Basic Electronics for KTU students(EST-130)- Frequency Modulation
Oct 7, 2023
module 6
BASIC ELECTRONICS: https://www.youtube.com/playlist?list=PL2UV2EJdMQmjKsQm-dKy2Dr42PWiTzx4U
Good morning all.
The last thing we discussed in college was modulation.
System Modulation or Radio Communication is modulation.
What is modulation?
What are the needs of modulation?
And then modulation.
We have taught so much in class.
We conducted all the testing in class.
We asked you questions.
I think you remember everything.
Today we are going to learn about Frequency Modulation.
We will learn what modulation is and then we will go into Frequency Modulation.
If you have forgotten, please remember.
What is modulation?
It is the amplitude, frequency or phase of a carrier signal.
If it varies according to the message signal, then it is modulation.
According to the amplitude of the message signal,
modulation is the amplitude, frequency or phase of the carrier signal.
Do you remember?
We learned amplitude modulation.
What is the amplitude of a carrier signal?
It is the amplitude of the carrier signal.
Why does it vary?
It varies according to the message signal.
Remember that it varies according to the carrier signal.
Why does it vary?
It varies according to the message signal.
What is Frequency Modulation?
Let me tell you.
The frequency of a carrier wave
is varied instantaneous amplitude of the message signal.
The frequency of a carrier wave is varied in accordance with the instantaneous amplitude of the message signal.
That is what we call Frequency Modulation.
Frequency Modulation is the process in which the frequency of the carrier signal varies according to the message signal.
Let us look at the equation of Frequency Modulation.
What we have to pay attention to here is
why this variation occurs in Frequency Modulation.
The variation occurs only in the frequency of the carrier signal.
There is no variation in amplitude and phase.
We have to study the equation of Frequency Modulated Wave.
We do not need derivation to study it without seeing it.
Since it is a Frequency Modulated Wave, we have EFM.
EFM is a Frequency Modulated Wave.
EFM is equal to
E C sin of omega C T plus M F sin omega M T
This is the equation of Frequency Modulated Signal that we get after the modulation.
The equation of Frequency Modulated Signal is
EFM is equal to E C sin of omega C T plus M F sin omega M T.
EFM stands for Instantaneous Amplitude of FM Signal.
EFM is the instantaneous amplitude of FM Signal.
Omega C stands for Carrier Frequency.
E C stands for Maximum Amplitude of FM Signal.
You may ask that E C stands for Amplitude of Carrier Signal.
Both are the same.
Why?
There is no variation in the amplitude and phase of the carrier signal.
Why does this variation occur?
Variation occurs only in the frequency.
E C stands for Carrier Maximum Amplitude.
It is the maximum amplitude of FM Signal.
Omega M stands for Modulating Frequency.
M F stands for Modulation Index.
This is the equation of Frequency Modulated Signal that we get after the modulation.
EFM is equal to E C sin of omega C T plus M F sin omega M T.
EFM stands for Instantaneous Amplitude of FM Signal.
Omega C stands for Carrier Frequency.
E C stands for Maximum Amplitude of FM Signal.
Omega M stands for Modulating Frequency.
M F stands for Modulation Index.
Now let us see how modulation occurs.
First I am going to draw the carrier signal.
I am going to draw the carrier signal as I did in the EM case.
The first two are the same.
The first one is the carrier signal.
I am going to draw the carrier signal as I did in the EM case.
The carrier signal is the same amplitude.
The frequency should be the same.
This is the carrier wave that we just drew.
The amplitude modulation and the input are the same.
The carrier signal and the message signal are the same.
You just have to draw the two in the same way.
Now I am going to draw the message that we are going to send.
This is the message signal.
How do I denote the message signal?
I denote it using the small e m.
Now the next signal that we get after the modulation is the modulated signal.
The modulated signal is the frequency of the carrier signal.
Now the amplitude of this message is less.
As we move the carrier signal, it increases.
The maximum amplitude of the carrier signal increases.
As we move the carrier signal, it increases.
You can see that the amplitude is decreasing.
Here, the amplitude is decreasing.
Here, the amplitude is going to negative.
Here, the amplitude is at the minimum.
When you draw the modulated signal,
what you have to pay attention to is
the frequency of the carrier should be according to the message signal.
When we studied amplitude modulation,
we changed the amplitude of the carrier according to the message signal.
Here, we have to pay attention to the frequency of the carrier.
When we draw here,
we have to draw everything at the same amplitude.
Here, at this point, what do we get?
Maximum frequency.
Here, the frequency is reduced.
Then, the frequency is increased.
When the frequency is increased, we can draw nearer and nearer.
Here, it is increased a little more.
Here, it is maximum frequency.
Then, when you draw, it reduces.
So, when it reaches here,
the frequency of the carrier signal is minimized.
Now, we have to show that the frequency is decreasing.
See, it is decreasing.
When it reaches here,
see, it is decreasing a little more.
When it reaches here,
the frequency is minimized.
Then, what is the frequency?
The amplitude should be the same everywhere.
Here, see,
what you have to pay attention to is
when you draw the carrier,
the frequency of the carrier should be
When it reaches the maximum,
draw nearer and nearer.
Draw nearer and nearer to the carrier signal.
If you draw nearer and nearer,
then the frequency will be increased.
When it reaches the minimum,
draw nearer and nearer to the carrier signal.
Then, the frequency will be reduced.
Then, see,
we can call this fm.
The frequency of the carrier signal
depends on
the carrier signal.
This is what we call
frequency modulation.
This is all you have to pay attention to.
When you draw the frequency of the carrier,
draw nearer and nearer to the carrier signal
when the amplitude reaches the maximum.
Draw nearer and nearer to the carrier signal
when the amplitude reaches the minimum.
I will be sending you the detailed notes.
You can clarify the figure in the notes.
This is the frequency modulated signal.
Did you understand?
I think everyone understood the frequency modulation.
In this,
as we learned in AME,
MF is the modulation index.
Let us define what the modulation index is.
MF is the ratio of
maximum frequency deviation to
modulating frequency.
The ratio of maximum frequency deviation
to modulating frequency
is called the modulation index.
What is the ratio?
Maximum frequency deviation
to modulating frequency
which is equal to
delta F divided by FM.
The modulation index is
the ratio of maximum frequency deviation
to modulating frequency.
In the case of FM,
there is a bandwidth.
The bandwidth is
2 into delta F plus FM.
This is the bandwidth equation
in the case of FM frequency modulation.
Next,
let us see the block diagram
of FM receiver.
This is the super heterodyne structure
of FM receiver.
In the case of AM,
we learned the super heterodyne structure
of AM receiver.
Similarly,
let us learn the super heterodyne structure
of FM receiver.
First,
let us draw the antenna.
After drawing the block diagram,
we can explain more about it.
This is the antenna.
This is the radio frequency amplifier.
This is the mixer.
This is the local oscillator.
This is the intermediate frequency amplifier.
This is the limiter.
This is the discriminator.
This is the limiter.
This is the discriminator.
This is the same as we learned earlier.
This is the variation.
This is the de-emphasis.
This is the circuit.
This is the audio amplifier.
This is the power amplifier.
Lastly,
let us draw a loudspeaker.
This is the block diagram of an FM receiver.
Do not forget to draw the arrow.
This is very important.
This is the basic block diagram of an FM receiver.
Let us look at each one of these.
First, let us look at the radio frequency amplifier.
Radio frequency amplifier is used to select tuned frequencies and reject other frequencies.
It also amplifies the incoming weak signal and provides a matching media to match between antenna and receiver stage.
There are different types of FM signals like 93.5 and 94.3.
If you want 93.5, you can only get that.
If you want all other signals, you will not get anything.
This is the purpose of radio frequency amplifier.
If you have tuned the signal to 93.5, it amplifies the signal to 93.5.
It amplifies only the tuned signal and rejects all other signals.
Let us look at the mixer stage.
It is a heterodyning stage.
It is used to mix the received RF signal.
RF stage, mixer, and local oscillator are interconnected to tune the signal simultaneously.
This is what we learned in the AM receiver.
The output of the mixer is the difference between the RF signal and the signal coming from the local oscillator.
The signal coming from the mixer is called the intermediate frequency signal or IF signal.
The frequency signal is constant.
The value of the IF signal is 10.7 MHz.
The IF signal is sent to an IF amplifier.
IF amplifier is an intermediate frequency amplifier.
The IF signal is sent to a detector circuit.
The detector circuit is composed of a limiter, discriminator, and de-emphasis circuit.
The detector detects and recovers the original modulating information.
The audio signal is sent to the power amplifier by limiting the amplitude of the limiter.
The discriminator and de-emphasis circuit are used to remove the original modulating information.
The audio signal is sent to the FM signal.
The FM signal is amplified and sent to the loudspeaker.
This is the basic block diagram.
This is the RF radio frequency amplifier.
The RF radio frequency amplifier is used for tuning purposes.
The RF radio frequency amplifier is used to tune the desired signal frequency from the antenna.
The mixer is a local oscillator.
The mixer is an interconnected heterodyning type.
The mixer is used to output the difference between the radio frequency signal and the signal generated by the local oscillator.
The mixed signal is the intermediate frequency signal.
The intermediate frequency signal is sent to the IF amplifier.
The detector circuit is used to remove the FM signal from the IF amplifier.
The FM signal is used to remove the FM signal from the FM system.
The limiter and discriminator are used to remove the FM signal.
This is the block diagram of the FM receiver.
Let's see the performance characteristics of a radio receiver.
The first one is selectivity.
Selectivity is the ability to select the desired signal and reject unwanted signals.
Selectivity is the ability of a radio receiver to select the desired signal and reject unwanted signals.
The next one is sensitivity.
Sensitivity is the ability of a receiver to respond to weak signals.
The next one is fidelity.
Fidelity is the ability to reproduce faithfully all audio frequencies.
Let's see the comparison between AM and FM.
Let's first talk about the definition of AM and FM.
The definition is the amplitude of the carrier wave changes in accordance with the instantaneous amplitude of the modulating signal.
This is what we call AM.
The amplitude of the carrier wave varies according to the amplitude of the modulating signal.
The frequency of the carrier wave varies according to the amplitude of the message signal.
This is what we call frequency modulation.
The frequency of the carrier wave changes in accordance with the instantaneous amplitude of the modulating signal.
In the case of AM and FM, we talked about the modulation index.
There is a difference in the modulation index.
In the case of AM, the modulation index value is between 0 and 1.
Modulation index is always between 0 and 1.
In the case of FM, the modulation index value is always greater than 1.
In the case of AM, the modulation index value is between 0 and 1.
In the case of FM, the value is greater than 1.
Next, let's see the transmitted power.
In the case of AM, the transmitted power is dependent upon the modulation index.
In the case of FM, the transmitted power is independent of the modulation index.
The power is not dependent on the modulation index.
The amplitude is constant in the case of FM.
The transmitted power is also constant.
So, the transmitted power in the case of FM is independent of the modulation index.
Now, the demodulating circuit.
In the case of AM, the demodulation circuit is easy.
In the case of FM, the demodulation circuit is a bit difficult.
The next difference is the bandwidth.
In the case of AM, the bandwidth is equal to 2 times FM.
The bandwidth is twice the modulating frequency.
In the case of AM, the bandwidth is independent of the modulation index.
In the case of FM, the bandwidth is proportional to the modulation index.
In the case of AM, the area covered by AM is more.
Similarly, the area covered by FM is less.
As you know, the area covered by AM is more and the area covered by FM is less.
This is the comparison between AM and FM.
The amplitude of the carrier wave varies according to the MSI signal.
The frequency of the carrier wave varies according to the MSI signal.
In the case of AM, the modulation index is greater than 1 in the case of FM.
The transmitted power depends on the modulation index.
In the case of FM, the amplitude is constant.
The transmitted power is constant and independent of the modulation index.
In the case of AM, demodulation is easy.
In the case of FM, demodulation is difficult.
In the case of AM, the bandwidth is 2 times the bandwidth of FM.
In the case of AM, the bandwidth is proportional to the modulation index.
In the case of FM, the area of reception is greater.
In the case of FM, the area of reception is smaller.
Now let's look at the advantages of FM.
FM is more efficient.
There will be less noise.
There will be less channel interference.
In the case of FM, all transmitted power is useful.
In the case of FM, bandwidth requirement is much higher than that of AM.
FM transmitting and receiving equipment are complex.
it is a little more complex
now let us look at the intermediate frequency
after the local oscillator
we generate an intermediate frequency signal
that is, the heterodyne structure
AM and FM are generated by an intermediate frequency signal
in the case of AM
the frequency of the intermediate signal is
455 kHz
in the case of FM
the frequency is 10.7 MHz
that is the signal frequency
this is what we need to learn in frequency modulation
first we defined what frequency modulation is
then we studied the frequency modulation equation
then what is frequency modulation
carrier signal, message signal
frequency modulated signal
that is, the amplitude is increased and the signal is decreased
that is, the frequency is decreased
and the signal frequency is increased
then we studied the modulation index
modulation index is the ratio of maximum frequency deviation
to modulating frequency
then we studied the bandwidth equation
bandwidth equation is 2 into delta f plus fm
then we studied the block diagram
block diagram of FM receiver
performance characteristics
selectivity
selectivity is tunability
sensitivity and fidelity are the performance characteristics
then we studied the comparison between AM and FM
then we studied the advantages and disadvantages of FM
intermediate frequency of AM and FM
this is all in the topic of radiocommunications
these are the portions made in syllabus
THANK YOU

