Be Lab review MÁY HÚT BỤI MINI

Hello everyone, welcome back to BELAF REVIEW Today I have a toy called Mini Dust Sucker I hope after unboxing and playing this toy I can help you understand how to use the Dust Sucker at home How to build it and how to operate it Let's unbox it This toy is wrapped more than usual It's just a piece of paper We also have a zipper bag As usual, we have a user manual This manual is in Chinese These are the parts of the Mini Dust Sucker Very simple, nothing special The most important thing is a motor This is a motor A battery holder Battery holder Fan A round piece of wire Two-sided tape A rubber band Oh, there is a screw A rubber band to attach the motor Three pieces of wood A piece of ice-cream stick And two thick pieces of wood This machine has a simple structure There are not many steps to assemble Just look at the picture, we can imagine how to assemble it However, we need to prepare a plastic bag We need to prepare a plastic bag to play Now I will start assembling This is the Mini Dust Sucker after assembling However, when assembling this toy, you need to pay attention to the following First, on these pieces of wood They don't mark the length of the wire So it's a bit difficult to adjust between the plastic bag, the motor and the battery holder If we leave this stick too short The plastic bag may touch the fan and can't rotate They give me a piece of wood However, this piece of wood is not tall enough If I stick this white cover of the motor And leave this piece of wood The fan will not be able to rotate It will touch this ice-cream stick This is a drawback of this product This piece of wood should be taller This is the piece of paper that I had to cut from the base of this machine And one more thing is this bottle When cutting this bottle, I only cut about this much For example, if I cut this long, I will have to stick the tape here At that time, my dust sucker will weaken This fan will rotate at a certain speed The closer the wire is to the fan, the more effective my dust sucker will be Normal dust suckers in the house will have basic structures like this First is the suction tube This is the suction tube This is the dust filter The dust in this bottle This filter keeps the dust away And the clean air will come out When rotating the fan It will create a fan that moves the air from the right to the left This is the power supply There is a switch here, when we turn it down This motor will rotate However, I don't like this switch Because this switch is made of metal If it had a rubber or plastic handle I think it would be safer in real life This is what I don't like about this motor In the bag, they have given the origin to attach this piece of wood to this piece of wood They have made a hole in this piece of wood Very careful And this piece of tape However, I think this double-sided tape is very loose So I used glue to attach this machine to make it firm And it will last longer Now let's try to install the battery and try to suck it I have prepared 2 AA batteries Now I will check if this motor is rotating And secondly, I will check if the fan is rotating in the right direction When this motor is rotating, the wind must go in this direction If it goes in this direction, I will have to turn it upside down Let's try I will cut some pieces of paper and try to suck to see if my mini vacuum cleaner works I intentionally set it in this color to see if the suction power of this mini vacuum cleaner is strong enough to suck large pieces like this Fan speed And you can hear the sound of this motor I will put it back to the mixer There Pretty strong Let's try to suck it We will put it in this way There The pieces of paper start to be sucked in Because the color is too small, it will spread out later If the pieces of paper are too small, it will leak through these holes It's not that our mini vacuum cleaner can't suck it When you cut the paper for your mini vacuum cleaner Make sure the paper is big enough so that the paper does not leak through this hole The hole of this net In my opinion, this is a mini vacuum cleaner with a simulated structure Almost all basic parts of a vacuum cleaner that we are using at home In fact, there are also parts like this Suction pipes Motor Fan Filter Power supply The machine works quite well I bought this mini vacuum cleaner for 65,000 VND including shipping In my opinion, it is a bit expensive If it is about 45,000 VND, it will be more reasonable Parents can consider before buying for their children