cách cắt tàn mai vàng - cắt tàn mai vàng trước và sau khi chơi tết - rút cốt cây bonsai _ lý thuyết

music hello music foreign , how to cut it, how to cut it, it's delicious, it's the same and there's a part at the end where I cut the green part, the green part is always for my brothers to hold in the clip, it's easy , then I'll start right away, it's like a grave, then I'll draw in general, the name of the board is very difficult to draw , it's a normal grave, it's a grave, it's easy to understand, it's easy for my brothers to understand, it's a normal grave, let's adjust the phone so it can be heard, how do you cut it, for example, the branch of it will be like this, the grave is full, but you want to play the empty grave like this, right? How do you draw it, how do you play it? First, you will look at the tree, how is it balanced? I will proceed like the root here, why don't I cut the stem out here? Why don't I cut the stem like this? If my brothers can feel it, my brothers can see a whole branch like this, it's long here, my whole body is long like this, right? But if I cut it like this, my brothers can see it from its mother's body, its mother's body is a whole section, this place is too long and it's small, it's even, but it's long like this, then I raise it out, look at my tree, it has no power, and when a second part is my tree, it only has one branch, one branch, this place goes out, so look at my tree, it's very weak, so when you cut it, you have to balance your tree, how high is it? How high is it? First of all, around my tree, the branch of my tree up here, does it have enough branches or not? If I have to cut it high, I can take the height to the end, if not, I will cut the tip first, pay attention to the tip, the half of the tree, so I cut it a little deeper because the tip will be affected by the sun a lot, so the top part of my tip is mostly good, very fast, so my brothers cut it, my brothers should cut this tip, it's short, for example, this tree, I will cut a cut line for this place, the top part here, I can cut it here, cut it here, cut it, cut it here, cut it shorter, then the part up here, I cut it a little longer, so that it grows very fast up here, if you cut it on that name, it's too wide, then later your tree will be affected by the damage on the name, it will be affected by the damage, it is very difficult to raise, because when it goes to the top, my plum tree goes to the top, it goes about 2 to 3 times, its branch will go from 2 to 3 times, it will go from 2 to 3 times, but if you don't have a red press, your tree will be damaged later, just like my tree, it's like this, my plum tree is like this, I don't think it's beautiful, so I forced myself to cut it, I cut it, I cut it like this, it's not always beautiful, Nope, there are many people try to cut it deep everybody knows cutting, my thread is in this cut, it's a pity because it's better than others, it's bigger than people, but it's a pity if you cut it too close to it, but you don't want to be too close, my plum tree is worse and worse. My plum tree is worse and worse. And here under here, the thread is a little bit small when it comes its tendency is a little bit small than here,so I cut it long so that when the sun shines on it, it will be able to develop here. If we cut it up here, it will cover the sun below, so it will be shorter below. So when cutting, try to cut as much as possible to divide it into 3 parts. The first part is cut close to the name, the second part is cut a little bit, and the last part is cut a little bit bigger. Like this, I divide it into 3 parts, this is 1 part, this is 2 parts, 1, 2, 3. The part below can be used to the full extent of this edge. Use to the full extent, but it's just right, use to the full extent possible in the permissible range of this tree. For the second part, we will cut it relatively, and for this part, we will cut it close to the name, because the name is very fast to develop. Every tree is the same. One more thing, why is it better to cut it close? Cutting it closer is better. I draw it as square as possible to make it easier to do. Why cut it close like this? For example, this is a branch, I draw it square to make it easier for you to imagine. I draw it square to make it easier for you to imagine. First, I cut it close like this. My tree here has only 1 branch. In here, it's not always like this, right? It only has about 10 branches like this. If I cut it too long, it won't have enough branches. So I will cut it short like this. So when it grows, I can get 2 branches. 2 long branches like this. Go about 2 steps, press the button. It takes a while to grow, press it and it will grow again. Remember this part. In here, for example, 2 branches, go 2 steps and it will be 7 branches. Press the button again, it will continue to grow. Go about 15 steps, press the button again. It's 15. After 15, if you press it many times, it will grow 2 more. If you press it more, you can see how many branches it has. You have to press it first, then your tree will be full of it, and when you press it again, it will come out like this, right? Maybe the yellow one is a bit like the green one, it's not like the yellow one, because my yellow one can go like this, the ones in here can go like this. It goes like this, but I press it with the same ratio as before, every time it comes out, I will press it. You see, there is one branch here, but now it is 1 year old, I raise 1 branch, but it grows like this, you see, plus the other branches, my tree is very strong. And in the first case, the first case is that we press it very thin like this, press it all the way out here to make it long, we are afraid to press it, we are afraid to regret it, As you can see, this part right here is very loose. When you cut it, there won't be any hair on this side of the tree. Can you see the difference? Now you understand, right? When you cut it, remember to make sure that your tree is thin and small like this. See? Your tree is thin and small like this. If your tree is small and thin, you can also balance it. For example, if you want to cut this part right here, this part will be the same height as your trunk. You can cut it like this. If you want to cut it higher, you can cut it like this. But you have to keep the trunk straight. Don't cut it like this. It will be uglier than your tree. Cutting is also very important. You have to dare to cut it. If you hold a pair of scissors in your hand, you will regret it. You will regret it for the rest of your life. You will regret it. You won't be able to cut it. If you cut it, it will be ugly. First, it will be ugly and not complete. Second, it will be ugly and not complete. It will be damaged. Third, you have to make a crease. You have to make a crease.