CINEMATIC DAY for NIGHT in PREMIERE PRO

Studio Solution
24 followers
Hey folks, Jordy here for cinecom.net and today is Copy Cat Friday,
where we recreate a popular film technique.
And you've probably seen it before, a scene shot during the day transformed
so that it seems like it was shot during the night.
This technique is called Day-for-Night and it's actually used pretty often.
So let's swing into Premiere Pro and create an advanced Day-for-Night effect ourselves.
The example clip that we'll be working with today comes from Videoblocks,
a huge library with tons of video effects and stock clips.
On a daily basis this library gets updated with fresh new video assets.
Check it out for yourself, you can visit the first link in the description below
and start your 7-day trial for free.
So, we'll turn this shot into a nightscape.
And there's a very big misconception about color grading a night look.
It's not just about making your shot darker and adding blue into it.
No, the first thing you need to work on is the sky.
If we would make the entire shot darker, we still remain a bright sky.
So, what we'll do is create an adjustment layer.
Lay that on top of the clip and draw a mask on it
by using the Pen tool from the Opacity property.
This mask can be very rough and for moving shots you wanna animate it
using the Mask Tracker.
Now, open up the Lumetri Color window
and decrease the exposure with having your adjustment layer selected.
Of course, you wanna increase the feather of the mask
to remove the edge and perhaps also play with the mask expansion
to line up the mask better.
Alright, now we have a proper balanced clip
on which we can do the nightscape grading on.
Select the original clip and from your Lumetri Color window
we'll first decrease the highlights to get rid of the harder sunlight.
Now, let's decrease the exposure for a general darkness.
The image looks pretty flat now, so to bring back that contrast
we'll decrease the shadows and perhaps a little bit of the blacks too,
which is really going to give that punch.
Some of the highlights now are grey,
because we've pushed that exposure down too much.
So, for only the absolute whites we'll bring back that exposure a little bit.
So, that's it for the exposure.
Typical for night scenes is of course that blue color.
Setting the white balance to blue won't give you the best results,
as that will alter the entire shot and make the highlights too saturated.
So, I've came up with a better solution.
Head over to the Curves tab and select the red color on top.
Bring the highlights, which are in the top right, to around 60%.
This way we're decreasing the red color and the highlights.
Do the same thing for the green channel and that will only leave us with the blue,
giving us a great blue color cast that we need for a nightscape.
So, that's it for the color grading.
But if you want to take your night scene to that next level,
you're going to need to create some moonlight.
From the Effects Library I searched for Lighting Effects
and dragged this effect to my clip.
With this effect we can create five digital light sources.
Open up the first light source and make sure it's set to Spotlight.
Position the cone so that the light seems to come from an upper corner
and then set the light color to blue.
And you might want to decrease the intensity a little.
And there's our moonlight.
We could consider this day for a night to be complete now.
But, what if there's somebody home?
Let's turn on the lights for some of these rooms.
From the Lighting Effects I'm going to open up the light source number 2
and set the light side to Omni.
Position the center on a window
and next under the settings of your Lighting Effect
you want to change the color to orange.
This is the warm tungsten lighting inside the room.
Decrease the radius so that it only illuminates a little around the window
and this time you do want to increase the intensity
so that it looks like a natural glow.
And you want to repeat this if you're going to illuminate multiple windows.
Of course, this is only the glow from the lighting inside the room.
So, here's what we're gonna do to turn on the actual lighting inside.
Duplicate the clip to the channel above and delete all the effects from it.
Then take the Pen tool again under Opacity
and drag a mask around the windows from which the glow comes.
For each window you want to create a new mask.
And once that is all done, head into the Lumetri Color panel
and slide the temperature all the way to the right.
Finally, increase the exposure and decrease the saturation a little bit
to make the room lighting more realistic.
And by animating the mask capacity per window
and its allocated glow from the lighting effect's intensity,
you can bring the entire scene to life.
You can let some lights breathe or make the lights turn on.
So, the next time you need to film a night scene but you need to be home at 10,
here's your solution!
Thank you guys so much for watching!
And as always,
stay creative!
Okay guys, I got Frank.
Now we only have to wait till Jordy gets back to introduce him.
I hope he likes him.
He's home. Let's give him his presents.
Meet Frank!
He loves you!
