3 Bước Tự Vệ Sinh Máy Tính Tại Nhà Cự Kỳ Đơn Giản / Ai Củng Thể Làm

Dr Duyên Official
3 followers
13 Video Views·Oct 16, 2023
Hello to all of you, I am very happy to see all of you in the theme of where to go and what to do.
So today we will return to the topic of computers and we will go in 3 steps
to clean a long-term computer dust.
So please watch today's video.
And back to today's topic, that is why we have to clean long-term computers.
Please pay attention to the dust like this.
This is just the part on the body, it does not affect the computer.
But if we use it for a long time, the dust like this,
this is the side of the cover, its cover is very dirty, a lot of dust.
Especially there are fans that suck up a lot of dust in here.
This fan is used to dissipate heat for the fan below.
If the dust is a lot, the amount of dust will block the wind and not dissipate the heat of the fan.
It can also cause some problems, such as running a little bit, or these screen cards.
There is also a lot of dust.
Most of you take the computer out to clean.
In this topic, you can do it yourself.
If you use the machine, you can do it yourself.
How to clean the machine and three steps?
The first step is to blow the dust for the machine.
Then we will remove all the components and clean them with a brush or a brush.
The third step is to dissipate heat and reassemble the machine and test.
There are only three simple steps.
The first step is to blow the dust for the machine.
Then we will remove all the components and clean them with a brush or a brush.
The second step is to blow the dust for the machine.
Then we will disassemble the machine and test.
There are only three simple steps.
The first step is to blow the dust for the machine.
Then we will remove all the components and clean them with a brush or a brush.
How to clean the machine?
There are only three simple steps.
The first step is to blow the dust for the machine.
Then we will remove all the components and clean them with a brush or a brush.
The second step is to blow the dust for the machine.
Then we will disassemble the machine and test.
There are only three simple steps.
The first step is to blow the dust for the machine.
It's not more complicated, but it's a lot more complicated.
I often call for you to wash these things to fix it.
When installed, it's just as beautiful, but it's very difficult to fix.
Because it has a lot of details, and when it's installed, it's a lot of work.
And the fixing process is not included in the installation process.
Now, let's go straight to the computer.
And we can do it at home.
We have cleaned about 60-70% of the dust.
Now we will remove these parts and turn them over again.
Then we will glue them to the CPU area.
It's very simple.
This cleaning case is very simple.
I will continue to provide you with simple and easy-to-use topics.
In the process of using the computer, you can fix or do basic things like this.
Anyone can do this.
As long as we are careful and do it step by step.
There are many cases when we turn on the machine from the toilet and then the machine cannot start.
Even if you turn it on, it doesn't work.
During the cleaning process, remember to turn on the machine carefully.
Do not touch the electronic components.
Now we will go to the last step.
That is to sweep the dust.
The important thing is that the dust in the heat dissipation area and the heat dissipation area is finished.
The last part will be quick.
The important thing is the place below.
After a few years of use, the place where the machine is clean and no dust is fine.
There are still a lot of dust.
This topic I will not do.
But when I took it out and made the machine run smoothly, I saw a lot of dust.
And when I have time, I will do this topic to send to my brothers.
As well as to meet my brothers.
The first time I saw it, it was very good for my brothers.
I saw a lot of dust.
As for the heat dissipation, if you need to dissipate heat, contact me.
If you are in Quang Binh area, come to my place.
I will help you get a machine.
If you buy a machine like this, it will cost a lot.
Come here and I will give it to you.
There will be a pile like this below.
There are a lot of dust.
If there is too much dust, it will clog the area here.
And if you pull this place dry, it will heat up very quickly.
And the capacity of this fan, blowing into it is not very effective.
After cleaning, wash the old glue.
I will take a piece of plastic, crack it and clean it.
That is the new glue.
I will clean the old glue.
I will not put together.
Even on this fan, if you feel that the dust is dry.
do not use it for a long time.
