill in a
hundred and twenty we need to
convert this to hertz
and I'm going to do it right within the problem
so I'll just multiply times ten to the ninth here and call it hertz
so sure improper scientific notation once again
saves some time and doesn't hurt the problem at all
so then we come down here
we type that into a calculator
we figure out how many sig figs we need
now notice I took hertz here and I cancel hertz in seconds
you know that's one of those you want to keep in your head what hertz means
it really means inverse seconds
it really means one over seconds
so that's going to cancel there
now let's round to the proper sig figs
so h doesn't matter
this has two
and so we need to round to eight point zero
times ten to the negative twenty third joules
so now that we've done this
we've seen that E is equal to h nu
we've seen that we have h
and that we have a hundred and twenty gigahertz
and we've noticed that hertz
is equal to one over seconds so that will cancel here
and we can go ahead and we can say well
since E is equal to h nu
we can fill this
in with this
now if we get this in our calculator
we need to make sure that we still go ahead and figure out our sig figs
so we have two sig figs here
so we bring these two sig figs down
we have eight point zero times ten to the negative twenty third
so just like what we did in the slides
only with our other equation
so now
on the slides I sent you home a couple of similar exercises to do
and so go ahead and you can write down those answers if you need them
so moving on with this idea of black body radiation now
this is the idea that
all of our solids emit some sort of light
and you might say well okay that's fine but when I look at you know
this countertop it's not emitting any light when I look at whatever it's not
emitting any light
and yet when you look at something like a heater or an electric stove or
something of that sort now you start seeing red light
so what's the difference between something that's just sitting
and something that's glowing red hot
well kind of gave it away there right? It's glowing red hot
so that's because it's warm the temperature is increased
and that's why you start to be able to see
the glowing
now if you look at something even warmer like the sun
or you know some some other stars out and about
you're going to get white light or you look at you know
from the light bulbs you get white light
so what you're actually what the problem is is the reason we can't see all
black body radiation is because it's not in the wavelength that we can see
our eyes only see certain wavelengths
and we don't see wavelengths until it hits certain temperature
so that means that the temperature affects what
wavelength it's emitting
so here we have a graph
that this is intensity
this is wavelength
and so as your wavelength increases
you have your wavelength over here and what these lines show you is
the profile of what wavelengths are being emitted
so if we have something at three thousand kelvin
arguably pretty warm
this will go ahead and it has this distribution
so you only see a little bit of light here
and most of it's sitting in the IR region
now if you go up to four thousand
well now you see a lot more light that's in the visible region
your lambda max is still here
and then here and then here
so each one of these temperatures
shows you where the distribution
of the photons are
so what this graph means by intensity is how many photons or what
percentage of photons
have that wavelength
so you can kind of think of it like your grade distributions that you're used to seeing
how many people have an A? How many people have a B? How many people have a C?
well this is how many photons have this wavelength? How many photons have this
wavelength? How many photons have this wavelength?
so it's the same idea
and you can see as it gets hotter and hotter and hotter and hotter
it moves over more and more into the visible wavelength so we can see it
so that's why we're able to see things glow hot, the hot things glow
but we aren't able to see things at room temperature glow
now if you look at an incandescent light bulb
they glow, they have about a twenty seven hundred to thirty three hundred
temperature range
so given this graph, look at it for a second
why do you think incandescent bulbs are so inefficient? We don't use them
anymore because of this
if you think about where would its profile be?
its profile would be like here, right?
so when we look at an incandescent bulb
most of it we can't see, it's giving off plenty of light, it's just most of that
light is in this region
which is that region, the region right below our visible spectrum would be the
IR region which we
colloquially call heat
so most of the electricity that we put into an incandescent bulb
is coming off in a region of the spectrum that we can't see
it's coming off as heat
and so that's kind of useless to us, we don't need to heat
our houses with incandescent light bulbs, we want to light them with incandescent light bulbs
so something like a fluorescent bulb
does a better job of lighting
with less electricity because it falls into these higher ranges
so another example exercise
so
in this case
now we're looking at Proxima Centauri, our nearest star
and it's a red dwarf star
now it's about 4.2 light years away which we don't really need too much for
this piece of information
but we know that it has an average surface temperature
of 3,042 kelvin
so we're going to work this problem a little bit backwards
from what an actual astronomer would do, which an actual astronomer would take
and say
well we have
a uh...
we have this this wavelength spectrum, they would have computers draw it out
that can see all of the different wavelengths
and they would find the temperature of the star
in our case we're going to just work it this way which is a little bit backwards
so
we have this equation from the previous slide
as far as why it's in millimeters, it's just kind of the standard way of doing it
so when we find this
we're going to end up with a millimeter value
so we'll solve this equation for lambda max
so in this case
I converted
that constant that's in there
to meters first
you could do it two different ways, you could just fill in and then get your
wavelength in millimeters and convert that
or you can convert this to meters, either way is fine
and then for the sake of significant
significant figures there's also a zero there
kelvin we fill in as is
and we get this value
now
if we look at what region of the electromagnetic spectrum it is
it might be a little bit easier to go ahead and convert this to nanometers
just for the sake of looking at this
which comes out to be 952 nanometers
so depending on how much you remember from the previous slides that we've done
this lines up right in the near IR region is what we call it so
it's near where we can see but
it's still in the
IR region which is right next to
the red part of our visible spectrum
which is why when we look at a red dwarf that's where it gets its name from
because the only light that we can see coming off it is red
and so we see it as red now sure there's this whole other profile that's in the IR region
but we can't see that
and so to our eye we just see it as a red
and so that's where it gets its name from
moving on to some more history
so throughout all of modern-ish history I guess you can't really call
300 BC modern
but you know even back then there was some argument about what light really was
and whether light is a particle or whether light is a wave
so what does that fall into?
so this kind of went back and forth back and forth as each group
figured out what
they figured out a little bit more experimental evidence was that that was a
little bit better than the last person's and sort of proved the last person wrong
and once we started getting into you know this region now there started being
really good experimental evidence either way
so it wasn't until Einstein came along and said hey you guys stop arguing it's
both
so
we're going to go through and we're going to walk through and say well
why is light like a particle why is light like a particle and why is light
like a wave
and see some of this wave-particle duality that we call as we
call it
so first of all
why is it a particle what can what treatment shows
that it's like a particle
we have something called the photoelectric effect
and the idea of the photoelectric effect
is that
you shine light onto a metal
and when you do that you eject electrons
so the idea here is that
you're you're
and there's a lot of different rules for exactly what it can be
but you're ejecting electrons from a metal surface
with light
and I should also mention this is actually what Einstein won the Nobel
prize for so
in common culture he might be best known for his theory of relativity but this
this is what
got him a Nobel prizes so it's
you know is obviously very very important
so
now comes the part where we sort of show it's particle
the energy of each photon has to be higher than what we're going to call the
threshold energy
which means that
it has to each photon has to have a high enough energy
or think about how is that related to frequency a high frequency
in order to go ahead and eject an electron
if you don't have that per photon
it doesn't matter how many photons you shine on it you can just
you know blast it with as much intense light as possible
but if it doesn't have that minimum frequency it's not going to eject an
electron
now we call that minimum energy the work function
so for example
violet light can eject an electron from potassium
but if you shine red light on it so remember a little comic with foxtrot
and you know we know that our blue and our violet are higher energy than our red
so violet light can eject an electron from potassium but it doesn't matter how much
red light
you're never going to get any
so if you shine a little bit of violet light on potassium metal
you'll get a little bit of electrons
if you shine a bright violet light
on it meaning more intense
you're going to get tons of electrons
now if you shine the brightest red light you could possibly find on that
potassium metal
you're still not going to get any electrons
so what is the threshold frequency how can we find it
well we can use E equals h nu to determine it
and then you just have to take off the work function
so we'll do some examples of that in a minute
so this is one of the major things that show the wave particle
duality of light
if you want to do kind of a lab
a computer simulated lab on how this works
I would suggest going to this webpage they have a great simulation on it
uh... it works best if you play with it on your own rather than me showing you
how to play around with it
so I'm going to leave that for you guys
but you know go there
and play around with it a lot it will really really help you understand on
your homework
and understand all the conceptual questions I asked on the exam
what's happening so
consider that a homework assignment just like everything else
now looking at this in a little bit more detail
so this is the potassium example I had
from before where I just sort of talked it through
now if you go through and you put in just
enough energy to knock the electron loose
in other words it's going to be exactly the energy of the work function
just a reminder work function is the lowest energy you need
to eject an electron
if you put on exactly that much
it's not going to have any
the ejected electron won't have any energy
you're putting just enough energy in to knock it loose
but not enough to give it any energy at all
now if the energy of the photon is higher
than the threshold
so it's higher than just that work function
now there's extra energy there where is that extra energy going to go
well it has to go somewhere and where it goes is into the kinetic energy of the
ejected electron
so if you increase the energy of a photon
it increases the kinetic energy of the ejected electron
so
here
if we look at this example
our red light
our lowest energy of the three lights comes in
and that's not at the threshold frequency
and so that's not going to eject any electrons
now
if you put in green light
that's high enough energy to go ahead and eject electrons
and it's going to do so at this speed
now let's increase the energy again
into violet light
so we get
a much higher energy
now things to sort of note here
and when you play around with that simulation you'll note this to some
extent too
if you put in one photon
the most electrons you can get is one electron
so if you want more ejected electrons
you have to put in more photons
just increasing the energy isn't going to make more photons come off
it's just going to make them come off with a higher speed
if you're below the threshold frequency
no photons are coming off at any speed you're just stuck there
you need to make sure you know the difference between intensity
and energy
so the difference in intensity and energy
is
if I take
these lights
and I do that
or I do that
I've just decreased the intensity of light
I haven't changed the energy
but I have decreased the intensity
if I wanted to change the energy
this light doesn't actually work because it's white light so there's
a spectrum
but let's say I had you know little flashlights here and I shined a red light
if I want to increase the energy of those photons
I'd have to change it to blue light
so energy is very different from intensity
intensity is talking about total energy
so if I wanted to make a red light more intense well I'd
turn on two of those same red lights
if I want to make a blue light more intense I turn on two of those blue lights
but that doesn't speak to the energy of the photons
that's all about you can think of it as color if it's in the visible region it's
what we see as color
if it's in the non-visible regions the idea of color doesn't work so well
so if we want to figure out
this kinetic energy
it's what's left over after you take out the work function
so we see h nu in here
or hc over lambda works too
that's our energy of a photon
so the incoming photon
and we just subtract out the work function we say okay well
there's a certain amount of energy of that photon that's going to be taken away
it's going to be taken away
and put into actually knocking that electron loose
so we subtract the w
and that gives us the kinetic energy
now what do we think happens if the intensity of light is increased
but the frequency stays the same
so remember we talked about intensity we said it's just more and more and more
light
it's shining three bulbs instead of one bulb or ten bulbs instead of five bulbs
so if we increase the intensity
are we increasing or decreasing the number of photons
well we're increasing it right what our eyes see as being more bright
means that more photons are hitting our eye
and so increased intensity
means more photons
and the more photons you put in
the more electrons you're going to eject
so in that case you would get more
just to restate that one more time
as you increase the intensity
you increase the number of photons
thereby increasing the number of ejected electrons
so let's walk through and do an example on the board with this
so we have calcium's work function so now I've actually given it a number
we call it a work function but in your guys' case it's always going to be a
number
that I'll either give you or I'll give you enough information for you to find it
and I ask what is the minimum frequency of light for a photoelectric effect
for calcium
now I could ask that a little bit differently I could say what is the
threshold frequency
I could ask you the energy I could ask you the threshold energy
so make sure you know that term threshold that just means the minimum
I could also ask you the maximum
wavelength of light so keep that in mind
minimum frequency corresponds to maximum wavelength
so then I say calculate the kinetic energy and that's something that you're
going to see a lot in this chapter
you're going to be
doing two or three things with these equations
working back and forth
so we're going to find the minimum frequency and then we're going to find
the kinetic energy of the electron
if we now put this in
so the work function
will tell us the minimum frequency of light you need
and then we can find the kinetic energy of that
two different problems
I wanted to put this in here like this because you will see this in your
book and you'll see this
on the internet and other random sources
so this is just another way of writing the work function so don't think
anything of that
uh... I wrote it both ways so you can get used to seeing it both ways
if we look back on our last slide
we know that we're going to need
this equation
but
we don't have something we're missing something
if we have our work function
and we need to find frequency
we need to have kinetic energy
we don't have kinetic energy right
well we do
what is the kinetic energy at the threshold frequency
at the threshold frequency remember you're putting just enough light to knock the
electron loose
but not enough light to actually give it any speed at all
so you're knocking it loose but there's no speed or no velocity
so your kinetic energy think back to your fundamentals
one-half mv squared
so if there's no velocity there's no kinetic energy
and so your kinetic energy is equal to zero
and so because of that
h nu minus the work function is equal to zero
well now we know h
and we know work
and we can just solve for nu
and so we end up with this
so this is sort of the trick
to making sure that you can find your threshold frequency
you have to remember
that at your threshold frequency
your kinetic energy is zero and that's because your velocity or your speed is
zero
there's not enough energy in that photon to actually give the electron
any speed
and so it's just going to knock it loose and it's not going to move anywhere
and that gives you your threshold frequency
now we can go ahead
and also figure out our kinetic energy
if we have this frequency of light
so these are sort of the two of the main ways I can ask this question
now we have this
and
we need to go ahead and find the kinetic energy
so we fill everything in we fill in our h
we fill in the frequency that was given
and we fill in our work function that was given
and we get this
so one more
now notice in this question we're taking it a little bit further
we're saying we have the work function for magnesium
we're calculating the minimum frequency of light required to eject the electrons
so that's the same thing we just did
then we're calculating the kinetic energy if we change the frequency of light
so again what we just did
now we're going to take it one step further though
and we're going to say well what about if we also want to know the velocity
so that's sort of the extra step that we're going to do here
so we're going to start
the exact same way that we started in the last problem
so we start from
our kinetic energy equation
and we remember that well at the threshold frequency
our kinetic energy is equal to zero
so we can set that equal to zero
which
now means that our new, our frequency
is going to be equal to w
over Planck's constant
so we can just fill those numbers in
so we have this
and Planck's constant
and we can get our number
and of course you can write it in hertz or you can write it in one over seconds
or you can write it in second inverse
whichever way you want to do it
and you'll see your joules cancel so that makes sense
so that's our threshold frequency
that answers the first part
or in other words
to eject the electrons, our minimum frequency, our minimum energy, our longest
wavelength
now
we can go through and we can do the second part
what if now we're given a frequency of light of that
what is our kinetic energy
and
also our velocity, or our frequency
so we go back
to this equation again
I'll draw a little line here so we know that we're starting a separate
section
and once again we're just filling everything in
so we fill in Planck's constant
and we fill in our frequency
and we subtract out our work function
now
that gives us our kinetic energy
so we fill that into a calculator
and we solve
we get our kinetic energy
but I also then asked you for one more thing
I said
what's the velocity
so now
we can't quite end here so
this is kinetic energy
now we need to find the velocity
so in order to find the velocity we have to remember
what our equation for kinetic energy is
that we've used before
so right now we've been using this equation
because that's what works for this particular system
but there's also the very general form of kinetic energy
and that
is one-half mv squared
and so we can go through and we can say well
now what is our velocity
keeping in mind that it's an electron
so if we know our kinetic energy
and we know that that's equal to one-half
now what is m here
well m is our mass of an electron
so that's something that we would look up
on an exam I would give it to you
and then we would have v squared
now notice this is one of those places that we get into the idea of we have
both frequency and nu
and they're in one equation so make sure not to mess them up
this was nu
for the threshold frequency
this was nu for this frequency
and this is v for velocity
so now we go through and we solve this
and we get our velocity
so that's sort of the other way that you'll be asked to do this
on a relatively regular basis
and of course the backwards directions of all of those is fair game as well
I can always give you the frequency and ask you for the kinetic energy
and then ask you to use that kinetic energy
to solve for the frequency of light that was actually given
now this comes up in your book
and so I wanted to have you guys look at it
a little bit and it comes up in your homework and I think it's good to
always look at these graphically and see what's happening too
so in this graph we have three different metals
and you can notice something about this it's linear right
as you increase the frequency
you increase the kinetic energy
and you do that linearly
now it's linear up until a certain point
or I should say after a certain point
before that it's just zero
so when you look at this in your book and you're asked questions on it
you can see that this is just zero until you hit this threshold frequency
and at that point
it's a linear relationship
now what is that linear relationship?
well we can look at the equation to show us that
if we have this equation
we can kind of look at it as y equals mx plus b right
so if we look at this as y equals mx plus b
where this is our x
what is our m?
well our m would be h
so our slope here is h
and so that's one of the places where you can sort of derive h out of
and you can say okay well h is a constant
that is going to be given to me but it does come from somewhere
and this is one of the places where you're going to be able to see it kind of show up
and you can actually graph it and you could find the answer
so you're asked to do that at some point where you have to fill in a graph and
you're given
the incident wavelengths and you're given the frequencies and you're given the
kinetic energies and you have to graph it and then you solve for the slope and
then that's what gives you h
so that's what that's kind of gets us through
the particle aspect of this
so
keep this in mind as you're doing your homework that that this is a good graph
to have in your mind
it's going to increase as you increase the metals
and that sort of wraps up
the photoelectric effect and the sort of particle aspects of this
next time
we'll go into more of the wave interference and more of the ways that we
can look at this and say
okay well light might act like a particle here
but it's definitely a wave too
and so there's experiments just like the photoelectric effect
that will go ahead and show us that