Materialism Podcast BONUS episode en ESPANOL! Magnetron sputtering @TecnoglassyESW
Oct 7, 2023
Bonus episode of the Materialism Podcast recorded in Spanish with guests Diana Gasca and Christian Barbosa of Tecnoglass in Barranquilla Colombia. This episode covers magentron sputtering of thin films onto glass for improved building efficiencies.
Should we do additional episodes in Spanish? Let me know in the comments!
I would like to describe a field in which little has been done, but in which an enormous amount can be done.
This field is not quite the same as the others, in that it will tell us little of fundamental physics,
but it will tell us much about the strange phenomena that occur just below our perception.
In contrast to the natural philosophers of the past, the scientists of this field delve into the recesses of nature and show how she works in her hiding places.
Their quest is to understand and create the imperceptible.
After all, there is plenty of room at the bottom.
I am Diana, I am also a Materials Engineer from the University of El Valle, and I work in the technology evaluation part of the Soft Coatings plant, where we make thin films at an industrial level.
These are glasses for what purpose? Are they for commercial purposes or what are they for?
Well, in reality it is what is called low-emissive glass, and it is basically glass that is used in architectural facades, or in applications that require to repel infrared radiation.
They are glasses for energy efficiency, so they are used in houses, in buildings, and in other applications where it is essential to maintain temperature and prevent heat from entering, or escaping from a enclosure.
And the company makes the glass on top, well, all the things, the glass and also the films that go on top, or only the films?
Well, no, Tecnoglass is a glass processor, currently the glass does come from an associated plant in Bogotá, and it is applied to a low-emissive coating, thin films, multi-layers, low-emissivity.
Ok, great. And how long has the company been in this business?
Tecnoglass has been around for about 34 years, but they got into the world of thin films, or the company has been in this business for 8 years.
Ah, more or less, ok, great. And who do they serve as a company in South America, or where are the people who buy the glass that you make?
90-95% of the production is exported to the United States. Basically, the technical regulations, the legal regulations in the United States require low-emissivity glass for the commercial and residential sectors.
And now we are in a situation where there is a shortage of glass, let's say, of people who supply this glass, and the North American market is very large, because they are building a lot, so we export almost everything we make to the United States.
That's great. And the technology that you have, is it something that you developed there in that company, or is it something else, or how did you make that technology?
I was in charge of a system in which I was able to work, but obtaining the resources in a very complicated way, very, very complicated.
And at the university we had a team that had a single bomb, and it was small, as Cristian says, so the professor fought the resources to be able to have it, and our targets were how many? Like 2 inches?
They were 2 inches in diameter.
and of all the students, I believe that our teacher was the only one who allowed us to touch the equipment and do maintenance and make changes and modifications for each of our jobs and projects.
I mean, when you talk about globalization, it means that resources begin to be distributed where there are investors who have to invest the resources in a place where they are needed, where they have the capacity to develop it.
So, for example, Tecnoblast, Tecnoblast at the time entered Nasdaq and bid on Nasdaq to be able to advance and have resources to access new technologies, and now it is in New York Change.
So, then, let's take into account that the more investment these countries can get, that there is so much need, not only for society, but so much need for growth, well, the developments will begin.
But, as I have always said, if industries, investors and the state change the way they think and start investing in knowledge, there will be development.
We are still a little lonely, but let's say the few professors who came in the 70s and 80s, who returned to the country, sowed their seed and then this line exists because they did that. The change is happening, but it is slow.
Now it is up to us to do as little as we can, however, what Christian says, as long as there is no serious investment and serious cooperation with developed countries, it will continue to be slow.
For one, there are many ways to do it. You said that you use physical vapor deposition for, is it magnetron sputtering that you said? Maybe you can explain how that process occurs.
which look for a place of less energy to deposit, basically to stabilize. So, in this case, a glass is passing under that target, and that is the chosen place to deposit the glass.
So, uniform layers are made, since the target is very large, the magnetic field, the changes in the magnetic field allow them to be deposited uniformly. It's a large array coating.
And we are what they call jumbo coaters.
And the glass is solid? What temperature is the glass?
The power of the target?
Yes, the power of the target, the electric charge, and the composition of the gas. So, we have a gas composition, an electric charge, and a pressure. Usually, in the processes of magneto-transpolines, it is in the order of at least 3 millibars.
You make a layer by PBD, you make a dielectric layer by PBD, and another metallic layer, another dielectric layer.
The target is a metal, what is deposited in the glass is metal oxide, or metal nitrogen. And then it goes to another section of the machine where it is a metal, so it is not a reactive plasma, but a non-reactive plasma, I don't know how to say it.
And then it comes back, and the process is restarted, and it's a whole production line. And the only thing that separates those areas are the pumps that make vacuum. There are no doors between them.
Because if you don't, you're going to have to do, imagine doing pumps, it doesn't make any sense. But yes, they are processes, this type of process, the vacuum, you can keep it if you organize a multi-camera system well.
and then the next area with another pressure. I mean, if it is possible, mechanically it is possible.
But as I was saying, there are no doors between them, there are only many molecular pumps removing the excess from the other material.
Yes, yes, yes, all the time. However, they are very standard solutions. I mean, wash well. Wash well. I think the most important thing is to wash well in the end.
None of the fingers or anything, all clean.
You can't touch anything because it looks ...
Wash well, don't touch anything, clean well, don't touch.
That's super complicated, I think for us, what are we?
You forgot to touch the glass.
No, I know, I know.
You do everything to work with people who are not used to these systems.
Because they see it, they don't say anything, well, it looks good, they don't know what it is, a little oil, nothing more, what are the problems?
So, oh, but engineer, you say, that's your invention, that you touch the glass and then you see it. No, it's my invention, I've seen it, I've seen it.
Ok, so you produce that glass with acetates. Do you characterize it yourself there or do you send it somewhere else or what happens?
Well, yes, currently, characterization industrial equipment that is used here is something quite reserved.
However, something common in all video industries is colorimetry.
Ensuring that today's production is the same as tomorrow, the same as the next year, the same as the next ten years.
And being by the sea, is that a problem?
I was in Santa Barbara, we had that problem, we had a clean room, and it always changed with the climate of the sea, how it came, the little things changed.
It was more difficult than I thought to keep everything the same.
Well, fortunately, fortunately, fortunately, the humidity in Barranquilla is always 98.
Wow, terrible.
And the temperature is always 40, 38, so it wouldn't be much.
Nothing changed then, well, that's good.
It's always the worst possible weather.
But yes, the goal is always to keep the rooms clean and the air conditioning systems in the system,
and especially the cooling of the systems that are used to keep the temperature constant.
That is, the external temperature of the machine, because as there is so much energy there, the equipment cannot rise in temperature.
And when maintenance is done, the humidity must also be controlled a lot, because then it is a mess to lower the pressure to where it has to be lowered.
If during maintenance it was open and exposed to humidity, then yes, we have a suitable dam, as best as possible.
But if it is very careful.
So the calorimetry, spectroscopy, to see if it is like, what is happening to it with the light that comes in and out.
But also from the mechanics, you have to find out how thick the stage is and if it sticks well, if there are cracks between the levels.
You have to find out this.
Well, let's remember the HTM, I don't remember very well.
It's an ISO.
A normal ISO.
It's not an HTM.
ISO test for lenses.
ISO for lenses.
You have to use a cloth and rub a number of strokes on the surface.
Basically, they are basic types of test mechanics that are used for this type of technology.
It's called soft coat for a reason.
Remember that they are dielectric layers, metallic, dielectric, metallic.
They are usually nitrous oxides, nitrous metals, nitrous oxides, nitrous metals.
So they are very soft layers.
After being produced, they have to be barely looked at and treated with great care.
Because they can be scratched or corroded very easily.
Speaking of lamination and adhesion, fortunately, that ISO made it much easier to verify.
It's not like we have to have a trident to measure the wear.
It's much easier.
They have done it to the extent that a plant operator can do it.
And what Christian says is that you have to rub it with a wet cloth on the surface a certain number of times.
And that is so standardized that you don't know if the person is doing it well or not.
I mean, with the right force, because of the sound.
If it doesn't sound when it's being done in a certain way, it's doing a bad test.
Interesting.
So the test is so rigorous, so strong, that if the coating is not removed with that, if it is not completely removed,
it is because it must resist the service time that is scheduled for the window.
Ok, last question from me.
Looking to the future, what are you going to do?
If you have any resources that you need, would you invest in new technology to increase the capacity of these covers?
Or would you invest in ways to make it cheaper, or both? What would you like to do?
Well, first of all, to meet the needs of the architects and the client.
Better specifications of glass and more beautiful.
And I would also vote to make it simpler.
And simpler, because it is very complicated.
Yes, for you, it is not only difficult to transfer this knowledge to others,
because they are very abstract concepts.
The vacuum, the millbar, the shimming, the trimming, I don't know what.
So there are a lot of terms that people who are not familiar with this, it is difficult to convince them.
But also to diagnose phenomena or anomalies at a nano level.
It is difficult when they occur in, I don't know, how to track them more easily and find the problems faster.
To solve them faster, to make it more affordable.
And also so that the wear and tear of the person who is the process engineer is not so high.
Because you have to think a lot.
They are very complex machines.
So I would vote to make it easier.
I imagine that easier also means cheaper, faster and more profitable.
Is there anything else you want to say to the people who can hear this?
Not much more.
Thank you very much for the invitation.
In Latin America there is a lot of talent.
Starting with the target of the United States, the Anglo-speaking nations.
In Latin America there is a lot, a lot of talent.
And there are many engineers, many doctors, many researchers who are willing to go and do new processes.
To apply new processes.
To participate in interesting projects.
And it is a very attractive area to invest in.
For new projects.
For development projects.
Maybe microchips.
Maybe hard disks.
Maybe...
I don't know.
There are so many applications that need so much specific science.
That there is knowledge in Latin America to execute them.
And to execute them successfully.
I totally agree.
There is an opportunity there for sure.
And people still don't know it.
To their loss.
Because there really is an opportunity there.
That's good.
Well, I loved talking to you.
Thank you for being on the show.
Even if it's a short one.
And maybe in the future we'll do another one.
We'll see if people...
Well, I don't know where the audience is.
If they want to listen in Spanish or not.
But we'll find out.
Yes, of course.
We'll have another opportunity.
There is no podcast similar to Materialism in Spanish.
No, I have no idea about that.
Well, it's been a pleasure.
Have a good night.
And until next time, Sarah.
Thank you.
It was a pleasure.
Have a good day.
Bye.
The inventors of fire, electricity, magnetism, iron, lead, glass, silk, cotton...
The makers of tools, the captors of lightning, the architect, the engineer, the musician...
Are all beneficiaries of the materials of this world.
And are bound only by their imaginations in manipulating those materials.

