Day 13 metal crystal structures
Oct 13, 2023
0:00 Larsen-Miller parameter, accelerated testing
5:27 reading quiz
10:35 how crystal structures relate to previous content (phase diagrams)
12:00 lattices, unit cells, and periodicity
15:05 FCC structure
17:40 how FCC lattice parameter and ionic radii are related, example problem
23:40 number of atoms per FCC unit cell
27:15 corners and face atoms in FCC are crystallographically identical
28:03 atomic packing fraction
35:08 coordination number
39:05 BCC crystal structure, lattice parameter as a function ionic radii, atomic packing fraction, coordination
Okay. Welcome to class. Okay. While you're getting your clickers ready for the reading
quiz, I'm just going to go very briefly over the very last thing that we didn't get to
in last class. And that's basically, we talked about failure, we talked about crack growth,
we talked about static fatigue where the crack grows even though you don't think it's cycling,
we talked about thermal stresses. And at the very end, we talked about creep, which is,
okay, you apply a load and it actually starts to deform, but it takes a long time for it to
happen. The last thing that we didn't get to was how do we accelerate our problems,
right? Our failure problems. If, for example, the roof is going to, after 20 years, it's going to
bend and break. How could we accelerate that testing so that we could design around it,
right? So accelerated testing is a big deal. One way you can do it is you can do a stress rupture
curve because both heat and stress will typically speed up the process of failure. So stress rupture
curves look something like this, right? Here's the stress plot on the y-axis as a function of
rupture time, right? So at a given stress, whatever this is, say at this value right here,
you can plot that out and see where it intersects different temperatures,
right? Where temperature three must be your highest temperature because it lasts the shortest
amount of time. Temperature two lasts much longer, right? So you could generate these so-called
stress rupture curves for lots and lots of different temperatures, right? And that's one
way to do it. But a better way because what if your temperature is between, say, temperature two
and temperature three? A better way to do this is with something called the Larson-Miller parameter.
You've seen this on the homework, so let me just recap it. The Larson-Miller parameter is a type
of stress rupture curve where you're plotting the stress at which something's going to fail
as a function of the Larson-Miller parameter. The Larson-Miller parameter is typically something
like this. It's the temperature divided by a thousand. It doesn't have to be this exact form.
It usually looks something like this. Multiplied by a plus b natural log t. a and b are your
constants for your given material, right? Or class of materials. This is a bunch of different steel
alloys, right? t is time that it'll survive in hours. So let's do an example of this.
If you had this figure, this is showing you the stress versus Larson-Miller parameter for some
sort of iron alloy, right? If the question was as follows, what is the maximum stress in psi
for this iron chain if it's going to be used in a furnace for five years at 600 Celsius? The way
you go about solving this problem, and I've already worked it out for the sake of time today,
first you figure out how many hours are in five years, right? You convert that to hours,
and you've got now your time. Now that you have your time, you're going to plug this into your
Larson-Miller parameter equation, and that's given here along the x-axis, right? So we say,
okay, we know temperature is 600 Celsius, turn that into Kelvin, and now you can plug those into
your Larson-Miller parameter. So all I've done, yeah? In my class, if it's ever supposed to be
log base 10, I'll write log with a little subscript 10 next to it. So on the homework,
I don't recall what is written. Does it say log? Does it not say base 10?
The PDF problem. Does anybody have it here handy? I took that from a website I found,
that example, so I don't know what they intended it to be. Somebody have the homework here?
So let's just have you do log base 10. If they wrote out log, then let's assume it's log base 10.
I'll give you credit if you worked it out natural log. I'll give you credit if you did it either
way. But whenever I write a question, I'll make sure to try and put... First off, I almost never
use log base 10. I'll use natural log, okay? But if you worked out either way, we'll give you credit
because I know it's due on Wednesday. So your Larson-Miller parameter equation, when you plug
these things in, you're just going to plug them exactly into this equation that you saw here.
When you do so, you figure out that the Larson-Miller parameter for this alloy at that
temperature and that time comes out to be 38.7. So all you have to do is figure out where that
is on your plot. 38.7 is right here. You draw a line up, see where it intersects the line given
for that alloy and figure out what stress it would take for it to survive under those conditions.
So it's a convenient way to show lots and lots of accelerated lifetime testing on one plot. That's
why we use these Larson-Miller parameters. If you're going to buy an alloy from someone and
if they report anything about its lifetime and accelerated testing, it'll be a Larson-Miller
parameter type of thing that it'll show. Any questions on this before we move on?
This is the last thing we can get to. Yeah, Rosa? Yeah.
Is that the maximum? That means if you want it to survive five years at that temperature
and you leave it at that stress the whole time at five years, it's going to fail. Now,
what do we mean it's going to fail? Again, this should be plotted as a function of probability
of failure. That's probably like half the time it's going to fail. So to make it more accurate,
you'd want to show 1%, 25%, 50% failure rates, but that's not shown on these typically.
And obviously, because that's the point at which it fails, when you design around it,
you're going to design your applied stress to be lower than that still. If you don't want things
to fail, you want to design around failure. Okay, let's shift gears then. We're going to
talk about chapter three and a quick announcement. Last class, a bunch of people showed me that their
app wouldn't let them put answers in. Not a bunch, probably three or four people said that
they couldn't actually, there was no decimal place, or they couldn't type the number nine
for some reason. If you're having weird response where issues, first off, make sure that I give
you credit for being in class. Just let me know. If you send me an email after class, I'm always
happy to give you the points for that day. But more importantly, send me what your device was
that you're using it on, so I can forward that along to the people at Responseware and they can
get that fixed in the future. So if that happened to you. Okay, let's start with our reading quiz
for today. Okay, the first question is, what crystal structure is this? Is it A, FCC, B,
DCC, C, zinc-blend, or D, perovskite? Okay, get your answers in. Okay, we're going to wrap it up.
Panic. Okay. Okay, is it A, B, C, or D? Okay, definitely it's A. All right, let's do our next
one. The hexagonal close-packed, or HCP, structure and the face-centered cubic, FCC, structures
have the same atomic packing factor, true or false?
Okay, answers in. True or false? Okay, wrapping it up.
Okay, pretty split. We'll go over this one today. Because it was so split, I'll probably make it a
point on either one on that one. Okay, and then the last one, last reading quiz question is,
the coordination number for atoms and bodies in a cubic is 8, 6, 4, or 2?
Okay, answers in. We're wrapping it up. Okay. Okay, it is definitely A. All right,
so that said, what are we going to talk about today? We will finally be able to describe what
phases are. We've been calling them these Greek letters. We've been giving them names that have
come out. We haven't really said what they are, so today we're going to start to describe what
some of the simple ones are. There's actually, and this is something that we do research in
in my group, there are at least 10,000 unique different ways of forming crystal structures.
I'm sure there's more, but we have identified 10,000. We're not going to talk about 10,000
class. We'll talk about maybe five, maybe six. Just the most simple, most common ones.
We'll define what coordination number is. We'll introduce some of these basic ones, BCC, FCC,
HCP. Importantly, we're going to establish relationships between the size of the atoms
involved in the ions, and the size of the lattice that comes out of it. So bigger atoms,
bigger lattice, but can we be more quantitative about it? I'm going to define that twice,
apparently. We'll be able to calculate the theoretical density of compounds, as well as
the packing factor, linear density, and planar density. We'll be able to use the cation to anion
ratio to predict what type of structure forms. Basically, if you know that you have two atoms,
and you know the size of these two, if you take the ratio, that'll usually tell you what the
structure is. If we have time, we'll start talking about some basic ceramic structures,
and maybe we'll open it. What have we covered so far? We've talked about bonding. We've covered
chemical reactions, free energy. We've talked about phase diagrams. Let's go back to phase
diagrams for just one second to introduce concepts of structures. We know that this,
along this line over here, is pure iron on the far left. That's pure iron. We showed you with
the iron wire demo that something happens. It switches from one phase to another. You saw the
volume expansion. That's one proof of it. Here's another proof. If you look at the phase diagram,
look at this low-temperature phase, alpha. How much carbon can fit inside of it?
At maximum, the maximum solid solubility of carbon in pure iron is 0.022%, so a pretty small amount.
However, if you go to that higher-temperature phase, gamma, it can fit all the way up to 2.14
weight percent carbon in it. Even though you're still talking about a lattice of iron,
one of them can barely fit any carbon inside of it, and the other one can fit a ton of it inside
of it. If there's more going inside of it, the carbon is actually fitting interstitially. That
means in between. Remember, atoms can either substitute or fit interstitially. Imagine if
you guys are atoms in this room, and I have extra students, and we're trying to cram them in here.
We run out of seats. The next possible option is for me to start cramming them in between. Carbon
is a small atom, so it can fit in between people pretty well, but in one of them, it can fit over
10 times, like 100 times better. Why is that? We'll show you why by the end of the class today.
Before we show you some crystal structures, let's talk about what is the basis of crystal
structures. The basis is something called periodicity. Periodicity just means something
can be repeated over and over and over and over. If you have a lattice, a lattice is something
that's repeated over and over. This lattice here is repeated over and over. What I'd like you to
do is sketch it on your piece of paper, if you've got one at the neighbor. Sketch something that
looks like this, and then I want you to draw the smallest possible unit cell. A unit cell
is an object that can be repeated over and over to fill all space using only translation,
meaning you're not going to rotate it. You're going to move it over. Give that a shot. Try
and sketch it down on your paper. Where's our smallest unit cell? Anybody want to take a guess?
What is our smallest possible unit cell that can be repeated via just translation,
meaning sliding up and down, left and right? Somebody said a hexagon. Let's draw a hexagon
on here. Something like that, maybe. Can we translate that? Sure. You could shift it down
and over, and you could draw another one right there. That's one possibility. Is it the smallest?
Not the smallest. What do you think, Rob? Yeah, like a rhombus, like one of these.
Yeah, that is our smallest. What else would you see? Oh yeah, maybe draw it like that.
Yeah, same thing. Same difference, right? Are there any other guesses?
Oh yeah, in the way back. Yeah, barzin, right? Barzin suggests maybe a triangle.
That usually comes up. It's not a triangle, because to fill a triangle, you actually have to
rotate it to get that triangle. You'd have to rotate it by 180 degrees. A unit cell has to
fill all space. We could fill as big of a wallpaper as we wanted with that, with only
translation, meaning side to side, up and down, without rotations. Actually, we can rule this
one out, and this one's not the smallest. It's actually either one of those two. Okay, fair enough.
That's our unit cell, and this is with the atoms that are arranged like that. We could have
arranged it differently, right? You could have had a lattice that was like this. Imagine those
are all equal space. That's a better artist, right? Again, you could choose all sorts of lattices. You
could say, well, what about a lattice like this? You could do that, but that's not your smallest.
Your smallest is going to be this one. Okay, so that's your unit cell. We'll come back to unit
cells in a bit. Let's now talk about some extensions of that. The first one are in the metallic
structures. The metallic structures are the simplest type of structures. One of the reasons
that we like metallic structures first is because they tend to be non-directional, right? Remember
from when we talked about bonding, a metallic bond is one where as long as the electrons are around,
they sort of all share them. Sometimes they use the sea of electrons as the words that sometimes
people use to describe bonding and metals, right? Because of that, they don't need to have an
electron in a specific spot as long as it's somewhere around. What tends to happen is very
densely packed structures. The electrons are all around, so all the cations sort of collapse
together in a very close-packed structure. So let's draw our first one. Our first metal lattice
we're going to learn about is FCC, which stands for face-centered cubic. So we're going to start
by drawing a cube, right? So you've got your cube. Now the first step to drawing an FCC lattice is
to recognize that the atoms are going to be on the corners first, right? So we've got our corners
occupied by atoms. And then, like the name suggests, we also have face centering. So along
all the faces of this, if this was like a dice along all six sides of the dice, you're going to
put an atom right on the face, right? So you've got an atom right there, there, the front, the back,
left, the bottom, all six of those sides. This is the face-centered cubic. So again, atoms are on
the face centers and on the cube corners. And because this is so far just a single metal we're
talking about, like pure aluminum, pure silver, pure gold, copper, all those form in the structure,
all these atoms should ideally be about the same size, right? If we sketch them with a little more
accuracy, they'd be the same size. Now because it's a non-directional bonding and this thing
wants to collapse as small as it can be, I've drawn it with some gaps here. But in reality,
we know that there won't be any gaps. That's just the way I've drawn it. It would actually collapse
until there's no gaps between the atoms, until they're touching, right? Sometimes that's called
the hard sphere models. Like imagine you had a bunch of marbles and you packed them together.
They're going to rest until they're touching one another. So the question is, where would they
touch? In this model, if I'd drawn it correctly, where would the atoms be touching at? Maybe turn
to a neighbor and take a guess where they ought to be touching. Okay, where might they be touching?
Let me ask, can I pick on you, Randall? Where might they be touching at? No idea? Andrew,
do you want to help him out? Where might they be touching? Yeah, diagonally from corner to corner.
Again, if you draw these atoms along this, they're going to be touching along that direction. So
let's draw our atoms in here, right? I'll try and draw these the same size as one another,
right? Maybe something like that. In a face-centered cubic arrangement, they're going
to be touching along the, what we call a face diagonal, right? It's the diagonal line that
cuts the face in half, okay? They're touching there, okay? Because of that, we can introduce
our next concept, which we talked about previously. It's called the lattice parameter.
Remember, the lattice parameter, A, is this distance along one of these cube edges. We talk
about lattice parameters because it's useful. Like, if you have a big unit cell, you have a
big lattice parameter. If you have a small one, you have a small lattice parameter, right?
So now the next question is, how do we relate lattice parameter to the size of the ions?
Can you think of and try this out? I'm going to try and write an expression that relates
lattice parameter A in terms of the radius of one of these atoms, R. So with a neighbor,
try and write out, what should A be in terms of R? I think I figured out what that is. I need
to get my laptop fixed. I think it's doing phantom touch on the screen, which is a bummer.
Hey, let me ask Ali. You want to give it a shot? Where would you start on a question like this?
That's a 45-45 triangle, right? You could use Pythagorean's theorem to figure out the length
of that diagonal line. So the length of that line, if the two sides are A, what's the length
of the diagonal? That's just going to be root 2 times A. That's the length of our diagonal.
And that's equal to how many radii? It's equal to 4 radii, right? Everybody see where this is
coming from? This chapter is a lot of geometry, but it's not so tricky, actually. It's pretty
straightforward, right? So now you know that, you can rearrange and you say, okay, the lattice
parameter then should be equal to 4 times the radii, whatever your metal ion is, divided by
root 2, right? Straightforward? So again, if I gave you a radii for gold, silver, aluminum,
you could predict the lattice parameter. And if you do this, it's actually pretty darn close to
what the actual lattice parameter is. It's a pretty great way to estimate, okay? So let's do that.
Yeah, you could rewrite it in another way if you wanted. Like 4 is, yeah, you could rewrite it
another way. I don't think it's easier. Okay, let's do this clicker question then. If the lattice
parameter for copper is 3.601 angstroms, what is the atomic radii in angstroms?
Just write, write an expression.
Okay, get your answers in. Another 30 seconds, we'll say. This is just a one-miner calculation.
Okay, answers in. Phone a friend if you need. Okay, we're gonna end. People got their answers
in. Okay, the answer is, what do people think? 1.27 is the right answer. So 90% of people got
something close enough to get credit, and 10% something's off on, okay? So again,
straightforward to do this. You're just gonna say that 3.601 angstroms is equal to 4 times the
radius divided by square root of 2. So to solve for R, it's just going to be 3.601 angstroms
times square root of 2 over 4 equals 1.27 angstroms, okay? Next, yeah?
You could. You could do four safe things if you wanted, which would give you the right answer.
On these, I always accept a range of answers, and I'm pretty generous on my range.
All right, next question is, how many atoms are there in the FCC per unit cell? And to answer
this one, you need to take into account that the structure, again, drawing it is straightforward.
You've got them on the corners, eight of them on the corners, and you've got six of them on
the faces, but not all of these are completely inside the cube. So I want you to figure out
how many atoms are completely inside the cube. So add up the fractions to figure out how many
atoms there are per unit cell. Okay, so get your answers in. How many atoms are there per cube?
Nope, definitely only on the top, left, right, front, back, corners. So nothing in the north.
So again, just to count these, you've got the one in the back right there, the one in the front,
the left, the right, bottom, and top, and the other ones are on your corners, right? Corner,
corner, corner, corner, corner. Okay, get answers in. We're going to end it. What do people think?
How many atoms are there? Okay, the answer is four. So two-thirds of people have got that one
right. So where are we going off? Well, there's eight atoms on the corners, but they're not all
the way in. They're only part of the way in, right? So what fraction of them is inside the cube?
It's one-eighth. One-eighth of that atom is inside, so it's going to be times one-eighth.
And then you've got six faces, but those are now half in and half out because they're centered
right on the face. So that's going to be multiplied by one-half. So this gives you one plus three,
gives you four atoms per unit cell, right? You can see how to do this. Now note that these atoms,
whether they're on the corner or the face, are the exact same atom, right? And in fact,
those are the same type of position because I could redraw this structure like so, right? Let's
say that we have atoms. Here's our corner atoms. We're looking right along the side of a couple of
these unit cells. You've got them on the centers and the corners, right? So you could draw your
lattices like this and fill all space, right? That's one way to do it. But you could also,
a totally equivalent way of thinking of this structure is to draw a lattice from the centers
because then what used to be a quarter now becomes a center. Does that make sense?
All it means is that those are two equivalent positions. They're no different from one another,
okay? You could have chosen your axes either way. Any questions on that? No? Okay, let's keep going.
Next thing we want to cover is what's called the atomic packing factor, and this is a measure of
how close packed or condensed the structure is, and it's straightforward. You simply take
the volume of the atoms per unit cell and divide it by the volume of the unit cell.
So we're going to do this clicker activity together. What is the atomic packing factor
for face centered cubic? And to do this, to make this work, you're going to need to use
this expression that we figured out before, which was that A is equal to four times the radii
divided by square root of two. If you remember that and you remember that the volume of a sphere,
because we're going to model our atoms as spheres, is equal to four thirds pi r cubed.
So with that in mind, go ahead and calculate what should be the percentage, and you're going to give
the answer I think in a percent. Don't use the percent sign, but if you think it's like 90%,
just type in 90 for example. So go ahead and calculate what should be the atomic packing
factor for the FCC lattice. How densely packed are we talking about? How much empty space is
in there? How much filled space is in there? Remember the volume of the cube, you know how
to calculate the volume of a cube. It's just that side length, and you know how to write the side
length in terms of r. So your r's are all going to cancel out, and you'll just get a number.
If you need help, feel free to raise your hand. We've got some TAs.
Okay, another few seconds. If you need to phone a friend, do so.
Okay, we're going to wrap up the polling on this one. Get your answers in.
Okay, we're going to end the poll. Okay, the answer is 74. So 74%, this is correct. These
are correct. This one's just off. You need to turn it into a percent. So where did this come
from? Again, the volume of atoms, there's four atoms, we just decided. So four atoms multiplied
by the volume of atom, which is four-thirds pi r cubed. Divide this by the volume of the unit cell,
divide this by the volume of the unit cell, which would be a cubed, but we know what a is in terms
of r, so let's rewrite this instead and say that it's equal to four r over root two cubed. When
you do this, your r's are going to cancel out, right? So you don't have to worry about that,
and you'll end up with 0.74. Multiplying that by 100%, you know that 74% of the space inside
this cube is occupied by atoms, and this is as dense as you can get with atoms of all the same
size. If you're trying to take marbles that are all the same size, there's no way that you can
pack them any closer. If you meticulously place each single marble and try and fill space, you'll
never do better than 74%, right? Any questions on this? Okay, let's keep going. Okay, next question
is what is the coordination number of FCC atoms? So coordination number, we haven't talked about
it yet. Coordination number is the number of nearest neighbors of equal distance. So in this
room, this is a square lattice. It's only a two-dimensional lattice in students. It's not
three-dimensional. So in a square lattice, if Ryan is our student, right, we want to figure out
what's Ryan's coordination number. How many neighbors do you have of equal distance, nearest
equal distance? You've got four. You've got Nicole and Cody, and then you've got Ryan and I don't
know. He has four, right? If this is a three-dimensional lattice, let's say that he has
six neighbors, right? One more above and one more below, right? So now the question is in a
face-centered cubic lattice, how many neighbors do you have, right? So again, let me sketch it one
more time. A face-centered cubic lattice, how many neighbors of equal closest distance do you have?
You have atoms here on the corners, and you've got atoms on the faces, back, front, side, bottom,
top, right? And then remember, you've got other lattices next to it, right? And you could draw
the same thing there. You've got other atoms above and below. So what is the coordination
number for FCC atoms? Is it 4, 6, 8, or 12? Okay, another 20 seconds. Get your answers in.
Okay, get your answers in. 4, 6, 8, or 12? We're going to end it. Okay, ending. How many is it?
4, 6, 8, or 12? People think it is 12. Two-thirds of people got this correct. It is 12. Now,
where does that come from? Take this blue atom that's on the side of the dice there, right?
That blue atom, its nearest neighbor is half of a face diagonal away, right? We could clearly see
that there's that distance. That's the distance to its nearest neighbor. Well, that is the same
as the distance to that face on the back, to that one on the front, to this one on the neighbor over,
right? So in each dimension of each of these planes, the X, the Y, and the Z plane,
you've got four nearest neighbors, right? On the flat plane, you've got these four. One,
two, three, four. And then in the vertical plane, you've got one, two, three, four. And
then in the horizontal plane, flat with the screen, you've got one, two, three, four.
So it's actually surrounded by 12 atoms. A coordination number of 12 is an enormous
coordination number. That's exceptionally high. Most things don't have a coordination number of
that. But the reason it does have this is because this is what's called a close-packed metal
structure. The atoms are just packed together as close as they can. So the coordination number
is going to be 12, right? Now let's think about what would it be for a body-centered cubic. This
is our next type of crystal structure we haven't talked about yet. So let's draw it up. In a
body-centered cubic, you've got your cubic lattice to start with. You've got atoms on the corners as
before. But now you've got one atom in the very center. That's not centered on a face. That's
centered within the body. So it's completely inside. So first off, how many atoms are there
per unit cell? Yeah. Atoms per cell, there's going to be eight times one-eighth, just like before.
That's from the corners, plus one that's completely inside. We've got two. Two atoms per unit cell,
right? Now what would be the coordination number? Let's see. Actually, let's do the atomic packing
fraction. That's our next question. What would be the atomic packing fraction for this? Actually,
before we do that, let's figure out what the ratio is. Yeah, sorry. Before we do that,
again, the way I've drawn this, they're really spaced out. In a real metal, they're going to
collapse together. Where will they touch in this model? Where will they touch in this model if you
collapse it in? Anybody want to take a guess? Yeah, Rob, what do you think? We're thinking
about two-thirds, or I guess one-third of the way. Good guess. You're super close. It's actually a
quarter of the way across. So let me make sure I've got this right. You're talking about when
you say corner to corner, we're talking about all the way across the cube corner, like that.
They're going to touch one-quarter of the way along that line, right? If you drew this together,
the corner in the center atom will touch, and they're going to touch one-quarter of the way
across. So let's draw that. Again, the slice of the atom, if we drew ... Let me redraw this.
Let me draw the slice that cuts this cube in half like that. So I'm drawing this plane,
right? That plane. That's represented here. The side length is going to be a,
and since this side is a face diagonal, we know that that's root two times a from Pythagoras
theorem. So now what we want to know is what's the length of this line that cuts corner to
corner on that? And again, if you apply Pythagoras theorem again, that's going to be root three to a,
right? Now if we insert our atoms in this structure, you're going to have an atom right there,
and you're going to have atoms here at the corners, okay? So the entire length of that
diagonal line is going to be four ionic radii, or atomic radii, and that's equal to root three
times a. So now we can say root three a equals four r. In the case of face-centered cubic,
it was root two a equals four r. Now it's slightly different. And with that information,
now understanding how to write the lattice parameter in terms of r, let's go back to our
question. The question was, what is the atomic packing fraction in BCC? Again, what's the volume
of atoms divided by the volume of the cube? The volume of the atoms hasn't changed. It's still
four-thirds pi r cubed for each atom, and there's two of them. Now you're going to divide that by
a cubed, but the expression for a as a function of r has now changed a little bit. Let me get
you started on this one. Okay, so go ahead and finish that one up. You know how to write a in
terms of r, so calculate what the packing fraction should be for body-centered cubic.
Again, if you calculate the number and it's a percentage, multiply that by 100. Sorry,
if it's a fraction, multiply by 100 to turn it into a percentage,
and then I just want that number. If you think it's 50%, just type in 50.
Okay, get your answers in. Another 30 seconds. Okay, answers in. Our atomic packing fraction
for body-centered cubic is 68%, so yeah, mostly correct. Again, the only thing to
is recall that now a is equal to 4r over root 3, not root 2 in this structure, because they touch
in a different spot than in the face-centered. So this is less closely packed, right? This is
still a close-packed structure, but it's 68% filled with atoms instead of 74, so it's less so.
Question? Sure, yeah, let me plug that in here. So you've got 4r over root 3 cubed.
Let's do all the steps, actually. So this is now going to be, that'll be 8 thirds pi r cubed
over 4 cubed, so 4 times 4 times 4, right? r cubed over 3. So the 3s are going to cancel.
Did I mess up? Oh, that's not right. Sorry about that. That's going to be 9, isn't it? 9.
So it's 3 times square root of 3, my bad. 3 times square root of 3, okay? When I simplify that,
I'm just going to punch in my calculator. 8 divided by 3 times pi. The r cubed are clearly
going to cancel out. This is now divided by 4 cubed divided by 3 square root of 3,
and I come up with that is equal to 0.680175, right? Or in other words, it's 68% dense, okay?
Okay, we are at, so next class we'll pick up and talk about hexagonal close-packed
and get to theoretical density.

