Tra dầu cho xích xe đạp thể thao quá nhiều có tốt không? [XEDAPXANH]

The chain is one of the basic components on a bicycle. It is the power connection of the rider between the front tire and the lift and then creates the force for the vehicle to be able to move. Many people think that putting a lot of oil on the chain will be better for the chain and the movement process. But is this true? Let's find out with the green bike! Apply a lot of oil to the sport bike chain, don't be lazy, do it the right way. Because if you apply too much oil to the chain, it will lead to your whip chain sticking too much oil. Sometimes it will make your shirt or arm dirty when you accidentally touch it. In addition, if you apply too much oil and too often, for example, every day, it will make your whip chain have a better chance of sticking more dirt. If you don't clean the whip chain but keep applying oil like that, then one day your whip chain will also rust. Remember one rule, there is a certain cycle maintenance process. Don't be lazy, otherwise you will regret it. When should I apply oil to my chain? Taking care of your old chain and your riding conditions. You seem to be unable to say an old-fashioned way. Wet or dry conditions require better care than outside humidity. Cutting and dusting also makes it pink. For this reason, we advise you to clean the chain after each trip, whatever is suitable for your chain. An accurate choice of oil for the chain is at a certain level of the individual. One thing is certain is that types of oil such as VKD40 or Woolnock Zuball Spray are not recommended because they clean the grease from the house. Applying oil from between the chain and the wheel. Choosing as well as applying the highest level of oil can depend on the conditions. But a natural rule with high humidity conditions requires the highest degree of oil. Choosing the right oil to apply as well as applying the right level of oil as a natural condition with a high humidity that sticks to the chain longer helps replace the water. In dry conditions, oil with the lowest degree of oil will attract less dust. If you maintain your chain regularly with standard oil, it is always a better choice. How do I apply the oil to the chain correctly? Step 1. Clean the chain. When you apply new oil to the chain, you need to remove dust. Use a piece of cloth or tool to clean the chain so that you can clean the chain completely along with the wheel. Note that never use detergent with two detergents because these things will clean the grease from the links between the chain and this thing. It seems impossible to apply later. Especially, strong detergents seem to speed up the process of making a chain ring faster. Step 2. Apply oil to the chain. Now you have cleaned the chain as well as the disc. You need to provide it with a new lubricant. Do not apply oil on the chain chain but on the side that is in direct contact with the gears. You should rotate the disc for a few minutes to move the chain. The eyes of the chain are capable of absorbing all kinds of residual oil. The more oil the chain contains, the more flexible it is. This seems a bit wrong. In fact, if there is too much oil, it will attract quite a lot of dust and increase the density of the chain. Therefore, after applying the residual oil, wait for 5 minutes to apply the oil to the chain. Repeat the process several times and then use a dry cloth to clean up all the residue. These are the sharings that Green Bicycle has summarized. Thank you for listening. Remember to subscribe to receive the latest video notifications. See you again at 12 o'clock every week.