Cắt may Áo Kiểu Chào Mừng Năm Mới _ Tết 2020 _ Kỹ Thuật May Hai Lúa Vẽ Tay áo

Kỹ Thuật May
14 người theo dõi
1 Lượt xem video·13 thg 10, 2023
Before I cut the sleeve, I will measure the front of the shirt to see how much it is.
It's 25.
Now I will measure the back of the shirt to see how much it is.
It's 27.
Add it up.
It's 2.
It's 5.
Add the front of the shirt to the back of the shirt.
It's 52.
Divide it by 2. It's 26.
26 minus 1 is 25.
This 25 is the length of the sleeve.
How much is the length of the sleeve?
The length of the sleeve is 30.
So the length of the sleeve is 30.
But it's also the length of the shirt.
Now I will take the length of the sleeve.
It's 30.
Add it up.
It's 32.
Why is it plus 2?
It's because when I put the sleeve in, one part is missing.
When I put the sleeve in, one part is missing.
That's why it's plus 2.
Now the armhole.
This person doesn't have an armhole.
For the time being, I guess this person's armhole is about 32.
I will measure it.
One part of the armhole is missing.
One part of the armhole.
Now this arm is the armhole.
So I add 1.
It's 17.
The armhole is 32, right?
1 part of 2 is 16, plus 1 is 17.
I mark it as 17.
I draw a line.
This is the product armhole line.
Then I draw another line about 1.5 cm.
Earlier, I added the front part and the back part.
Divide by 2, subtract 1.
It's equal to 25.
Can you see it?
25.
Now I will put the number 25 on the top of the sleeve.
I will draw a line.
Draw this line.
It will meet the line at the end.
Stop.
This is the limit of the armhole line.
I will divide this line into 3 equal parts.
3 equal parts.
The first 1.3 is that I hit down from 5 to 7.
The other 1.3 is that I hit up from 1.5 to 2.5.
From here to here, it's about 1.5.
It goes through or goes down.
Okay?
The armhole of this person is determined to be 28.
This is 28.
This is 14.
Can you see it?
Now I will connect this again.
Can you see it?
Now I will fold it again.
Can you see it?
Okay.
This will make it go down.
Make it go down by 1 cm.
This includes the sleeve.
Based on the picture, it has a sleeve of about 3.5 to 4.
Now I will make a sleeve of 3.5 cm.
Can you see it?
3.5 cm.
In places where there is a sleeve, there is a hole.
There is a hole.
First, I draw the product.
I draw the product.
I cut off the sleeve.
This is the sleeve.
Okay.
I cut off the sleeve.
Remember.
Remember later that I will make this sleeve.
Make this sleeve.
It's long.
It's 30 cm.
The upper edge.
The lower edge is 28 cm.
Can you see it?
There.
This does not include the button.
If it's a button, you have to add more.
How much do you want the button to be?
I add more.
Because it is stipulated that the product is 28 cm.
The sleeve is 28 cm.
Because I draw the product for everyone to see.
If there is a button here, I will add a button.
Okay?
Why do I cut off this sleeve?
Because I still have the button.
How much do you want the button to be?
I draw this.
It's a button.
How much do you want the button to be?
I draw this.
It's done.
I cut it off.
The sleeve is very stiff.
Now I reduce it.
Reduce the sleeve.
Can you see it?
How to reduce the sleeve?
The starting point is in the middle.
The first part is in the middle.
Take the starting point.
Take the starting point up to here.
The remaining two parts.
Take one part.
This part is divided into two parts.
Take one part.
Start from here.
I reduce it from here.
The biggest part is from 0.7 to 1.
Is it okay?
This is the front part.
I mark it.
I mark the front part.
Can you see it?
You can sew the rib.
This is not okay.
Because the rib is too short.
I have to cut it off.
Cut it off.
Cut it in half.
Measure from here to here.
15 divided by 2 is 7.5.
Take one part and add 7.5.
I cut this part off.
This part is divided into 8 or 7 parts.
Or 5 parts.
It depends.
Can you see it?
I cut this part off.
Then I cut the rib.
I sew the rib here.
It's done.
I put the rib in.
This is because I drew it wrong.
The rib has to be straight like this.
I put the rib in.
This is the way to do it.
It's ugly because you have to experience it.
