Cách Làm Sáo Diều | Người Mới Chơi Làm Được Như Thế Này Thôi

Today I'm going to show you how to make a jackfruit seedling with jackfruit wood To be honest, I don't know how to make a jackfruit seedling with jackfruit wood But there's a guy on my channel, his name is Da Nang He has a lot of comments asking me to make a jackfruit seedling with jackfruit wood I haven't done it yet because there's a lot I don't know So I'm not sure if I can do it But today, I see that guy wants me to do it many times So today, I'm going to show you how to make a jackfruit seedling with jackfruit wood I have a bamboo tube with a diameter of 50mm I've already cut it to make it thinner The diameter of the tube is 50mm I've already cut the jackfruit wood I'll show you how to cut it later All you need is a jackfruit wood, a tube, and a bamboo tube I've already cut the wood I'm going to put the tube in I'm going to draw a line I'm going to put the tube in I'm going to cut it big The diameter is 50mm divided into 3 parts and that's 17 strips so I divided it into 3 parts so now I have 2 parts this part here I will use to make the chicken neck and this part here I will make the beak to make the mouth so now let me go and make a beak and I will show you guys after I make the beak then I will pull it After a long time, I sharpened it for a long time, it was like this. It looks like a starfish's mouth. In general, it is not very beautiful because I don't have a machine to sharpen it. I do it by hand. I only use these chisels. The chisels I bought at the market are not professional to sharpen starfish. I also add 2 small pieces of paper. As you can see, it is not smooth inside. I have to use sandpaper to smooth the inside. Professional starfish sharpeners will have a machine to smooth the inside. I don't have a machine to sharpen it, so I use sandpaper to smooth the inside. I use a knife to sharpen the outside. It looks pretty good. I will borrow a chisel later to sharpen it. I will sharpen a lot of chisels. I don't dare to use a lot of chisels because I'm afraid it will damage my starfish. I divided the chisel into 3 parts. One part is for the tongue. The other 2 parts are for the belly of the chisel. I don't know what it's called. Now I will borrow a chisel to sharpen these 2 chisels. I will show you how it looks after I sharpen it. It still looks bad. This is all I can do today. I sharpened 2 chisels. 2 chisels. 2 starfish chisels. It looks pretty good. It's pretty good now. I'm very tired. I don't usually use this kind of machine. So I'm not used to it. The outside looks pretty good. Tomorrow I will use sandpaper to smooth the inside. I will try to use sandpaper to smooth the inside. It will make it easier to sharpen the inside of the chisel. These are the 2 chisels. I'm trying very hard. I don't have the tools. I only have this much. That's all I can do. Tomorrow I will smooth the inside. After I smooth the inside, I will open my mouth. After I open my mouth, I will try to use the chisel. I will see how it sounds. This video is not made by professionals. I don't know anything about chisels. It's just a practice. I hope you will like it. Please don't criticize me. I will end the video now. See you in the next video.