Day 2 atomic structure, attractive and repulsive interatomic forces and energies
Oct 15, 2023
0:00 example question on wavelength to energy
3:26 wave mechanical model, quantum numbers, electron occupancy rules
19:00 electron configuration
23:09 oxidation states, electronegativity
30:00 why do bonds form?
35:30 interatomic forces
44:30 potential energy well for interatomic bonding
Okay, welcome to class. We'll go ahead and get started. We left off last time with an
example of what a clicker activity might look like. So we're going to go ahead and finish
this one. I didn't bring my calculator today, so I'm going to rely on you guys for some
of the calculations. But even though it's simple and you should have seen this in chemistry,
we're going to review it one more time on how you convert between different things like
energies, right? So in this question, I told you that a green laser pointer has a wavelength
of 525 nanometers, right? So then I say, what energy will each one of these photons that
comes out of that green laser have? The equation was pretty simple. It was just this E equals
HC over lambda, right? E equals HC over lambda. We're going to solve for E, our energy, by
simply plugging in HC and lambda. However, you need to make sure that you have the same
units to make this work out. So there's a bunch of different ways we can do this. We
can look up H and C, our Planck's constant, such that they have electron volts as opposed
to joules. The energy of an individual photon, since it's so small, it makes sense to use
a really small unit of energy, right? Just like you could measure weight in tons or in
grams or something. And if you're talking about something small, it makes sense to use
grams. We're going to do the same thing in energy. It makes sense to use a small unit
of energy, which is an electron volt, right? So we've given you H, Planck's constant, in
electron volts times seconds. And then we've given you C, the speed of light, in meters
per second. So you could go ahead and plug this in, and you'll get the answer in electron
volts if you make sure to remember to convert your 525 nanometers to meters, right? Because
speed of light is in meters. So if you haven't seen this before, you should remember that
these conversions are pretty straightforward. You have 525 nanometers. I think the easiest
way to do these is to make these little tables. You remember that, all right, in one meter,
there is how many nanometers? One times 10 to the nine meters or nanometers, right? Therefore,
when you multiply these out, this cancels, and you're left with just meters. If you don't
remember stuff like unit conversions, please, please, please find one of the TAs during
office hours and just say, hey, I know I'm supposed to know this. Can we just go over
this and convert between hard stuff? The TAs will teach you how to do it. It's really not
so bad, but you need to be able to do that relatively quickly on exams because there's
oftentimes unit conversions. So once you plug that in, I think we came up with, does anybody
have the number offhand? 2.36. I think that was right from last time. The seconds cancel
out. If you make sure to put that in in meters, then it cancels out, and you're left with
just electron volts. Had I given you Planck's constant in joules, which is another common
way to show it, Planck's constant, they'll give it in all sorts of different units, right?
Meters squared, kilogram per second. You can get joules out of that if you go to these
things. It'll actually show you a bunch of different ones. There's a table in the front
of your book on the inside cover, I think, that has a lot of these different units for
it, whether it's in joules, seconds, EVs, right? So make sure that you're using the
one that's just most convenient for you. On exams and tests, we don't have to worry about
this for a few weeks, but you have a note sheet, so you can write down whatever convenient
unit you want to have on there. Okay, so that was the first one. So let's shift gears, and
having now introduced the idea that energy levels exist, and we've even seen evidence
of them, right? We took light from the sun or from burning different metals, we saw these
things, these spectral lines, right? So we know that different atoms produce radiation
that comes off with different energies, because it shows up as different colors, right? The
next question is, how sharp are these lines, right? Do those come from a specific energy?
Is there just one energy? Meaning, is there one distance from the nucleus that they come
from? And in gen chem, when you learn about this, you probably learn that they do come
from just one specific energy. What do I mean by that? I mean that if you've got your atom
here, you've got your positive nucleus, and you've got your electrons out here, if you
were to plot a distribution of this, what I'm suggesting is that instead of having all
of your electrons that distance away from your nucleus, you actually have a distribution,
right? So they don't lie exactly at some radius from the distance, or some radius from
the nucleus. Instead, their average position is at that radius, but they actually are smeared
out just a little bit. There's some play there, okay? And the reason for that is because instead
of behaving exactly as a particle or exactly as a wave, we have wave-particle duality,
basically. You can't describe electrons if you don't treat them a little bit like a particle
and a little bit like a wave, right? This was turn-of-the-century stuff that we discovered
about quantum mechanics. So because of that, we have to introduce quantum numbers, right?
To have that wave aspect of how electrons behave, you have to introduce quantum numbers.
You've seen this stuff before in chemistry. In high school chemistry, you learned that
there's these four quantum numbers. At some point, you should have seen this, that there's
n, there's l, m sub l, and m sub s. So what do these things mean, and why do we care about them
in this class? We'll be brief with them. We're not going to spend a lot of time, but n is your
principal quantum number. What can n be? What were the values that were acceptable? Anybody
remember this from high school chemistry? Yeah, n can equal one, two, three integer numbers,
and you just keep on getting larger, right? So n is allowed to be, starting at one,
integer values that increase. It can't be negative numbers. It can't be fractions or
anything like that. All right, what can l be, or azimuthal quantum number, as it's called?
Yeah, it can be zero, one, two, all the way up to whatever n is minus one, right? So it can't
be the same. If your n is one, then what is your only allowable l? It can only be zero. If n is
two, now you can have l equals zero and one, right? All right, what about m sub l? What can m
sub l be? Anybody remember this one? Yeah, negative l. It can be negative l all the way up
to positive l. So if l equals two, then what can our values be? They can be negative two,
or m sub l can be negative two, negative one, zero, one, two. Again, maybe you learned about
this, and anybody ever wonder like why you're learning this? Does this mean anything to you?
I'll explain why we should care about this, how it's actually kind of useful for us. And then
finally, the spin quantum number m sub s, what can it be? Yeah, plus or minus one-half, meaning
your spin can either spin up a positive one-half or spin down a negative one-half, right? These
things are useful because they explain why our great big periodic table, which we know and love,
is the way it is, right? Why on earth does the periodic table have this weird shape to it,
right? It has to do with these quantum numbers and the allowable values that they can be. Here's
how I'm going to explain it, right? Let's start with n equals one. For our principal quantum number,
if n equals one, then we have different shells we call these. If n equals one, we call that the k
shell. I don't know where this came from, it's just the terminology sometimes used. So the k shell,
so what subshells are allowed in there? If n equals one, the first subshell, let's talk about l,
what can l be if n equals one? It can only be zero. If l equals zero, we call that the s
subshell, right? Now how many orbitals can exist in there? If l equals zero, how many values can
we have for m sub l? It's just one. If l equals zero, we can go from negative l to positive l,
that's just zero. We only have one value, right? So we have one orbital, and then how many electrons
can fit per orbital? You can fit two per orbital, right? Because you can go spin up and you can go
spin down, right? Therefore, in that entire shell, you have one orbital that can fit two. We can only
fit two in that entire s subshell, right? Fair enough? So let's make it a little bit harder.
Let's say the principal quantum number is now two. If n equals two, what can l be? Well, yeah,
l can be either zero or one. If it's zero, we still call that the s subshell, but now we introduce a
new one. If l equals one, we call that the p subshell, right? So zero is right there, one is
right there, right? This maybe is sounding familiar in the periodic table, right? We have
the p orbitals, we called these over here, these were called the d orbitals. This is where that
comes from, right? So you've got your s and your p. Now, s, just like before, it can fit one orbital,
two, right? Now, meanwhile, p, what can the, if p corresponds to an l value of l equals one,
what can m sub l be? Negative one, zero, positive one. So there's actually three orbitals there,
each one of those can hold two, so that's six. Therefore, in that entire n equals two shell,
how many electrons can we fit? A total of eight, right? This making sense? Do it on the next one.
Now, if n equals three, then l can equal zero, one, or two, which corresponds to s, p, d. Again,
we have one and three, just like before, but now how many orbitals will the d subshell have?
That corresponds to l equals two, so how many m sub ls can we have? Five, it's the same five
that we did right here, right? Those are the five orbitals, right? So there's five of those,
each one of these things can hold two, so two, six, ten, for a total of 18 in that shell,
right? And you could go on and on and so forth, right? The next one, we'll just show one more.
If l equals three, that corresponds to the f orbital, that can now hold seven orbitals,
sorry, the f subshell, seven orbitals and 14 electrons. If you do the math, that comes out
to a total of 32, same stuff as before, 32 electrons, right? This explains the periodic
table. How? Well, take a look at our first subshell, the 1s1, right? If your principal
quantum number is one, you can have two electrons, right? So you have one element where you have one
electron, that's hydrogen. You got another element, helium, where you have two, right?
Let's move to our next one. If n equals two, we're going to have a total of eight elements,
right? Here's the first two, one, two, three, four, five, six, seven, eight, right? So every
one of these different number of protons, electrons, if you have a different one,
that's your different elements, right? And so this is why the periodic table takes the
funny shape that it has, okay? Why do we learn about them? We'll show you in just a moment.
First off, because we care about how these electrons fill their available states. What
do I mean by that? So it's one thing to say, great, you've got oxygen, right? It's got,
what, eight electrons. It's got eight electrons. But what happens when you form
oxygen two minus ions, right? Like in H2O, in H2O, hydrogen has given up its electron.
It's given it to the oxygen. And two of those hydrogens have both given it to the oxygen. So
oxygen's picked up two electrons. So it's useful for us to think about where do those electrons go,
right? It now has more than it usually has. It's become an ion. It has a charge. So it has to
occupy these available states. And that becomes really important when we think about bonding.
And that's a very simple example. So let's do some harder ones. Let's think about the D subshell,
right? These ones are in the D subshell. So from elements 21 to 30, for example, that's the 3D
shell, right? There's 10 of those because we decided that there were 10, right? 10 different
electrons we could put in that shell. So if you're something like iron versus manganese,
are you going to behave the same? You won't because your outermost electrons, the ones that
are involved in bonding, they have different energies that they face. And we learn that from
how these electrons occupy. So I want you to turn to a neighbor. And if you remember this from high
school, jog your neighbor's memory on how do these electrons like to fill the available orbitals,
right? If you're going to take an electron away or add electrons, how do they like to fill it?
And are there rules that they must follow? As a hint, you might remember this is called
Hund's rules, right? Okay. So turn to your neighbor and chat for a minute. Okay. Somebody
help me remember. What are some of our rules? Anybody remember anything that they feel brave
to talk about? Takara, what do you remember? Okay. What is the Pauli exclusion principle?
That is absolutely one of them. Yeah. Basically, let's say we're talking about this 1s orbital,
this one down here, the lowest one you're going to fill. Pauli exclusion principle basically tells
us that if we start putting electrons places, change color, you can't put a positive spin
and a positive spin together, right? That is not allowed. You definitely can't do that.
That would violate Pauli exclusion principle. Pauli exclusion principle says instead what you
can do is you can put one spin up, one spin down, and you can now no longer have any more electrons
in that orbital. And where this comes into really importance is if this is an individual atom,
let's say this is one helium atom, right? This is helium. It's got two electrons. That's a helium,
right? If you bring another helium atom in close contact to this, something we're going to talk
about later today, now you've got the potential for four electrons all occupying something very
nearly at the same energy level. That would violate Pauli exclusion principle, right?
So because of that, something has to happen. And what happens, we're going to cover later this
semester, there has to be basically a splitting and that leads to all sorts of really cool
properties. Okay. What else? Anybody remember other things? Is it Hayden? Yeah. So let's talk
about oxygen again, right? Oxygen has eight electrons. So we've got one, two, three, four.
We're going to go five, six, seven, and then we go eight, right? That's the example you're saying.
So think of it like electrons are exactly like people on a bus. People on a bus, if you get on
the bus and you're the first person on the bus, you sit wherever you want, you don't care, right?
But if you keep on putting people on that bus, the second person, if they choose to sit next to you
on the bus and you don't know them, it's weird, right? And electrons are weird like that. They're
socially awkward. They like to spread out, right? So they're never going to pair up if they don't
have to. If it's all the same energy level, if it's the same distance for them to walk to this
seat versus that, but I'm going to sit uncomfortably close to somebody, they don't do it, right? They're
just like people. So basically you would never have this happen. Does that have eight electrons?
Yeah, it does. But that is basically pairing up when you don't have to. Why don't they pair up?
Because there's what's called, there's a coupling energy. When you couple two things together,
there's a small energy penalty. And if they don't have to pay it, they won't do it, right?
So there's that. And then there's one more rule. Anybody remember one more rule for electrons and
how they fill orbitals? There's one more one that's often forgotten. Is it a Brennan?
Yep. They want empty orbitals or they want full orbitals or they want half filled.
All three of these are preferred. So let me ask you this. Here's our periodic table.
You've got manganese and you've got iron right next to each other. And you know,
they're not the most dissimilar things, right? But there's some key differences. Let me ask you
this. Which one wants to hang on to its electron more, manganese or iron? Turn to a neighbor and
talk about it. Let me pick on the back row. I'm going to pick on Jan in the white shirt.
That's you. Is it Jan or Jan? I don't know. I can't even hear you. Okay. So you think based
off of charge, right? That manganese has a smaller nucleus. And so it's got a smaller charge. And so
there's going to be some shielding effects. That's one way to think of it. That's not what
dominates though. Let me pick on, is it Aaliyah in the purple scarf? Go ahead. You think iron hangs
on more. How come? Okay. Similar argument to what Jan was saying actually. Anybody have a different
opinion? Is it Griffin? Yeah. Yeah. So it has more stable pairs or less stable pairs than iron does
so that it can more easily give away that valence electron than iron. Yeah. So if you think of the
D orbital, you've got, sorry, in the D shell, I get these mixed up. In the D shell, you've got
five orbitals that are all at the same energy level, right? So let's look at iron or manganese
for a minute. Manganese is one. I forget which one is which. Manganese has five. One, two, three,
four, five. So that is a half filled orbital. So it's happy to be there, right? Meanwhile, you've
got iron, which looks like that. So iron, if it gets rid of that one electron, it becomes half
filled, which it's pretty happy to be, right? Whereas manganese, if you take away one electron,
it goes from half filled, which it's happy with to not quite as happy. Now we're not talking about
big differences in energy, but we can see them. If we go back up to here, this was our ionization
energy. What are we talking about? We're talking about elements 25 and 26. So right here, 25 and
26. Take a look at that. Do you see how 25, right there? This is small, but we're talking about
this guy. That one, that didn't make it any better, right? That one, it doesn't want to get
rid of it. To strip away that outermost electron, which is to ionize something, costs a little bit
more energy than the one before, right? Because it's at a half filled state. So some of these
rules are easy to predict. Some of them are hard to predict, right? But this does give us an idea
for how electrons choose to fill different orbitals. Yeah, Hayden? We're getting to that.
We're getting to that. It's called the Aufbau principle, if anybody speaks German. It's construction,
right? So how do we write electron configurations? The very first question on the homework asks this.
All it's doing is it's having us write out where the electrons are in different orbitals. You could
draw diagrams like this, right? That's certainly accurate, but it's not very concise, you know? So
instead we have a way of writing it. The way that we write it is we write 1s, and then you write a
little 2 up here, because there's two electrons occupying that 1s orbital. Then you write 2s,
and there's two occupying there. And then in the p, how many p's are there? It's the 2p.
How many are in that p orbital for oxygen? Yeah, there's four, right? There's a total of four up
there. Let me get rid of that so as to not confuse people, right? So this is electron configuration.
Now to make this easier, so if you do something with only eight electrons, it's not so bad. If you
do something that's got a bazillion electrons, it's easier to do a trick where you look at the
periodic table, and if you're talking about, say, selenium, rather than writing out the full thing
for selenium, what you can do is you can say that selenium looks just like argon, which is the most
recent noble gas before it, plus some other stuff. So let's write out selenium, or what are we doing
here? Do chromium, right? Chromium looks just like argon, plus these ones. So chromium is going
to be argon. You write this in square brackets. So whatever argon is, plus it's going to be
1, 2, 3, 4s, 4s2, and then 3d, I think it's 3, 1, 2, 3, 4, right? Now I think it was Hayden.
Somebody mentioned, how do you know whether it does that or if it does something slightly
different? Is this also possible? Or you could do argon, 4s1, 3d5, right? Because think,
you're talking about little differences in energy. In this case, you have a full orbital, which is
your s orbital, and you have an almost half-filled. Meanwhile, over here, you've got a half-filled
and a half-filled. So it turns out, I'm pretty sure in this case that this one's slightly more
stable, right? It's actually slightly more stable to steal one of those 4s's and put it near 3d.
I don't expect you to know these things. We're talking about small differences in energy.
I'll let you know if it's something unusual like this. I'll have that available if it was on an
exam or something. Are there questions on writing electron configuration? Can I make that clearer
in any way? Yeah. Yeah, so let's write out the alpha principle. Alpha principle is a way of
figuring out which one of these things go into. You write it like this. You write 1s, 2s, 2p.
You write 3s, 3p, 3d, 4s, 4p, 4d, 4f, right? These are just the available states. And then how does
it fill them? This is sort of the trick that some people find useful. I don't know if it's terribly
useful, but they fill like this. They fill a diagonal. You're first going to fill the 1s.
When that's full, you now fill the 2s. And then you start to fill the 2p, and then you fill the
3s, right? Then you're going to fill the 3p and the 4s. Did I mess up? That's right. Yeah,
then you'll fill the 3d. Yeah, that's right. And 4p, and you could write the 5s and so forth,
right? So that's a trick for remembering how these things fill. I don't think it's terribly
important. What I'm actually going to hand out, which I've forgotten to do so far, we'll bring
it next class period, because we have a really nice periodic table that has the electron
configuration written out for all the elements. It doesn't have it for different ion states,
right? If your element adds or lose electrons, it doesn't have that. But it does have the elements,
and it has a ton of other really useful information like melting point, density,
crystal structure, all sorts of interesting stuff on it. So I'll bring that for next class.
Okay, why are we learning about this? We learn about it because it helps us predict how ions
bond together, and it teaches us something about what type of bond forms, right? So for example,
take iron 2+. Iron 2+, you start out with iron. It lost two electrons, right? If you looked at
the electron configuration for iron, you could take a pretty good guess at what two electrons
it's going to lose. Like if iron's right here, what do you guys think? Which two electrons will
it lose first? Remember, it's got six electrons, so it's right like this. So it's pretty much happy
to get rid of this guy, right? So it's going to lose that one, and then it has to choose whether
to get rid of this one or to lose one from its four best, right? Now, actually, I remember which
one of those, right? But this gives us a clue for what common oxidation states. So if something will
easily get rid of three ions and have now an empty shell, then it's common that that ion will form a
plus three ion. That make sense? But let's look at the periodic table. Vanadium. Vanadium, what would
you expect the common oxidation states to be for vanadium? Plus three by getting rid of these 3d
electrons, but it could also be plus four, and then you'd have to fill that. I think it probably
exists, but it's not common. But you can do plus five, right? A common valence of vanadium is
actually plus five, and that's the most common oxide you can buy it in. It's actually V2O5. So
two vanadiums, five oxygens. So this is really helpful for us to figure out what thing's going
to form when compounds, right? Now let's do titanium. What will be our common oxidation
states for titanium? Two plus and four plus, right? What about copper? What will copper be?
Minus two is a good guess. What if it were just like, what if it would become an anion and pick
up electrons as opposed to a cation? Remember, cation is a positively charged ion, anion is a
negatively charged one. So what if it could pick up two? I'm sure that there's actually compounds
of copper that form where it does add electrons. But yeah, it's actually usually plus two or plus
three, right? So if it loses three, one, two, three, that still doesn't get us there. So it
explains some really well and others, it doesn't explain super well, right? The two is probably
these four s electrons getting lost first. There's a little bit more to this because this is assuming
so far that all of your ions are at the exact same energy level. Something you'll learn about if you
take further courses in that deal with chemistry at all is that they're not always at the same
energy level. In fact, it depends on what your neighbors look like that surround you. So take
Mark here for a minute, can you raise your hand Mark? Mark here, how many nearest neighbors do you
have? You got left and right and front and back are pretty much the same, right? So because he
has that, what we call a coordination number of four, he's coordinated by four nearest neighbors,
that would lead to a different arrangement in terms of your energy levels here than if you
were surrounded by say three people or surrounded by two or six or eight, right? We'll talk about
this a little bit more later on, but it's more complicated than this because these are talking
about individual atoms that have no neighbors, right? And in just a few moments, we're going to
talk about when our first neighbors move in and what happens to atoms, okay? All right, there's
something called, well, I should mention really quick that you can have Fe2 plus and that forms
iron oxide, FeO, right? Because oxygen is two minus. How do we know that it's two minus? Well,
we look at our periodic table and oxygen can easily pick up one, two electrons and have
a structure that looks like neon, which it's going to be happy with, right? So it's obviously
going to be two minus and in almost all compounds, oxygen is two minus, right? So FeO is going to be
a one-to-one ratio because charge is balanced, right? You had positive two from the iron,
you had negative two from the oxygen, it's balanced. However, you can also make compounds
like Fe2O3. Fe2O3, now you've got a total of negative six from your oxygens, so you need to
come up with a positive six from your irons, right, to have this thing balanced. Therefore,
your iron is no longer plus two, it's plus three, right? And then even more interesting,
you can have mixed oxidation states like Fe3O4. You have to come up with a total of negative
eight from your oxygen, so you need a total of positive eight. But how do you get a positive eight
from three ions? What's eight divided by three? Not an integer, right? So instead, what you have
to have is you have to have two of them are three plus and one of them is two plus. That makes sense?
Then you've got three plus three is six plus two is eight. So you can have mixed valence in your
compounds and they can do even stranger things. But for now, this is just a pretty good way to
estimate what compound will form. So if I were to ask you on a test, if I said, what do you
anticipate would be the oxide formula of zirconium oxide? Turn to a neighbor and tell them what do
you think would be the formula for zirconium oxide? Okay, anybody have a thought? Zirconium
oxide, let me pick on... I'm trying to remember the name. Okay, I think it's Kristen in the blue
shirt. Kristen, what do you think? Zirconium oxide, what might be the formula? ZrO is one
possibility. Are there other possibilities that might be likely? ZrO2. And the most common one
is ZrO2, but you can also form ZrO. You can also form zirconium monoxide. So it's as simple as that,
right? Not so bad. All right, next up, let's talk about electronegativity. What does electronegativity
mean? Brennan? Yeah, it's a measure of how badly your atom or ion wants another electron, right?
And what's the general rule of thumb on the periodic table? Which of these atoms is
really wanting an electron? Fluorine. Fluorine wants an electron real bad. And once it gets it,
it's really happy and it doesn't want to be bothered, right? Meaning fluorine compounds,
fluorinated compounds, once they do form, they're pretty happy. They don't want to be messed with.
That's why things like Teflon, right, which we'll learn about later on, polyfluorotereoethyl,
what am I going to say? PTFE, polytetrafluoroethylene, polytetrafluoroethylene,
right? It's really, really inert. You can cook with it. Nothing sticks to it. It's really low
friction because once that fluorine gets its electron, it doesn't want to let go. It's happy
with it. Now, what things are happy to get rid of electrons? Down here, right? They're huge ions,
and this, they've got, what, francium's got 87 electrons. If it loses one, it's like,
right, it doesn't really care that much, whereas fluorine really wants to complete its shell. So
the general rule of thumb is that it increases in this direction on the periodic table, right?
Top right corner, top right corner are the most electronegative, bottom left are the least.
There's lots of exceptions to this rule, and you can see the exceptions when you look at
funny stuff that happens in your ionization energies, right? But that's the general rule.
Okay, let's talk about why do bonds form? What happens? You've got your oxygen. It's happy.
A single oxygen atom floating through the air, you know, that doesn't exist, right? Instead,
what does oxygen do in the air? It finds another oxygen, and they partner up. So why on earth does
this happen, right? Why do bonds form at all, whether it's oxygen bonded to oxygen or two
hydrogens bonded to oxygen to form water, right? Why do these bonds form? It can be best understood
if you think about this in terms of energy. So I've drawn here oxygen number one, right?
Meanwhile, over here, you've got oxygen number two, okay? And if you write them out in energy,
increasing energy, these filled up just like we did before. What can happen is if they come
together, and remember, when they get close together, you can't have all of these energy
levels occupying the same space, or you'd violate the Pauli Exclusion Principle, so that cannot
happen. So instead, what happens is you form bonds. You get bond orbital hybridization.
Can you remember this from chemistry? Instead of having like just a p orbital, you end up with like
sp, sp2, sp3. You get these weird things like that. So you get bonds forming, or you get band
splitting. Here, we're going to have a bond forming. This is how it looks. Instead of these
one, two, three, four, five, six orbitals sitting at the same energy level, you're now going to have
them split. You're going to have one, two, three, four, five, six, but you still have to fit all
your electrons just like before, right? So where are they going to choose to go? Let's place them
in there. We have to fit eight of these electrons there. So we're going to do one, two, three, four,
five, six. We're going to put six of our electrons at the lowest energy possible,
and then we're going to take the upper two, and we're going to put seven, eight, right?
Now, if you compare, this is the O2 diatomic molecule where two oxygens have just decided
to stick together. They have decided to stick together because this is lower energy than the
two scenarios that are separate, right? Because you went down in energy a little bit. By forming
what are called this sigma and pi orbitals, sometimes called the bonding orbitals, right?
These ones up here where it's sigma and pi, but with little asterisks, those are the anti-bonding
orbitals. If we have to, we can put electrons up here, but at best, it's going to be just as good
as them separate, right? And here where we only have eight electrons and we have space for 12
electrons, we actually get an energy bonus. We go down in energy, right? And going down in energy is
the reason why everything in this entire universe happens. Things want to lower their energy. If
they can lower their energy, then it happens. If they can't, then it won't happen. Rosa.
I did. Basically, ignore these guys for a moment, these guys. We're just talking about the 2p
orbitals. Each oxygen contributes four electrons from its 2p orbital, right? But we combine both
those orbitals together to create a new type of orbital. This is a bond, right? Those three and
three, we brought together in a new way where it's like this, like three above, three below sort of
thing. And by doing that, we can place them at a lower energy. It went down in energy. That's what
everything wants to do. If it can lower its energy, great. That's like if I tell you, I'm a
scout master. And if I take my scouts and I tell them, I can say, you can hike at four miles an
hour, or you can hike at one mile an hour. They're always going to choose one mile an hour because
they want to expend less energy, right? Atoms are no different. They want to be at the lowest energy
state possible, right? Any questions on this? This is a little bit tricky. Let me ask you this. Oh,
yeah. Question in the back. I can't see your face. I don't know who you are.
What does it say up here? That's a sigma, the Greek letter sigma. And then it's got a little
asterisk by it. The asterisk indicates that this is the same type of orbital, sigma here and sigma
down here, except one is what's called antibonding, meaning it doesn't get filled very often because
it's higher in energy, right? Vertical is our energy axis here. So those energy orbitals up
there don't get filled as often because they cost more energy to do so. Any questions on this?
All right, let me ask the next question then. Why doesn't, well, how about this? I just blew it.
I blew it. Why doesn't though, why doesn't helium form a diatomic molecule? The first question was,
does it form a diatomic or does it stay alone? And then why? Why don't you think helium forms
a diatomic molecule like oxygen? Let's draw its thing, right? Let's draw it. I think I can just
create some space here. Apologize if your notes don't have the space, right? Here's two different
helium atoms, helium number one, here's helium number two, and they each have two electrons in
their 1s orbital, right? So these things could potentially bond. If they did form a bond,
you would have, you'd have to split the energy levels. So you'd have one up here, one down here,
one, two, three, four. It's no different. It's the same, right? This is right in the middle.
So there's no energy benefit for these things to form a bond. So they just don't do it,
right? They could temporarily go together and it's not like it's costing them energy,
but it's not, there's no benefit, right? It actually would cost them energy. We'll talk
about why in just a moment, but there's no benefit here, right? Can we move on? Are there
any questions that I can answer about this? Okay, let's keep going. Bonds between things
that aren't of the same type, they behave similar ways. They have a driving force to come together,
right? If you think in terms of energy, they could go down in energy until a certain point.
But before we talk about energy, let's relate that to force because force and energy are related
through an integral and a derivative, right? This isn't so bad to do. So let's think about it in
terms of force first. Let's draw an axis. We're going to draw, our vertical axis is going to
represent the force and our X axis is going to represent the interatomic separation,
which we oftentimes just call R, right? The radius between two ions. Meanwhile, this is force
and we're going to make arbitrarily, we're going to choose this. We're going to say that a positive
force is attractive and negative forces, we'll call those repulsion. Okay, now I need two
beautiful people to volunteer. I have two beautiful volunteers. So in the back in the red shirt, come
on down. And then a girl, let's do Emily. Can I have you volunteer? You're going to make the TA do
this. So Emily, you'll stand over there. And is it Alex or Zach? I'm way off. All right. Oh,
Anthony Wardell. Okay, Anthony. Okay. You guys see each other and it's love at first sight.
They experienced some massive attraction and so they're drawn to one another. So go ahead,
draw into one another. No one's ever going to volunteer ever. And they stopped,
but you're massively attractive. Why did they stop? There's like a bubble, you know? There's
a bubble of social comfort, especially in front of 200 of your peers. I mean, maybe if I was
volunteer, you know, I'd like, nevermind. Right? There is a little bit of an awkwardness when you
get close. Maybe it's like, maybe Emily got close and she's like, that's kind of a patchy beard.
Not as patchy as Sparks's, but it's kind of patchy. And he's like, you know, I don't know
either. And so actually what happens if you get too close, you now start to experience a little
bit of repulsion. And now you've reached some equilibrium, like you guys haven't moved.
You have reached what is called the equilibrium distance. You haven't moved. Okay, thank you.
You can take a seat, right? Atoms are no different. Atoms, if they are the certain types,
meaning a positive and negative and cation and anion, they will experience an attractive force
to one another until a certain point. Now it's easy to explain why people may not want to get
super close because the whole awkward thing. Why don't atoms want to get too close? What do you
think? What's the repulsion force, Rob? What do you think? What about the nucleus?
That's an interesting guess. That's not exactly right. That's a great guess. Meaning like both
those atoms, even though one had a net negative charge and one had a net positive, they both deep
down in their very interior have positive nuclei. And maybe that's going to repulse. That's a great
guess. It's not exactly right. What do you think, Takara? Absolutely. Poly exclusion principle.
Remember, you've got these two different atoms. As you come closer and closer together,
if atoms with electrons at the same energy level start to occupy the same volume of space,
that violates an unviolable principle and the universe would end. So therefore,
instead of doing that, it starts to have to kick those electrons up to higher and higher energy
levels. Nothing likes to go up in energy. So therefore, it just doesn't happen. It experiences
a strong repulsive force. So let's draw these. The repulsive force, I'll draw it first because
it's hard to know what it would... Oh, something weird happening today. All right. So the repulsive
force, let's draw it in blue. It's going to look like this, right? Meaning as you get really,
really close together, it takes off, right? Once you get below a certain point, it really,
really takes off to infinity, right? It just gets stronger and stronger the closer you overlap these
two atoms. Now, what should the attractive force look like? Anybody have a thought? Should it be
what? Maybe turn to a neighbor. Anthony, what do you think? Yeah. Who's taken physics? Physics one.
You would have seen this, I think. Remind me what Coulomb's law tells us. Anybody remember
Coulomb's law? It's for charged particles, right? Is that physics two? All right. I'm sorry. Well,
Coulomb's law, anybody? Anybody? All right. Kevin. Force equals K, a constant, times Q1,
Q2 over what? Distance. Or is it distance squared? Distance squared. Just like that, right?
So this is the exact same thing. We're talking about ions of a different charge, so we're talking
about Coulombic attraction. Therefore, you should see something that should drop off as 1 over R
squared, right? So let's draw it. It's going to look something like this, okay? Therefore,
if you were to combine these two together, and this is where it gets tricky, what should it look
like? If you were to combine these two together, you've got your attractive force, your negative
force, what will it look like? A decaying sign. That's absolutely right. It looks like a damp
sine wave, right? It's going to increase at first because the repulsive force is really,
really strong, right? So at small values of R, repulsion dominates, but then eventually,
the attraction dominates. And at infinity, that goes to zero. Meaning if you take two atoms,
say a sodium plus, a chlorine minus, salt, sodium chloride is just salt, right? You take those two
ions and they're infinitely far apart, they experience no attraction to each other. It
goes to zero. There's no force of attraction or repulsion. They just don't see each other.
As you bring them closer and closer and closer, they initially start to feel an acceleration to
draw even closer together, right? And at some point, they're going to reach a maximum force,
right? At some separation distance, they feel a maximum force to be drawn together. And then
it's going to reach a zero force where there's nothing. And if you try and squish them together
after that, they start to experience a repulsion. This makes sense? How are we doing on time? Got
10 minutes. We're good. So because of this, we can start to now finally talk about things that
we care about in material science. And this is our first thing right here, that distance from there
to there, we call this the bond length. Sometimes also called the equilibrium separation distance,
right? It corresponds to the value when F equals zero. When you're F net, your net force,
right? When your net force is equal to zero, that's when you have your bond length, right?
If there's no force acting on it, it's not going to move anywhere. It's going to stay put, right?
I should label these. This is your attractive, which is the same as this guy, Coulomb's law.
And then this over here is repulsion, repulsive force, okay? Any questions on this? Can I clarify
it at all in any way? So it's useful to think about in terms of forces. Now we're going to
turn to energy, but real quick, Chakar. No, it's not the same because they have a different
R dependence. The attractive has a R dependence. It depends on R as a function of one over R
squared. This would be like R to a higher power. It's negative, but it's R to a higher power.
So meaning at small separation, repulsion dominates. That's why you never have atoms
collapsing into one another and nuclear fission occurring, right? You have to overcome this
repulsive force, which is enormous, right? Because a lot of Pauli exclusion principle happening,
okay? So when do you reach equilibrium? If I just told you F net equals zero, right? That's when
equilibrium occurs. All we have to do is find an expression for our forces, right? Set it equal to
zero, solve for R, and we would have our equilibrium separation, right? So again, F net
equals FA, F attractive, plus FR, our repulsive force. And when that equals zero, that is at
equilibrium, right? Like a hockey puck on ice, if nothing's touching it, it just stays put. But if
I'm pushing that hockey puck, it's just going to keep on moving as long as I'm pushing it,
right? And when you actually hit it with a stick, it slides, but it's still experiencing a force on
it, a coefficient of drag, right? From the ice and the air. So it has a drag force. And eventually
when that's set to zero, it'll stop too, right? Ice makes it go further than carpet, but it'll
still stop eventually. So now how is force related to energy? Anybody remember from physics,
how does force and energy relate one with another? Force and energy, how are they related?
Yes, FDR, like the president. Energy equals the integral of FDR, right? Or another way of writing
this is that force, sorry, that was a funky E, F equals the derivative of energy, DE, DR.
Both of these statements are true. So in the time that we have left, five minutes,
if you were going to draw this, let me try and draw on the same axis,
now we're going to draw energy and we're going to draw it against, just like before, R,
our interatomic separation distance. What should the energy picture look like? Well,
from this, anybody want to be bold and try this? Remember what you know about integrals and
derivatives, right? The derivative of a function, right? If your function is say F and no, sorry,
let's say E, because we're gonna take the derivative of E, right? So energy, if you take
the derivative of E with respect to R, what does that tell you about the function energy, right?
If it's negative, what does that tell you about the energy function? It's decreasing, right? If
it's positive, then it's increasing, right? And then you remember zeros correspond to maximum and
minimum, right? So if you look at this, our net energy, right here, it is, when it's at a zero,
that should be a maximum or a minimum of our energy. And just from what I've told you before
about energy wanting to be minimized, do you think when F net is zero, is that a maximum or a minimum
of energy? It's gonna be a minimum, right? The atoms don't want to move because they're already
in a happy place in terms of energy. They don't want, it's already as low as it can go, so they're
not going to move. So we know that at R naught, sorry, I should write that R naught is sometimes
called the equilibrium separation, R with a little naught underneath it, a little zero.
So that's our equilibrium bond distance. We know that we're going to have a minimum.
This is dropped right there, right? Now, how do we know what else to draw? Well, everywhere left
of this, left of R naught, what's happening in our force diagram? To the left of it, it's negative.
Therefore, it must be decreasing. Our function energy must be decreasing, right? So let's draw
it. Let's say it's going down to there. And then after that, it's going to be increasing the whole
way because this never goes negative again. So it's going to continue increasing, but it's going
to increase rapidly at first, and then it's going to have an inflection point that matches this
right there. If you guys remember this from calculus, it'll have an inflection point,
and then it's going to tail off. So it ends up looking something kind of like this.
This is the famous energy potential well, right? Looks kind of like a well, like a U.
The potential well. This, believe it or not, as simple as this concept is, is extremely useful
for describing a ton of the different phenomenon that we observe. This tells us things about
melting point. It tells us things about thermal expansion. It tells us things about binding energy,
right? All sorts of things. Anthony, question? So I think I have two questions there. First off,
what's the difference between energy and force? So they fundamentally have different units,
all right? If I have this thing here, and I want to push it across the table, I have to apply a
force of some number of newtons, and I have to push that for some distance, right? The longer I
push it, the more energy I expend, right? So the same force, if I do that for a longer time, I
expend more energy. So they're just fundamentally different that way. And then the other question I
think I heard from you is, what's the difference between potential and energy? And those are the
same thing. It's two words for the same thing. When we talk about a potential, it's really short
for saying a potential energy. Does that make sense? Any other questions on this? Can I explain
so far? So let me just say a couple more things. We're almost out of time. So let me just say that
you can get coefficient thermal expansions, stiffness, melting point, all these properties.
How would you get that? Let me ask you this. If you have two materials, let me draw another one,
a different material, and it did something like this, which one of these has a higher melting
point? Now, why do you think black? That's right. Why should black have a higher melting point?
Anthony, you have a thought? Yep. Yep. To get out of its energy well, or to think of it this way,
right? This is the equilibrium separation. When you melt something, you basically allow the atoms
not only to separate a little bit, but to separate completely to the point where they can flow around
and do what liquids do. So you separate them to infinity. And to overcome it, that means you have
to drag it all the way that way. That means you have to overcome that whole distance here in terms
of energy. So if something has a shallow potential energy well, then it has a low
melting point, right? To separate it infinitely far away, it didn't take very much energy.
And we'll pick up here next time.

