Power quality: Automatic testing

OMICRONenergy
9 followers
Oct 21, 2023
In modern power systems, measuring power quality has become increasingly important. Power quality measurement devices need to be periodically calibrated to ensure their continued accuracy. The CMC is capable of simulating various power quality phenomena, such as power system frequency changes, flicker, sags and swells, transients, voltage imbalance, harmonics and interharmonics.
Get more information: http://www.omicron.at/
In modern power systems, measuring power quality has become increasingly important.
Distributed power generation with wind turbines or small hydropower plants,
industrial sites with variable frequency drives,
and the presence on the system of modern electronic equipment such as computers
can all affect the quality of the power supply.
This is compounded with ever more complex energy networks.
Standards have been defined which force utilities to provide evidence that defined limits are met.
This has become a form of quality assurance for the energy that they supply.
At the same time, customers have to demonstrate that their equipment does not cause them
to exceed the permissible power quality limits defined in their electricity supply contract.
As a result, power quality systems are now widely deployed in electricity utilities and in industry.
This includes equipment for permanent installation,
continuously supervising power quality at important network nodes,
or portable equipment which is used when problems are suspected.
These power quality measurement devices need to be periodically calibrated
to ensure their continued accuracy.
In the relevant standards, such as IEC 61430, power quality is defined by the following criteria.
The voltage amplitude, with defined limits for upper and lower values.
The voltage waveform, with defined permitted levels for harmonics, interharmonics, transients and flicker events.
The voltage symmetry, which is defined by the balance between the three voltages in a three-phase system.
The power system frequency, and finally, the availability of the power.
The CMC is capable of simulating various power quality phenomena,
such as power system frequency changes, flicker, sags and swells, transients, voltage imbalance, harmonics and interharmonics.
The user can generate a test plan with a combination of all these power quality events,
which is then automatically run by the CMC.
Due to its accuracy, the CMC256PLUS is suitable for testing Class A power quality devices.
Manufacturers of power quality devices can use the CMC256PLUS in the development and quality assurance of their products.
