Introduction to Materials Science & Engineering
Oct 12, 2023
0:00 Syllabus stuff
15:46 What are the different classes of engineering materials?
28:09 Chocolate tempering is materials science?
35:33 learning objectives for today
36:30 Evidence for charge and mass of electrons
39:49 Evidence of nucleus
40:53 Discrete electron energy levels and introduction to EDS
Okay, we're going to get started.
Welcome everybody to Introduction to Material Sciences.
If you're a mechanical engineer, this might be called a hell of a feature.
There's essentially four different forces that we're smashing on into one thing, right?
So we've got civil engineers, we've got mechanical, we've got material students, we've got a bunch of them, right?
Biomedical, chemical, we've got a bunch of other people.
The microphone's not working. They redid this room over the summer,
and they got rid of our awesome big table that we did demos on,
so we'll have to think of what we're going to do there, and the microphone won't work.
So I will try and speak loud.
If you don't hear me, please, please, please get my attention and say, speak up, and I can be louder.
What's happening right now is I record every lecture, and I'll do so for the rest of this semester,
and I'll post them on YouTube right after class.
I really want to make this a resource for you guys, so instead of just being an hour-long video,
you have to try and dig through it and find, where was that part where we talked about this equation and that?
I actually put timestamps on it in the description of the video, so if you're all familiar with YouTube,
you can jump right to the exact part of the lecture that you care about.
If you miss class, that becomes a really easy way for you to figure out what was missed.
Anyways, let's dive into some of the key parts of the syllabus, and then we'll actually start the class here, right?
So first off, on the book, I sent everybody an email about a month ago on the book for this class.
If you added the course a little bit late, you didn't get that email, but that's okay.
The textbook reading for this class is one that's written by William Kalitzer.
There's like 10 editions of this book, and it's a lot of money,
but I don't see much of a difference between those editions and the old editions, right?
So you can actually use – I think anywhere between the 2nd, 3rd, and 4th edition,
it can be pretty close to what we're using for the official version.
If you want to buy the official version, then buy the 3rd edition.
If you do the 2nd, the textbook, they still wouldn't buy it anymore.
They said it's too old.
So I'm trying to save you guys money.
You should go to find this book pretty cheap on Amazon.
Okay. I will be using the Canvas as the course website quite a bit in this class.
That's where you're going to see homework get posted, announcements, reading things.
If you have questions on homework and you can't make it to the TA hours,
we would love for you to use the discussion feature on Canvas to post a question.
And don't be afraid to be the first person to post a question.
I feel like everyone else already understands it and gets it
because the odds are that people are just as confused as you are.
And if you post a question, people will love it because they can see what the responses are.
So course website, you guys know how to find Canvas.
But it's organized just like normally.
Let me point out just a couple of things.
We'll see assignments in here.
Now within the assignments, there will be four categories at the most.
There will be five.
There will be labs, in-class participation, homeworks, midterms, that everything.
But if you see a mechanical gear, you're not taking a lab.
So anything that I post about labs, let me just tell you now, you can ignore it.
If you're in 2060 or 2070, you can ignore that.
They don't exist to you.
You're missing out.
But everyone else, you can worry about those.
So you will see announcements about it, but just realize that you can ignore those.
The same with civil engineers.
You guys are only here for half a semester.
After that period of time, you'll still get notifications because I've wrapped all these into one course.
Don't worry.
You're done with this semester.
You don't need to worry about future homeworks or midterms
because I get e-mails every year in the middle of the semester concerning civil engineers.
In the files section, this is where I'm going to be posting things like additional reading,
the syllabi for the course, obviously, are there.
But there's also things called class notes.
I lecture out of OneNote, and I like OneNote because I can sort of draw on top of it.
I can build in a lecture style called Notes with Gaps.
So I put the skeleton of each class's notes in there, but I leave gaps on purpose to get people to pay attention
and write notes whenever they want.
If you want to, you can take notes while in class.
You can print those off ahead of time or download them, whatever you're going to do.
Or if you prefer to just listen and take notes on something else, that's fine too.
What I do is at the end of each section is I upload my notes that now have my scribbles on it.
So you'll see class notes before versus after class and other things there in the files section.
In addition to Canvas, we'll be using one other resource, and that's Top Hat.
In the past, I've used Turning Point.
That's a clicker you might have used elsewhere on campus.
And I really tried to make it work, but I just found the software was far too buggy.
The app didn't work.
People would be showing me, trying to put the answer in, and it wasn't working.
So we're going to try something new this semester.
We're going to use Top Hat.
I like Top Hat because you don't have to buy a physical clicker.
You can use your phone.
You can use the browser on your computer.
If you have a phone that's not a smartphone, you can actually text your answers in.
I'm told that this is not a large fraction of students doing this.
But it's an available option.
And if none of those options are available, come talk to me.
We'll work out some custom thing for you.
There shouldn't be an impediment to you.
You can use the technology you have to be active in class.
So how it works, Top Hat, you're seeing what is like a structured view right now.
When you guys are answering questions in class, it will look a little bit differently.
But essentially what I have is I have a whole bunch of questions that I have in class.
I have reading questions, which are really easy questions if you've done reading ahead of time.
And in the past, I did that reading quiz at the beginning of class.
But I learned that nothing sucks the air and the energy out of the room like starting class with a reading quiz.
It's a hit failure.
Worst.
It's just the worst.
And so I'm not going to do that this year.
Instead, Top Hat lets you schedule it.
So I can say that 24 hours before class starts, whenever you want, with a buddy, with whoever you want,
you can take that quiz.
Nobody really tells you.
It's just to get you through the reading.
Because I find in the past when I say do the reading, people don't do it unless there's like some reason to do it.
And we're actually going to give you like a timeline and schedule.
So if you fall behind, you can just get back on and figure out where you're at.
My TA will introduce it in a moment.
We'll show you how to do that.
Another great thing about Top Hat that I really, really like is for each chapter that we're going to cover in the books,
here's the chapters that we're going to cover.
I've gone ahead and I've created what's called a discussion.
I've already assigned this.
So if you've already got your Top Hat subscription, which you're going to have to pay for, I apologize.
It's $26.
But I think it's worth your time.
Like evidence is overwhelming that active learning improves.
I do believe in it.
I hope that the cheap book sort of offsets that.
But for here, you can see in this discussion section that for each chapter I have worked example problems.
Every year students say, I wish you had more examples.
You go through it so fast in the material, I wish we had more examples.
So here's a great way to have that and have it be organized.
When you pull this up, you'll see that in Chapter 2, you can see an example of interatomic forces.
You can click this, and it's an embedded YouTube video.
And up will start playing a video that actually walks through a real-life problem.
You can click the title and go straight to YouTube if you want to see it in a different format.
But that's available for all these chapters.
So I think that that will be a useful resource in addition to Canvas.
That said, most of the time that I lecture will be out of OneNote.
It will be something like this.
Let me introduce one quick thing here.
I'll get to it later.
So let me introduce the TAs for this class.
This is a great big class, and it's a hard class.
And so we want to make sure that there are just so many resources that even though students come from lots of different lifestyles,
you've got work, you've got kids, you've got co-kids, you've got on-campus, off-campus,
we want to make sure that there's a resource that can help you do well in this class.
So let me introduce our five TAs.
Can I have you guys stand up?
So we've got five just cream of the crop, really, really awesome TAs.
We've got Matt over there, Sarai, Logan, Danny, and Ashley.
They are just phenomenal.
And their goal, their 100% goal is to be your advocates in this class.
So I'm writing test questions that are too hard.
I have my TAs take the test first, and they say, Sparks, knock it off.
Like this question has no business being on a test.
And I try my best to listen.
And they are really your best advocates.
They oftentimes hold study sessions.
The way that we've structured homework help in TA sections this semester is homeworks
are always due on Wednesday, right?
Classes Monday, Wednesday, Friday.
Homework should be due on Wednesdays.
And so in the past, we had one Tuesday night section, which was really helpful,
but it was just slant.
They actually held it in this room, and it was just so many students,
it was hard to get all the help that I think we needed.
So now we try to space it out a little bit.
I assign the homework typically on Wednesday or Thursday.
So for those of you who are smart, it will start on Friday,
and we have some office hours to get you started.
For those of you that put it off over the weekend,
we front load at the beginning of the week with office hours.
We try to do things in the morning and evening.
And if these times don't work, any time that my office door is open,
you can pop by, and I'm delighted to help you out.
And if you can't find that to work out either,
then you can use the discussion section on Canvas,
and we respond to that really quickly, right?
We pride ourselves on being pretty good at responding.
So that's our TAs.
I've got their contact information here as well as where they're going to be
holding their office hours.
So again, they're your advocates.
Get in touch with them.
They're going to do a great job.
Thanks, guys.
Okay.
I will always hold a – myself, I'll hold a personal review session
the week of a test.
So tests are always on Friday for midterms,
and on Tuesday, Wednesday, or Thursday,
I will hold a review session myself in the evening.
And if you can't make it to those, don't worry.
I screen cap those and post them on YouTube as well.
All right.
So there are some concerns that crop up every year.
You've probably heard them from your peers, right?
Here's the three most common concerns they plot.
First one, some of the material that we cover is not in the textbook.
For example, thermodynamics.
We're going to have some additional reading in the course notes.
So should you be worried?
Not at all, right?
The second concern is some of us might have seen free energy
or reaction equilibrium in the second semester of STEM
and others haven't, right?
For some, they've taken the second semester of STEM,
and some of you guys haven't.
It's not a prerequisite for this class.
Don't worry.
We're going to teach that in this class.
We've got oodles of examples, so you don't need to be worried about that.
And the last one is we're slightly out of order in the book, right?
The reason we do that is because we've got civil engineering here,
and I want to make sure that since we're only here for the first half of the semester,
that we get the most important stuff done first.
Things like fracture.
I feel like civil engineers ought to know about fracture.
So we're going to talk about that, right?
But that's chapter 9.
So we had to move things around a little bit.
But trust me, it'll be okay if you go a little bit out of order.
Okay.
I already talked about notes with gaps.
Let me say a little bit more about the notes.
The notes that I prepared are really I read through the chapter,
and I said, ooh, that's good stuff, that's good stuff, I'm going to keep that.
But it's certainly not exhaustive.
The textbook is more exhaustive than that.
And so you'll be responsible for the stuff that we talk about in class, right?
If it's in the textbook and I didn't cover it in class,
it's not going to show up on a midterm, right?
In fact, I have a very strict rule for myself
that I would never put something on a midterm
if you haven't seen it on a homework, right?
It needs to be content.
I might ask you to rework it in a different way.
That's reasonable.
That's applying what we've understood.
But I will make sure that you've seen it on a homework first.
So if you're seeing lots of stuff in the book and we don't get to it, great.
That's stuff that you don't have to worry about studying.
Okay.
I've already mentioned that I screen capture these classes.
You can follow the link.
You can subscribe or just follow it each time if you want.
I'm posting the lectures to this YouTube playlist.
It should be embedded in the course notes when I download that.
Okay.
We're going to talk about Top Hat.
We talked about labs.
So a little more about labs.
Labs will be held Tuesday or Thursday,
those of you that are taking the labs.
Those will be great.
They'll be typically every week,
although we do have weeks off, weeks of a test.
We don't have to make you worry about doing a lab those weeks.
That week is Black Hall on Thanksgiving break.
They're going to be great.
Many of you are going to have – no matter what you do, actually.
You're going to have to do technical writing of some sort if you're an engineer.
And we're really trying to drill down this year
and making sure that technical writing for these labs help prepare you for your career.
So I hope we're doing a good job on that.
It's our goal to make that better than any years past.
Okay.
Homeworks.
I already said that they're challenging.
You really do not want to wait until the night before on homeworks in this class.
They're challenging.
I give you some book problems that will at least teach you how to use the equations.
But when I write test questions – well, first off, when you look at a homework,
all the questions you see there are old test questions
or something that I would consider the equivalent.
So they're challenging.
You want to start early on those for sure.
If you do buy a book that's not the third edition, which is the official textbook,
in the reading – in the file section of Canvas, I've got – where is it?
Right here.
The scanned third edition homework problem.
Every year, without fail, it happens.
Even though I announced this, someone will buy the fourth edition
and will do the book problems out of the fourth edition.
So if you do buy whatever other edition of the book that you wanted to get,
you can pull up the homework problems to do right here.
We've got them scanned in there.
Yeah?
Just to clarify, the lab starts this week?
Yeah.
So if you are a 2010 student, start this week.
We're actually going to talk about lab safety and writing lab reports this week,
even though you're not going to be making cool experiments in the lab per se.
So you will be starting this week.
So be there tomorrow, those that have Tuesday labs.
To get the homework back to you, we used to pass it around in class.
That's not allowed anymore.
So you're going to have to actually pick it up from either my office
or from the TA's during office hours.
To make that easier to get it back to you, we will alphabetize the homework.
And let's say that if there's going to be 10 homeworks over the course of the semester,
we won't just put those all together.
We'll bundle them together in our advance.
But still, it gets hard for us to keep track of everything.
So it's easy to pick it up sooner, and there's less of it in this giant bin
to dig through at the end of the semester.
But it's up to you.
You don't have to pick it up.
But if you want to, it's in your interest.
One of the reasons why it's in your interest is because we can't grade
every single problem every week for all 150 students in here.
So instead, what we do is we pick select problems and grade them.
We won't know which ones those are ahead of time, and we grade all of those.
So if there's a total of, say, 15 questions,
most of them we book, and then three test questions,
we'll grade, I don't know, four, five, six of those.
So be aware that we're not grading everything.
So what that might mean is you can look at the score you got,
and 10 out of 10, you're like, oh, fantastic.
But it might be that we just didn't grade a problem that you actually did incorrectly.
So I do post solutions.
You definitely want to look at those.
And I think it's a good idea to actually dig up your homework
and make sure that you worked it correctly afterwards.
Getting your name back to you.
If you've got many last names, which some of you have,
just circle the one that you want us to alphabetize it by.
Circle that first letter.
And we're happy to look at grade errors on tests and midterms.
That happens.
We're humans.
We do our best to make sure that things are graded fairly and correctly.
But if it is the case that there's a mistake, you can come to us and get a regrade.
But we ask that you do it within a week.
Because otherwise, at the end of the semester,
everyone's trying to get final points wherever they can.
And we just can't go back and regrade things for the whole class at that time.
So you've got a week to basically ask us why you got the score you did.
OK.
Let me just say, I bring it up every year, that cheating will not be tolerated.
We will take great lengths to prevent cheating in this class.
And when I first taught it, I didn't know.
And I'm happy to say that we haven't had nearly as big a problem
in the last couple of years.
We've really cracked down on it.
So I'll just say, don't make me have that conversation with you.
It sucks.
We have to talk to the dean.
We have to talk to the chair of your department.
It's an uncomfortable conversation.
So don't cheat.
Instead, get the help you need before that you're in trouble on a test or something.
So how do you do well in this class is another common question I'll get.
The way to do well in this class is to do the reading, come to class,
start the homeworks early.
And if you ever don't get something, come talk to me.
But do those things, and you'll be just fine in this class.
Start the homeworks early, come to class, do the reading before class,
and ask questions.
Okay, who's taking this class?
This is the breakdown.
Mostly mechanicals, and about a quarter of them are material students
with a little bit of everything else.
So what are we going to learn about?
We've got another 30 minutes or so.
What are we going to learn about in this class?
What are our learning objectives?
Well, here's the learning objectives that I can think of for all of you
as engineers of all these different disciplines.
I want you to know what the relationships are between the structure of material,
how we process those materials, and then the properties we get out of them.
Those three things, that's like the heart of material science,
structure, property, processing, the relationship, the linkages.
I have some neat examples of that.
I want you to know what material to use in different instances.
If you're designing a road, if you're designing an overpass,
if you're designing a car that travels on that road,
if you're designing the glove box within that car,
all these things might have very different materials
that you choose to make it out of, right?
And the goal in this class is to give you a big-picture idea
of what materials are out there,
and how you down-select the one that's appropriate for a given application.
I want you to understand the difference between amorphous,
or glassy materials, and crystalline.
We're going to talk a lot about crystalline materials.
After we introduce the concept of crystalline materials,
people describe defects.
So when things aren't perfect, right?
Because I can imagine a perfect three-dimensional structure,
but what if you've got a messing atom?
What if one of those atoms is just crammed into the spot
where it ought not be, right?
What does that do to properties?
We're going to talk about that.
Actually, it's very important.
Something that I've been passionate about myself as an engineer
is sustainability.
I think that engineers, oftentimes,
we're only driven by the bottom line.
It's like a boss.
He or she may be only worried about the bottom line.
I think that we should care a whole lot more about that.
And actually, the TAs have requested to teach that section this year,
and they're going to do just as bang-up job on that.
So I hope that...
We don't have a ton of time to spend on it,
but we will talk about sustainability,
and I hope to weave it into the course throughout
in terms of renewable energy, recycling,
the broader impact that technological development has on society.
Something else I'd like to have you guys do
is be able to predict materials' properties
from a given composition, a structure, or an environment, right?
So if you've got a metal at a certain temperature,
I'd like you to understand if it's going to close or not,
if it's going to be weak or not, if it's strong.
And the last learning objective that I'd like to get across to you
is how are you going to know what phases of matter are stable,
and if not, how rapidly, what sort of timeframe
before they evolve to a different phase
that's even better for working on this project.
So maybe before we get started in diving into these learning objectives,
let's just start by examining what different classes of materials are out there.
They're all around you.
Literally, you can start pointing to different things around you,
and you can see the different classes of materials
absolutely surrounding us, right?
And they sort of all have their strengths and weaknesses, right?
It's not like there's one that's good for everything.
They really are fit for different applications.
Take polymers, right?
Polymers in general, and again, this is general,
there's exceptions to the rule,
they're flexible, lightweight, and can be easily processed, right?
If I had to sum up some of the key things about plastics or polymers,
that's what I'd say about them.
For those exceptions, take Kevlar, and that goes for the best.
That stuff is certainly not very weak, like many polymers are.
It's not even very flexible. It's pretty rigid, right?
That's what we use it.
You've got other things that are not very processable at all, right?
You've got styrofoam in class.
You've got elastomer, like rubber bands, right?
They're very, very different classes of materials compared to anything else, right?
Beyond polymers, you've got your ceramics,
typically known for their high hardness values,
high strength,
their high melting points, and their brittle nature, right?
You see them fractured pretty easily.
Any of you who've had a dinner plate or a glass that's dropped,
you know the breakage easily.
So you might not think that they're strong materials,
but in fact, they have high strength,
but they have also low toughness, right?
So we'll talk about the difference.
What do we mean by toughness, which is strength?
Ceramics are an interesting class of materials.
That's what I work mostly on,
and I will tell you, when should you use ceramics?
Only if everything else fails.
Like, they are miserable, horrible things.
But sometimes,
sometimes they do the job.
Like, for example, take this artificial knee,
or the artificial hip, right?
Why would you put that? Let me just ask you guys.
Based on the value I told you,
high toughness, high melting point.
Why on earth? Maybe turn to a neighbor.
By the way, I'll be saying that a lot this semester,
because I want you guys to actually not just be listening,
but to interact.
Turn to a neighbor and say, why on earth,
if inside of that hip,
why is the end part of that, the pink part,
why do you think they made that out of ceramic?
So, Jack and Jelly, go ahead and think.
...
Sam, why, what do you think?
It's a lot like bone.
Okay, so replacing a ceramic with another,
that's already a pretty good idea.
Alright, what else?
Yeah, that's exactly right.
How many times, you can think of,
that would be a step counter if you kind of keep track of this.
10,000 times a day is like a normal day.
10,000 times that like, that little ball and socket
has to like slide past each other, right?
What if it was a soft material, right?
Then could it get,
what if it was a little bit of a bone?
If there's something in there, and it like grinds into there,
that's a problem, right?
So they picked it exactly because it's durable.
Durability is the number one reason why they picked this.
Now, why not a metal or a plastic?
They pick a ceramic because it has a high hardness.
Anybody want to venture a guess
why hardness and durability are related?
Especially in this case.
Any guesses? Hardness and durability.
Because ceramics, we just said that they're brittle.
It doesn't sound like something you want on your hip.
So why, why do we do it?
Yeah.
That's really important, right?
Every time I jump up and down, right, I'm loading it.
It's a permanent deformation.
Because every time I walk, it might rub or break.
I don't know that. That's a good one.
What else? Why does hardness matter?
Maybe lower friction.
It is lower friction.
Why does hardness lead to lower friction?
Exactly right. Any thoughts?
Yeah. It's not going to scratch or anything like that.
It's smooth.
Once it is smooth, it won't get not smooth, right?
It won't get scratched.
And actually a hard material is one that you can
polish to a higher smoothness to start with.
That's not intuitive at first.
But if you have two materials,
two types of steel, say one's harder than the other,
the one that's harder will take
a longer time to get it smooth and more challenging,
but it gets a much finer smoothness.
And if you've got a ball and socket,
you definitely want that smooth because then
there's less wear, right? So you can see that
even though ceramics are like a miserable class of material,
they have properties that make them useful for
at least one application.
Right?
Okay, that's ceramics. Let's talk about metals.
Metals, again, in general
are excellent conductors of both
heat and electricity, and there's exceptions to that.
There's one that don't actually conduct
heat that well, right? But most of the time
they do those two things. They're typically
ductile, that's not always the case, and they're
generally fairly strong, they're not as much as ceramics, right?
But you can see
exceptions to this. Like we can process them
in really interesting ways, right?
This material on the top left is
by far the lightest weight,
lowest density structure that's ever been made.
It's made at HRL,
University of California.
We'll talk maybe a little later about how they make that.
You can make things that are
shaped memory alloys, like these skins up here.
These skins, they start out
collapsed, they go in some sort of blood vessel,
right? And then at a certain temperature,
your body's at a higher temperature than the room temperature,
after a certain period of time at that temperature,
they automatically pop away,
right? This shaped memory alloy
has an energetic driving force to do that
when temperature changes, right?
They've got some interesting functional properties,
though, too. They're easy to
recycle, generally speaking, more so than
some of the others, so they have some advantages for them.
There's also semiconductors, right?
We can talk about semiconductors. These things, we all
carry extremely dense
semiconductors in our pockets without even giving
any thought. But semiconductors are devices
that make possible things like LEDs,
like integrated circuits, like transistors,
lasers, photovoltaics,
on and on and on.
Semiconductors are an interesting class of tools
because they sort of lie in between ceramics and metals.
In terms of properties,
both mechanical and electrical, they're sort of in between
those two different classes, and we'll get to
some of those more details later this semester.
And the last class is really
just mixtures of the other
classes we've described up until now.
Composites take advantage
of the strengths of two different classes
of material to get an overall
engineering product which has
some of the best of both.
That's the weaknesses of both and the strengths of both, right?
So take, like,
glass fiber, right? Fiberglass, you've seen that
before when we make boats and stuff out of it.
Why do you think, turn to a neighbor
and discuss, why do you think we make a boat
out of fiberglass
as opposed to just epoxy or just glass?
Because that's what it's made of. Epoxy
and glass fiber. So turn to a neighbor and discuss.
To make airplanes nowadays
instead of just good old-fashioned aluminum.
What do you think of that? It's light.
It's light. It's lighter weight
than a lot of metals, right?
Does that matter for transportation? Yeah, you betcha,
right? Already,
quick question, do you guys realize how efficient your cars are?
Right? What would you guess?
Fraction of energy
actually moves you forward with a gallon
of gasoline. 30%?
That's a darn good guess. It depends
on your vehicle, if the rail lines are, right?
30's pretty close. It's about 20%
on average, right? So a lot
of that is just moving this hunk of metal
or whatever forward, right? So the lighter you make
it, the more fuel efficient your vehicle's
going to be. What else? So density's
a big one. Probably the biggest reason that
we do many components is just to get the density
down. But what else? Are there other benefits?
Yeah, we think, right? Very strong.
Very strong. Yeah. We just
finished saying that these fibers,
these are glass fibers or carbon fibers,
those are going to typically be high strength,
right? So you can actually get an overall
increase in strength of your material.
Now, is that always going to be the case?
We're going to have to take into account
here kind of two main things.
When you pull it this way
versus transverse to that,
you can expect very different properties,
right? In one case, you're loading along the
fiber axis, right? So you're
going to have one set of properties. In the other one,
the fiber aren't really doing much, but all the load
might be carried by the, what we call
the major phase, right?
And that might not be very good.
We could go on and on, right?
So the two main things, let's say you make a carbon fiber,
like a panel like that, how do you join these things?
That's like a really, that's an important area
of composites is, okay, you made the thing,
how do you join it to the rest of the components
in your overall device? That is often
the most challenging part of composites.
Okay, so that's material science.
But what else is material science?
Is food material science?
Is chocolate material science?
Clearly it is, compared to demo, right?
If you want to learn more about it,
I think there takes you to
one of the most fascinating thoughts from a guy
from Mars who talks about, for like
hours on end about the science of chocolate.
I'm going to not do that.
I'm going to do something that I think is neat.
So over the weekend, this is like,
it makes me a little bit sad that I do it every year
because it means summer's over, but the week before
class, I cast chocolate
in preparation for this class,
and I do so and see
the following, right? So let me get my
computer, I'm going to go try and take a picture of these.
Oh no, I've got something, never mind.
So mine looks similar to what you're
going to see on the screen, right?
Every year I cast it, and you might have seen this before, right?
If you left like a candy bar in the car or something,
it started out nice and
like that dark color, and after a while,
that's actually what's called
chocolate cream. Chocolate is made of what?
What is that?
It's sugar and fat.
It's cocoa butter, right? It's a type of fat.
So it's basically two bases, right?
I mean, depending on what you put in it, right?
And what happens is that under
certain conditions, those two
components separate from one another,
right? So there's a structure
where they stay together, and that looks like
the chocolate you want to eat, and there's a structure
where they don't stay together, they face separate,
and that looks horrible,
right? It's the same thing.
It's the same component, it's not molded, right?
And so what I do is every year
I cast it two different ways, right? Here's our
Lego men, right? We cast these,
we're scientists, right?
We've been experimenting ourselves, and the top
one is what's called tempered
chocolate. There's four on top, and the bottom
ones are untempered, right? And at
first glance, this is...
In fact, this is a little bit funny.
So ignore that. But after
even a day later, and
certainly after a week later, they look
like this, right? Your Lego men
look like they have leprosy,
right?
It's not good at all.
And you can actually see this, there's a sweet
time-lapse video we'll show you.
Check this out.
So here's our friend from Barcelona,
talking about what I was describing a moment,
and then he shows the chocolate that they cast
in a tempered versus an untempered state,
and if you look at it, there's some time-lapse.
Very
clear separation of the sugars in the fat,
right? Which just is not
appealing to eat
at all, right? So we need
four brave souls. Actually, we could do
a bunch of brave souls. Who's brave? Come on down.
Come on down. Is it Colby?
And I didn't catch your name.
Josh. Josh and Colby, who else?
Two more, at least. In the way back.
And right here. Come on down.
Adam and Jordan.
Adam and Jordan. Okay, so you guys are going to
try some chocolates for us.
So first off, try
the untempered chocolate,
right? I promise these are all like
Ghirardelli, like they were nice chocolates to start
with before I cast them
in an untempered state.
And thoughts on the untempered
milk chocolate. By the way, I used to do this
with dark chocolate, but I've discovered
that millennials are humans and they don't like dark chocolate.
I don't
understand these people, but
I have an accommodation for milk chocolate.
What do you think? Shocky. Shocky
is the perfect word for it. The texture's not
right. Once you mash it a little bit,
it's still milk chocolate, right?
The flavor's about right, but the
texture is just awful. Now take
that one and try to snap it for us.
There's no snap. It just crumbles, right?
Usually we have a nice microphone and I take
one of these things and like, it's
got a snap. This stuff's nice. This stuff
has no snap at all. Alright, now try one of these.
The same exact batch.
Grab something.
If you want the untempered stuff,
maybe come get some of that one.
Okay, what are your thoughts?
It's better. It tastes more normal, right?
It's smoother.
The initial crunch is not great.
Okay, thank you guys. Thank you so much.
So what did
I do differently, right?
What was the difference between these different chocolates?
Here's the key.
And this is how it ties into material science, right?
Chocolate is a mixture
of two components.
Tons of the things that we're going to work on
this semester are a mixture of multiple
components. If it's steel, then that's
iron and carbon, right?
So when you mix these components
together, they might be in a single phase
or they might be in two phases
that phase separately. For chocolate, you want a single
phase. Now, when you heat chocolate
up, there's actually six
different ways that
that chocolate can arrange itself together,
right? You can imagine, like,
for every fat molecule, you've got like a sugar next to it
and a fat and a sugar, like an alternating pattern
like that. So that's like the beginnings
of what we're going to be talking about this semester as a
crystal structure. It's more
complicated than that. But think of it
right now as just ways of arranging these things
together. And it turns out
when you cast chocolate, say heat it above
what's going on above? Say 36 degrees
Celsius. Celsius going up.
Alright?
Keep it above there and it's a liquid. If you cast
it, what it's probably going to form in
is one of these phases down here, right?
And these first four phases,
while initially
they're single phase, they're
what we call a metastable
phase. Metastable means what?
Metastable. Not real stable.
It's unstable, right? It's temporary.
A little bit of energy fluctuation
and it's going to switch to something more
stable. And that more stable
phase is the two separating.
And that's not what you want. So instead, tempering
chocolate, all you have to do is
you heat it up to melting,
right? But before you cast it
into your mold, you cool it
down in that narrow, and we're talking
a couple of degrees difference, right?
In this case, between 32 and 36
degrees. Either of those top
two phases are stable,
right? So you hold it there
where it starts to thicken, right?
It makes it harder to cast. It's not as runny and liquidy.
So that's why my things aren't in
what we're looking, because it's a little bit
thicker to cast. If you put
them that way, then they remain
stable. Other things you can do is you
can cast it in the total liquid phase, and
then put the whole entire mold in an oven
and hold it at that temperature.
There's other things you can do. You can take seed crystal,
so take that really nice Ghirardelli chocolate
that you had just melted, but save
some of it, and when it's ready
to cast, cool it down by adding
chunks of the stuff that's already in the right
crystalline phase. Ghirardelli definitely knows what they're doing.
And add that in, and those
will grow. Just like seeds grow,
they'll grow in the big phases of the
right microstructure. So even
something as benign that's all
around us like chocolate, right?
The food that we eat is actually subject
to quite a bit of interesting engineering,
right? In this class, we're going
to be understanding how aluminum,
steel, plastics, rubber bands,
all these things,
they all have properties you want to
get out of them, and understanding how the
structure relates to those properties,
and how processing gets you to that structure,
that's this one. That's material science.
Okay? Okay, 15
minutes left. Let's
go ahead and dive right into
the first chapter, right? We've got 15 minutes left.
So what are our learning objectives for today?
It's something I'll try to do every day in my lecture,
tell you what do I think the objectives
are, and today, my objective
is to help describe
how atoms exist in terms of
electronic orbitals. This is stuff you've seen in chemistry.
I'm calling this, like, chemistry
fast-forward, but just hit the highlights so you remember.
I'd like to be able to
calculate between energy
and wavelength of light.
As electrons hop between different orbitals, that's different
than energy, so it's going to give off light.
We're going to figure out how to calculate those things.
And we'll tie that into
EDS, a really powerful
engineering tool.
We're going to learn how to write electrons and configurations,
and if we have time, we're going to talk about
inter-atomic forces. So if you've got two different atoms,
say sodium and chlorine,
it makes up salt, sodium chloride,
how do those things interact with one another?
Especially if you bring them close together or further apart from one another,
we're going to sketch the inter-atomic force
and therefore the energy. Okay?
So let's start with chemistry and fast-forward.
You know, chemistry
answers, I think, one of the...
If you didn't love chemistry,
let me make an appeal for you to love it after this semester,
because I hope that if you didn't love it,
it's because you didn't see the applications of it.
And engineering, particularly material science
engineering, it's applications of the chemistry
principle towards problems that you might actually care about.
And it answers all sorts of
questions, right? Why are some solids
soluble in water like salt,
but other ones like sand, not?
Why does something
melt at a high temperature versus low?
Why do things like noble gases exist,
and why are the gases not like salt?
All of this can be explained by understanding
the principle thing is bonding.
But before we get to bonding, we have to go back to the
structure of an atom, right? So,
structure of an atom, we're going back to the turn of the
century, right? We've got Robert
Millikan and
J.J. Thomson, right? J.J. Thomson
figures out that there's these things called electrons,
and they've got a charge. He knows that
because he puts them in an evacuated tube,
he applies a voltage across it,
he starts bombarding the one end of the tube to the
other, and when he puts this plate
in the middle of that path, and you put the
charge on it, they drift up and they drift down,
and he says, ah, I'm
adding positive or negative charge to this plate, and I can make
it move. Therefore, they must be interacting
electrostatically with that, right? So we know that electrons
exist, and they've got a charge.
Next comes Millikan, and he figures
out the mass of an electron in a way
that just boggles my mind.
You probably saw this in the oil drop experiment.
People follow this.
This is amazing. He literally took, like,
a sprayer, right? Like, he
misted oil into this thing.
In that cavity, gravity is acting on the
oil drop, so it's falling downward,
and then he applied an electric field
the other way. So, if these things are
charged, the electron will have, like, negative charge.
If you apply a field the other way,
you could apply, you could feasibly pick a
voltage where the upward
force of the electrostatic propulsion
matches the gravitational force
of, you know, falling, and that's how he figured
out, based on the size of the droplet table,
he figured out
what the charge of an electron must be
as well as the mass. Just
mind-boggling that that actually worked.
That seems, like, crazy. If my student proposed that to me
in my lab, I'd be like, sure, that's not
gonna work. Don't do that. And it worked!
And it was a Nobel Prize, right?
By the way, while we're on
the subject of Millikan here for a minute,
Robert Millikan, he wasn't even an engineer.
He wasn't a physicist. He was a classicist.
What's that? Means he studied Greek and Latin.
That was his thing, like,
Princeton or Yale or somewhere, right?
And they needed someone to teach their
physics course, Newtonian mechanics, right?
He was not a physicist, even when they were
taking the courses, but he said, I need a job.
I'll do it, sure. And so this is what he said,
I doubt if I have
ever taught better in my life than my
first course of physics in 1889.
I was so intensely interested
in keeping my knowledge ahead of that other class
that they might have caught some of my
interest in engineering. Can I say that that's
still me six years later after teaching this class?
I still get questions from
you guys where I'm like, I don't know how to
answer that.
But I hope that some enthusiasm
and interest will bleed over.
Even if you're a natural science student, I don't care.
I hope that this class will be worth the tuition money
and that you'll have some interest in these things that we're learning about
and it won't just be to check off a box.
If it's to check off a box, that's okay, too.
So we know that electrons
exist. We don't know about neutrons,
nuclei, though, right?
Here's the Rutherford experiment. They take
particles, pretty big particles, right?
It's like alpha radiation or something.
They had alpha particles, and they had a very thin
sheet of foil with this illuminating
detecting screen on the outside, and they
shoot it through the foil, and they expect
it all to just go straight through.
And all of a sudden, some of it bounces back.
When you read what he said about this, he basically
described it like, this is shocking. He held a piece of
tissue paper, like a Kleenex, and shot it
like a giant battleship cannon,
and saw it bounce back. That's how shocked
they were. That some of these would bounce back
and they just could not understand. And what they realized,
there must be something in here.
There must be a dense, but very small
core that electrons
or particles, when they hit, will bounce back from.
And all of a sudden, we know that there must be a nuclei, right?
So it's not our beloved plum
pudding model, where positive charge
is just sort of everywhere, with electrons like
raisins in the plum pudding. Instead,
electrons, you know, are occupied
some volume, but then the core, which is positively
charged. Okay, let's
move to Geiger, Marsden, and Rutherford.
Oh, that was them, sorry.
Now we move to Rydberg and
Bohr. So we know that electrons exist,
but are they this nebulous
cloud just floating somewhere around the nucleus?
Or do they sit in certain spots, right?
So Rydberg realized that
they actually sit in certain spots.
And how he figured this out, is he took different
metals and he burned them. And when he burned
them, he basically had a prism,
which seemed like Pink Floyd album, you know,
that light comes in, and it
splits, right? So
Rydberg was doing Pink Floyd stuff
in 1888, and he
realized that different elements split in
different ways. And he says,
why is it different? First off,
why is it discrete? It's not just
banded. Because when you see metal burning, it's a bright light.
So why is it when you split that up
that there's a certain discrete level?
And why do they depend on what the metal
uses up? So Neil Borkman, who I
don't know if all the people know what I'm writing,
he said, there must be
discrete energy states,
their electrons occupy, and they must
be able to move between these states.
And since energy is neither created or
destroyed, but just converted from one form to another,
that difference in energy manifests itself
as radiation, or light, electromagnetic
radiation coming off these states,
which has a different wavelength depending on
the energy gap between these different things, right?
And this brings us to
the first amazing
material science tool that I hope we can
develop. It's called EDS,
Energy Dispersive Spectrophotography.
It's going to be on the first homework, for sure.
It's going to be on the midterm probably.
EDS, Energy Dispersive Spectrophotography.
Here's how it works.
If you're working in a lab somewhere,
for Intel, or for Black Diamond, or for whoever else,
let's say your competitor makes
a newer, better ISMO
than yours, and your boss says,
this will not stand. Figure out what they did
so we can do it better. And they hand you
the thing, right? One of the very first things
that you're going to do is chop it up into pieces
and look at what the structure is.
Okay, some metal over here, some places.
And maybe, like, you know, a bunch of different phases,
right? And you look at a bunch of different regions.
They clearly look like they're different.
How are you going to figure out what's there?
EDS is a great tool for this.
Here's how it works. If you guys are
all electrons, moving outwards,
to higher energy values, and this is the nucleus
over here, think of electrons
as people that go to
the theater and really want to get there.
So there's an empty seat here.
So Hunter's like, yeah, I do want
a row two, when I can just move
forward to row one. Like, it's so
much better in every way. So he's like,
Hunter, come on, what are you waiting for?
So he moves down
in energy, and in doing so, he's
going to have to do what?
And again, it's restored energy. What are you doing
to your energy? Yeah, that's what we're
going to do.
Beautiful, Hunter!
Yeah.
He gives off a characteristic, a fingerprint
radiation level, right?
And, you know, that was because it went from
what's called this energy level two to one.
And these have specific names.
That's the idea. So, for example,
Chantelle.
If she moved down,
it would have given a different energy.
Come over here, Chantelle.
So that's going to give off
a different energy level
than Hunter gave off. So all you need
to do to do EDS
is you need two things.
You need a way to create empty
seats, and then you need a way
to measure the radiation that comes off.
Now it's like, cool, right? So what do we do?
We can't use this tool anymore.
What do we do?
You can go through it, too, because
let's just say that everything was
all down below.
It's a good concept.
There's no empty seat.
In the back.
Remind me your name again? Jordan.
They might go further back.
Things won't go up in energy unless you make them.
But what else
can we do?
You can get something up.
Brian, did I ask you to go back a row?
So I need you to move back.
How do we do this in metals and atoms
and whatever? We take an electron
gun. They actually call it an electron gun,
right? It's a beam of electrons.
We bombard this thing, and some fraction
of those electrons will hit an
innermost electron and bump them
somewhere up. You'll take that energy and say,
I'm going to go to the center. I'm going to go higher and
go up, right? And there you go.
Meanwhile,
Elias is going to say that there's an empty seat.
So that's
how EDS works. It's that simple.
So when I talk about different types of radiation,
there's K-alpha transitions,
K-alpha 1, K-alpha 2, L-alpha.
All that is, it's just
fancy lingo for which energy
levels happen from where.
These are our quantum numbers.
We know that n equals 1.
There's only two electrons.
Anyways, hydrogen and helium
occupy these sites.
So
if it moves from 3 to 1, that's going to have
a specific terminology or name.
All those have specific names, but don't get hung up
on that. The principle is
the same, right? It's just transitions and preserving
energy.
Other things that we can learn about
Let's see if we have time. Yeah.
Other things we can learn about the periodic table and from chemistry
is that there's trends that exist
in the periodic table.
For example, there's something called ionization energy.
Ionization energy is different than EDS.
EDS, we took an electron's
gun, and we bombarded it, and we
hit somebody like a crime and sent them flying
to a higher energy level. That's not how ionization
works. Ionization energy is kind of like
a vacuum, right? Imagine that somebody had a
giant shop vac in the back of this room,
they hooked it to the door, and the outermost
people are going to go flying off first.
That's ionization energy, right?
How much pressure of air
sent out of this room is required before somebody
goes flying out? In electron
speed, we would say how much voltage is required
before you strip off the electron, right? Ionization energy.
So which one's going to be healthier and tighter?
So turn to a neighbor, you remember
this in chemistry. How does the trend
work? And it's probably where it's going.
Ionization energy is what we get to, right?
So this is ionization
energy as a function of numbers.
So as a function of a number, first I'll do
We know
we said that these are shells,
but across a shell
they tend to get harder to pull off.
The first one is really easy to pull off.
The first one in that shell is always the easiest
to pull off. Why do you think that is?
That's always the easiest to pull off, the first one,
but it's really hard to pull off
because it's very loud. The second one is hard on it,
it doesn't want to lose its electron charge.
So yeah, for one thing,
the further out it goes,
one of them will be better than the other one, because these are negative charged.
The closer they are,
that should be
So this is harder,
not easier. So what's going on?
Harder to pull off. What do you think?
Is it filled?
This shell fills up,
and when it's totally filled,
this is like the first bit of quantum mechanics.
We won't teach you why this is the case,
but I'll tell you that electron shells
like to be filled,
empty, or you can see evidence of that.
Take these guys in the middle.
When they're half filled, there's a slight energy bonus.
And then when you're
taking away that one,
it doesn't like it anymore.
You can see that right in the middle.
So when it's a filled shell,
it's in a happy state.
When we say happy, I mean lower energy.
Energy,
we're talking about Gibbs free energy,
we'll get to that in a few minutes.
So that's ionization energy.
So this was another clear evidence that there's some trend here,
like bands, or shells,
are forming that change the properties of materials.
Okay, we're out of time,
so we'll pick up here with the Rydberg formula next time.

