Day 1 Intro to Materials Science syllabus, structure of atom
Oct 15, 2023
0:37 mse labs
3:37 homework, midterm, and cheating philosophy
4:52 what is mse and why learn it? Tempered chocolate demo
14:04 structure of atoms
22:00 EDS, energy to wavelength calculations
If you're in MSE 2010, you have to take the lab.
I promise we'll make these worth your while.
They'll either be really interesting,
you'll learn a lot, it'll illustrate a concept that's
being taught in class, it should reinforce principles
we're learning about.
For example, when we talk about electrochemistry and corrosion,
we'll do a lab on batteries, or etching,
or something that uses these principles
and it should make it more solid.
It's also great technical writing practice, right?
So when you go out and work in industry,
you're going to have to write memos and reports
to your supervisors all the time.
This will give you practice on it.
We will have labs most weeks, with the exception
of fall break, weeks where there's
a midterm, things like that.
So almost every week, including this week.
So if you are a 2010 student and you sign up
for either the Tuesday or the Thursday lab,
show up this week because we're going to talk about safety.
We have to go over how to not injure ourselves in the lab,
as well as how to write a lab report.
What are we expecting?
We have some examples we'll go over.
And if you can bring a laptop, then I'll
even show you tips for actually writing these things up.
OK, homework.
When you went to college for the first time,
you talked to your counselor.
Hopefully, they told you for every hour of class,
you should plan on two to three hours of studying.
Hopefully, this isn't the first time
you're hearing something like that,
and you didn't take 20 credit hours or something.
You're definitely going to need that extra two to three hours
for every hour in class in this course.
So if you're a 2160 or 2170 class,
that means you have a three credit hour class.
You're going to be spending six to nine hours a week
on homework and study.
You'll definitely spend that, right?
Homeworks are challenging.
I have a philosophy that homework should be more
challenging than midterms.
Midterms should be, oh, OK, this isn't as bad
as what I've done on the homeworks.
I hope that's the response I get from you guys.
That said, all of my homework problems,
we'll do a few in the book that are just easy ones we'll do.
And then I'm going to give you problems
from previous year's exams.
The reason I do that is because nothing
was more frustrating to me as a student
if somebody had taken the class before
and they had notes from a friend or something.
That drove me nuts if I felt like I
had to be at a disadvantage or had
to seek out an unfair advantage over my friends.
I don't like that.
So because of that, don't bother finding old class notes.
They're on the homework.
Old test, I'll post all of the Emily Post example quizzes
and midterms from years past.
I'm fine with that.
I don't reuse any of my questions for exams.
I post them on homeworks.
So that said, you'll know exactly what
to expect on midterms because you'll see them on homeworks.
Let's see.
We can't do late homework.
Late work in general, we can't do in this class.
There's just too many students.
So you've got to keep up on it.
If you're feeling concerned at all about material,
I really want to encourage you.
I've listed phone numbers for most of my TAs.
They said you can text them.
So there's no excuses.
We've gone out of our way to try and make it as easy as possible
for you to get resources.
So don't get behind.
Do the reading.
Don't start the homework on Tuesday.
Start it on Thursday or Friday and get hope early.
We used to turn the homework back in class.
But there's FERPA rules about that
where I can't actually do that.
So what we're going to do now is the TAs
will have a big box with homework that's been graded.
And you can pick it up during any TA office hours.
And that's, I think, the only right way
we can do it and still comply with that rule.
That said, we're not going to grade every single question.
There's too many people in here to grade every question.
So we'll probably grade of the, if there's
like seven or eight questions on a homework,
we'll grade maybe a quarter of those for correctness.
And the other one's just for completion.
So if you get a homework back and it's 10 out of 10,
you still should look at the solutions which
will be posted because maybe we just
didn't grade that question that you actually got wrong
and you thought you got right.
So we'll post solutions.
So make sure you look at those.
And we're obviously happy to look at any grading errors.
But it needs to be within a reasonable amount of time.
At the end of the semester, if it
looks like someone's a C- student,
they're not going to pass, we don't want you freaking out
and trying to make us regrade all this stuff.
You have to do it within a week or two
of when we got it back to you.
So we're happy to regrade and see if we messed up somewhere.
But it's got to get back in a reasonable amount of time.
And if you're somebody that has like 10 names, which sometimes
happens, just circle the one where you want it alphabetized
by.
We do it by last name.
So if you have multiple last names,
circle the one you want us to put it in the bin with.
S, T, whatever it is.
Grading, I already talked about it.
Cheating will definitely not be tolerated.
Almost every semester I've taught this class,
I've had to deal with cheating in a big way.
It's not pleasant.
Last time, we had no cheating last year
that I had to deal with.
So don't do it.
It's an unpleasant experience for both of us.
So don't cheat.
We are getting very good at catching people that do.
I also don't allow early or late exams.
It just wouldn't be fair if 179 students in the class
take it on Friday, and then somebody else says,
for whatever reason, that they have
to take it on the Monday thereafter,
because they're going to have an advantage.
So what I do is the following.
If you have to be gone for a wedding or for whatever else,
there's all sorts of great reasons.
And if you're a university-excused absence,
these works for that as well.
If you have a sports team or something,
what we do is the following.
You can use your final exam score.
The final exam is going to be comprehensive anyways.
You can use that to substitute for one
of your missing midterms, up to one or as many
university-excused absence you have.
Or you can take an oral exam before or after, right?
That's the only way I think that we can
kind of be fair about it.
So that's the option.
I think that's a pretty fair way to do it.
So let's talk about who's in this class.
Like I said, it's three courses in one,
mostly mechanical engineers, about three-fourths
of you are mechanical engineers.
And the rest of us are civil engineers
or material scientists.
We have lots of TAs, so even though it's a big class,
you should be able to get help.
And let's finally get to the parts that we might care about,
which is what exactly are we going to learn?
Why is it that if you're a mechanical engineer,
your program is forcing you to take this class,
which is sometimes not always a beloved class
because it's challenging,
because I think it's going to be valuable for you.
We are going to learn about the key thing
that we'll come back to over and over and over again
is the study of relationships between structure,
processing, and properties of materials, right?
If you have a certain type of steel
that has a certain property, strength, for example,
and then you process that steel differently,
how will that influence strength?
Or what if you buy the steel from the manufacturer
as it is, and it says it has a certain strength,
but then you stick it under salt water for a month?
What will happen to it?
What if you heat it up
and you leave it at 1,000 degrees Celsius, right?
It's understanding how,
as you process things in different ways,
it modifies the structure.
When you modify the structure,
you change the properties, right?
That'll be the key tenet we come back to over and over.
We'll also talk about how do you know what material to use?
When do we make things out of aluminum versus steel
versus polymers versus composites, right?
We'll talk about that.
We'll describe how glasses are different
than crystalline materials.
We'll talk about what this means.
What's the role of defects?
If you have a material that's imperfect,
maybe it's got a pore,
a little crack inside of it or something,
or maybe a material that has a missing atom,
just a single atom out of place,
or replaced by another atom,
what does that do to our properties?
Is it something we need to care about or not?
We'll talk about sustainability.
Spend as much time as I'd like on that
because there's just so many days,
but we'll talk about what does it mean
to design materials sustainability,
with sustainability in mind,
something I'm pretty passionate about.
We'll talk about how you can predict materials properties
from a given composition.
If I gave you any material,
you could at least give me some ballpark predictions
of what sort of properties you can expect out of it.
And then lastly, we'll know how to talk about
whether a phase is stable
or if it's gonna be changing in its operating environment.
And if it does change,
what does that do to its properties, right?
So that said, material science inherently
is gonna study different classes of materials.
And there's lots of them out there, right?
You've got things like ceramics on the top left,
to polymers, you've got this woven carbon fiber here,
you've got metals, you've got a semiconductor material.
And so different people that teach this course
will classify them in different ways.
I don't make a big deal of it.
We'll just talk about some of the broad differences
between them.
Let's start with polymers.
Polymers we know are flexible, lightweight, easily processed.
We could list other reasons why we use them, right?
But they went from not existing, synthetic polymers anyways,
before about 100 years ago, didn't even exist, right?
Things like polypropylene, polyvinyl chloride,
stuff like that, PVC, didn't exist 100 years ago.
And now it's everywhere.
It's absolutely everywhere, right?
So we'll talk about those in a big way.
We'll talk about ceramics, what they're good for,
typically high hardness, high strength, high melting point.
They also have other advantages and disadvantages,
like they're brittle.
Anyone who's dropped a mug and had it shatter
knows how brittle they are.
We'll even talk a little bit about designing
around that brittleness and what a pain in the butt
it causes us.
Metals, great conductors of heat and electricity.
They're also ductile.
We can form them in ways that the other ones
wouldn't quite work as well to do so.
And they're pretty strong.
And then semiconductors, semiconductors make,
they sort of lie between ceramics and metals
and they make some amazing things possible.
Some of the devices that are really the coolest
cutting edge things coming out right now
are due to semiconductors.
And then even better, you can make semiconductors
out of plastic these days, which will just blow your minds
when we get to it, right?
And then composites or mixtures.
Of any of the two different material classes
we've talked about thus far, glass fibers in an epoxy,
a polymer epoxy, you got fiberglass, right?
So when you move to composites
and mix these things together,
you can get a really strong synergy
and get the best of both or you can get the worst of both,
right, depending on what your application is.
But what else is material science, right?
Is food, is chocolate, right?
So I have a demo we're gonna show
and you can watch the whole video but it's long
from Harvard's science of cooking course.
And chocolate, first off, what is chocolate?
What's in chocolate?
Any ideas?
Cocoa, which is a fat basically.
It's a type of fat.
There's cocoa butter, type of fat.
What else is in there?
Sugar, that's basically it.
You can put other stuff in it.
You can put jelly beans and lollipops
and whatever nonsense they put in them, right?
But it's mostly the cocoa and the sugar.
So what's interesting is that there's actually
six different forms or phases is the word we use,
phases of chocolate.
Phases are just a way of assembling things together, right?
If you took atoms and you made
like a nice square arrangement of them,
that would be a square lattice.
That'd be one type of phase.
If you put them together in like a hexagonal arrangement,
that'd be a different phase, right?
So we'll talk a lot more about phases later on.
But for now, just think of them as a way
that you can put matter together.
And it turns out chocolate
has six different ways of forming, right?
There's these four, right?
Shown in darker color here,
gamma, alpha, beta two and beta one, these ones.
And here's the melting point for those.
So they exist at a certain temperature.
Here's that shown schematically.
Here's temperature here.
And you've got these first four phases, right?
We've got our first four phases right there.
And it turns out those are unstable or very unstable,
meaning when you put the cocoa and the sugar together,
the fat and sugar together, because it's not stable,
eventually they're gonna split, right?
And only two of these phases are stable
and they're the higher temperature ones.
So what happens is when you make chocolate,
when you make a treat or something,
you actually have to heat treat it.
Just like you have a steel that gets heat treated
in different ways, you have to do the same thing.
We have an example of that.
So what I did, I'm gonna pull these out.
I made a bunch of different chocolates over the weekend
and I didn't heat treat them, right?
So let me turn on the camera and switch it.
There's my mustache.
There it is.
The great summer experiment.
All right, so if you don't heat treat it,
it looks like this.
Not great, right?
This is what's called untempered chocolate.
This came from this.
We're gonna have you guys try it.
So what's the difference?
Does it just look different?
So can I have a couple of volunteers,
like three volunteers and try this?
Come on down, Andrew.
And then, I don't know your name in the back,
in the yellow, the white shirt, in the glasses.
Yeah.
What's the name?
Geronimo.
Geronimo, come on down.
And then one more.
Is it Bao, here in the front row?
Bao.
Bao, come on up.
Okay, so first thing you'll notice,
well, just hold it in your hand for a minute.
The untempered versus the tempered.
Okay, so go ahead and grab one.
Meanwhile, again, those came from these.
Ghirardelli 68%, or 60% cocoa, or whatever it is, right?
The same exact thing.
All I did was melt this and cast it into my Lego mold.
So hold one of these.
You can eat it.
Okay, tell me what you think,
in terms of the feel, the texture, the meltiness.
Thoughts?
You gotta tell that this one is a suspension.
Okay, what do you think, Andrew?
This one's super crumbly.
It's really crumbly.
It's mealy, right?
Not only does it look funny,
it's got the white spots on it,
like that Lego man has leprosy, right?
It just doesn't, the texture isn't right.
Tell me about the snap.
Bao, does the other one have a snap?
This one is hard, but this is soft.
Yeah, it's got a great snap.
Look, maybe I can do this in the mic.
Oh, yeah, well, I kinda hit it.
But you get the point, right?
They snap, and they don't melt.
This thing, I can put it in my hand,
and it's not melting, right?
That one, are your fingers chocolatey from the other one?
It melts in your hands, actually, really easily.
So even things like food,
thanks, guys, you can take a seat.
And we have more examples
if people wanna try this afterwards, come drive around.
Even things like food are material science, right?
There's actually a big business in engineering food
to have the right texture or stability or whatever it is.
And you can see that if you don't do it,
like here's actually, we'll show a brief video here.
That's pretty neat.
Give it a moment to fire up.
If you don't do it, like tempered versus untempered,
you'll see this chocolate bloom.
And all that is, again, as cast,
they both look pretty the same.
But if you leave this out over even a couple of days,
things that are tempered will be fine,
except I got some water on them, forgive those spots.
Whereas things that were untempered just look really bad.
And they've got a slick time-lapse video.
Let's just watch one small section of this.
So this guy from Barcelona comes,
he's describing what's happening.
He says, you know, you have to, pause it,
you have to cool it down like you're casting it,
and then you have to heat it back up
so that you get that beta one phase,
because that's the stable one, right?
And then you can go ahead and cool it back down.
If you don't do that, you get untempered chocolate.
And then here's what's happening,
here's a time-lapse photo of what's actually happening.
The phase separates into the cocoa and the sugar.
It's kind of gross.
It's not going to hurt you, it's not like it's molding.
It looks like mold, it's not.
It's just not going to be,
it's not what you want to use as engineers, right?
Okay, so what's the takeaway?
Is that material science is actually all around us.
It's all around us, it permeates the things that we do.
And no matter what engineering discipline,
whether you're a chemical or electrical,
you're going to run up against materials limitations.
Oh, it'd be great to make this sort of new mountain bike
if only we had a material that was stiffer and stronger,
right, or had a better, whatever, stiffness ratio, right?
So let's talk about some of the things.
We've got about 15 minutes left today.
Let's dive into our first chapter, which is chapter two,
and we have learning objectives.
I'm going to try and make a point
to have learning objectives at the beginning of every class
to really identify what are the things
I expect you to take away with.
So our learning objectives for today
is first be able to describe why atoms
have electron orbitals and why each shell
needs to have a different number of electrons therein.
This should be a review from chemistry.
Number two is I want you to be able to calculate the energy
in terms of either an actual energy or a wavelength
for radiation emitted when you either absorb,
you know, between these different levels
of an electron's energy states.
And we'll apply this to something called EDS,
which is a really great tool we use in material science.
We will learn how to write out electron configurations.
And then finally, I don't have a lot of time today.
We'll probably start next time, but we
will relate interatomic forces, so the potential
between two different atoms, to things
we care about, like melting point, or strength,
or stiffness, right?
Thermal expansion, stuff like that that we care about.
And that's pretty neat.
So let's start with just a quick review of chemistry.
Call this chemistry and fast forward, right?
And the key things we need to take away from chemistry
are things that relate to structure and bonding, right?
So before we can do that, we really
need to ask basic questions about what makes up
our atoms and the elements around us, right?
For example, going way back to like 1909,
or actually before the turn of the century,
we had people just trying to figure out
what's even in these atoms, right?
They didn't know the concept of a nucleus
surrounded by electrons yet.
They certainly didn't know much about those things, right?
So one of the pioneers that did this was Thomson, right?
Thomson realized that if you took a cathode ray tube,
like an old TV had these.
Basically, you have a vacuum in here.
You've got a source of electrons.
You've got, you apply voltage on it.
It strips electrons down, and you have a little hole,
and those electrons go flying through here.
If that goes through a magnetic field, you can bend them, right?
So all of a sudden, they realized, like, oh,
this must be a charged particle, because we
can bend it when it flies through a magnetic field,
right?
Something they didn't know before.
They didn't realize that there was charge here.
So something.
They didn't know there was an electron yet,
but they knew that it had a charge to it,
and they could actually change its path
as they moved it through the electric field.
And then comes along Robert Millikan.
All these people were Nobel Prize winners.
Robert Millikan, he figured out what that charge was
and how he did it is clever.
He basically sprayed a little bit of oil, right?
He charged these little oil droplets
by sending them through a small field,
and he sent them through here so they would fall
through a little tiny hole.
And what he did, gravity's pushing that little droplet
down, but he applied an electric field in such a way
that it was forcing it up.
And he figured out, what voltage do
I need to make this particle neither fall nor go up,
to sort of suspend?
So he looked through a microscope
along the side of this thing, and he saw it staying still.
He recorded the voltage, recorded
the volume of this thing, and he was
able to calculate, with surprising accuracy,
the charge of an electron.
So these early pioneers did some amazing stuff.
And what I like most about them, what I take away from it,
is that some of these guys weren't even scientists.
Like Millikan, this guy here, he was a classicist.
He studied Greek and Latin.
He was at, where was it?
It was, I think, Yale or Princeton.
He was one of our very first pioneers in this area.
He's a classicist, and they needed someone
to cover their physics class.
And they said, can you do it?
And he's like, sure, sure.
He did this quote, I love it.
He said, I doubt if I have ever taught better
in my entire life than my first course of physics
back in 1889.
I was so intensely interested in keeping my knowledge
ahead of that of the class, that they may have caught
some of my interest and enthusiasm.
Can I say that I feel a little bit this way?
I have students like, I'm you plus a few years, right?
You guys come in with such enthusiasm,
I'm just trying to stay ahead of your questions sometimes.
So let me say that if you come with a question,
I don't know the answer to it, I won't BS you.
I'll say, let's talk about it next time,
when I've had a chance to read about it a little bit.
But I hope to share some of the enthusiasm
that I feel about this, because material science
is making just incredible, incredible innovations possible
every day.
And we'll highlight that with news and YouTube stories
and really cool things are happening
that dovetail with the lectures.
Okay, we had people that figured out,
hey, it turns out, all right, these electrons are there,
and there's positive charge.
If there's negative, there must be positive.
But it's not like the positive
is just sort of smeared everywhere.
It's actually one central spot.
They figured it out with the gold foil experiment.
You can read about that.
And finally, we got to people who figured out,
okay, we know that there's positive and negative.
We know that the middle has this really positive region,
the nucleus, and then there's electrons around.
But then they started realizing
that they don't just exist anywhere around it randomly.
They exist at discrete energy levels.
And how they figured that out is pretty similar
to what we did just looking at the sun just now.
They passed light from the sun,
or different sources of light,
through filters that split it,
just like a prism can split light.
They use things basically like that.
And they realized, when you burn different metals,
lithium, sodium, whatever,
you got different spectral lines,
meaning the light, even though it looks white to our eye,
that's because we're seeing it all together.
If you split that up,
it's actually a bunch of small, different colors.
So they realized, oh, you must have energy levels
that are, first off, discrete,
and they're different for every atom.
All these elements give off different spectral lines.
So it became a nice way to characterize things.
That's kind of what they did in the early days
before they had tools like EDS.
And then there was people that moved on
to sort of explain the physics of that.
We're not gonna get into the quantum mechanics
of how it works.
We're just gonna take it as a granted
that there exist energy levels, right?
Whether it's the 1s that can fit two electrons,
2s can fit two, Tp fits six, and so forth,
but that electrons can actually hop between these levels.
That's the principle that works behind EDS.
We'll get to it in a moment.
And moreover, we learned that they have different shapes.
Some of these electron orbitals are dumbbell-shaped.
Others kind of just look like the sun.
They just go around it.
And some of them get really weird.
The d electrons get weird,
and fs do even weirder stuff, right?
So these things have specific shapes,
and you don't need to know the specific shapes
for this class, but just realize
that there are different energy levels
and that these things have been solved for us.
Then they went on to figure out things
like ionization energies.
Ionization energy basically says,
okay, if you've got sodium, lithium, whatever it is,
and you put it in a vacuum, and you apply a voltage to it
and some counter-electrode outside the vacuum,
how much voltage does it take
before you start stripping off these electrons?
So it's a measure of how tightly it holds onto them.
And we can measure that, right?
So this ionization energy for different elements,
we realize that, hey, helium,
it holds onto its electron like crazy.
25 electron volts before you pull that electron off.
Meanwhile, lithium, lithium doesn't care at all.
Five electron volts,
and you've pulled off its first electron.
So we realize that something's happening here.
Some atoms really want their electrons.
Others are happy to get rid of them.
Not happy, but they don't really hang on very tight, right?
This has to do with ionization.
So all this led to something called the Rydberg formula.
Here's our first equation for the semester.
The Rydberg formula says one over the wavelength
is equal to R, our Rydberg constant,
times one over N1 squared
minus one over N2 squared, right?
So this basically says if you have an electron
that's hopping from one energy level to another,
N1 to N2, for example,
you can calculate the wavelength of light
that comes off of this.
Just like we saw up here with our spectral lines,
these colors correspond to a certain wavelength.
This is how you calculate that wavelength, right?
With the Rydberg formula, right?
You need the Rydberg constant, which is right here.
And then otherwise,
it seems pretty simple and straightforward.
What's the downside of this?
Any downsides with this?
Can we just use this willy-nilly?
It doesn't work for every atom.
It works for precisely hydrogen, right?
So if you're working with hydrogen, here's a great tool.
But everything else, you have to use a fudge factor.
You have to introduce modifying factors to R
because all these atoms
have slightly different energy levels.
So it was a great start,
but it's not something that we can use very regularly.
We need a better formula that tells us
the wavelength of light that comes off as energy,
as electrons hop around in different energy levels.
And here's how we do it.
The energy difference between two orbitals
will be equal to HC divided by lambda, right?
So the energy, that could be the energy difference
between, say, these two sites, between that right there.
That could be an energy, right?
If you want to figure out,
as an electron hops from this above site here
down to this one, here's our electron volt scale, right?
So we know that it goes from negative 1.51
down to negative 3.4.
We can figure out what's our change in energy.
Once we know that, you need H and C.
What are those?
Planck's constant, speed of light.
Stuff we know, right?
Just look those up.
They're constants.
And then you can solve for the wavelength, right?
So this is a really simple,
if you're taking physics, you've seen this before.
It's a basic expression.
And this is a great,
we're actually gonna, surprising, as simple as this is,
we'll come back to it several times.
It's actually pretty useful for other things.
That's our first equation
that you're actually gonna use in this class.
So if I say, for a given atom,
there's a transition that has to do with,
you know, something here to here.
Calculate the wavelength of light, right?
Or maybe I give you a color of light.
I say, hey, a green laser, it's giving off green light.
What would be the energy associated with that,
of that photon, right?
That photon of laser light that hits you in your eye.
What's the energy that that thing has, right?
We can calculate that.
Okay.
Now, I mentioned before that different atoms
have slightly different spectral patterns.
It's a good thing, too,
because this turns out to be a great way
to characterize different elements.
Here's how it works.
So Thomas is sitting on the front row.
Imagine that this was like, I don't know,
somewhere you wanted to be
other than a class on material science.
And you wanted to sit up front
because you're jazzed about it.
But then, Thomas gets unruly,
and we throw him out, right?
Other people are gonna see
there's an empty seat down here,
and they're gonna jump down, right?
And energy, we know that we don't destroy energy
or create it, it's just preserved, right?
Remember your name again behind me?
Elise.
If Elise realizes there's an empty seat,
and she jumps up and takes this seat,
there's a difference in energy
from where she used to be to where she is now.
So since energy has to be preserved,
she actually gives off a wavelength,
a photon with some characteristic energy.
And every atom is different.
So how this works is we take a machine
inside a scanning electron microscope,
something we'll talk a lot more about later this semester.
You bombard your material with high-energy electrons
that knock out these innermost electrons, right?
So Stafford takes off, Thomas takes off.
We make these things open,
and other electrons start to fall in,
and then we measure with a detector
what's the wavelength or the energy of light that comes off,
and then we just look up in a table
what that corresponds to.
So the spectrum looks like this.
I apologize it's small.
Basically what you see is this is intensity on the y-axis,
and this is just energy here.
And you see certain peaks, right?
You see a great big peak right here,
and that corresponds to one of the elements
that is really abundant in your material.
That one happens to be, I don't know, I can't read that.
But you generate spectra like this,
and it's really easy to calculate
what's the atomic percentage of all the atoms
that are present in this material.
So from a material science standpoint, this is great.
What if you're working on a material,
and your competitor comes out with something,
and it's just fantastic,
and you would love to reverse engineer it?
One of the very first things you'll do
is chop that thing up, throw it in your microscope,
and hit it with EDS to find out what elements are present.
Right, that's sort of step one in these things.
Once you know that,
you can then do additional characterization steps,
things like XRD, things,
we'll talk about this later in the semester,
to really get an idea of what that material is.
So even though all metals kind of look metal and shiny,
and they look pretty similar,
it gets really easy to tell
what people made different things out of.
So you'll see a homework problem on this.
This process where you do this
is called energy dispersive spectroscopy, EDS.
You'll also see people call it EDX or EDAX, right?
And you'll have an example of that on your first homework.
So again, remember, you can run into problems
with units here, because you have energy,
I'll write it out again.
You've got energy equal to HC over lambda, right?
So if you have this in electron volts as your energy,
you need to make sure that HC is in electron volts, right?
Well, it's gonna be electron volts
times some distance, say meters.
If it's electron volts times meters,
then your wavelength is gonna come out in meters, right?
So I have some useful conversions for you,
and maybe, let's do it right now.
Let's do our first example.
This would be an example of what a clicker question
might look like in class.
We only got four minutes left,
so we'll do this and then we'll wrap up.
But I might say, a green laser pointer
has a wavelength of 525 nanometers.
What energy does this photon have?
Okay, so turn to an able, let's dive into this one,
how you'd go about it.
Here you've got H and you've got C.
Okay, anybody got an answer for me?
In electron volts, anybody got an answer?
2.36, that's the correct answer, right?
We will pick up here next time,
we'll work through this again, the unit conversion,
because I find that that's a good thing to review.
Let me just say, if you wanna register your clicker now,
and you want somebody to just show you how it's done,
Steve in the back, again, raising his hand there,
is happy to do it.
And if you have any other questions about this class,
we can answer them now.
Okay, thanks so much for coming.

