We partnered with the CalNano to revisit Spark Plasma Sintering. How has the industry changed since we last discussed it? What is CalNano doing specifically to fuel that change? Take a listen and find out.
This episode is sponsored by Materials Today, an Elsevier community dedicated to the creation and sharing of materials science knowledge and experience through their peer-reviewed journals, academic conferences, educational webinars, and more. https://www.materialstoday.com/
Thanks to Kolobyte and Alphabot for letting us use their music in the show!
Materialism Team: Taylor Sparks (co-creator,co-host), Andrew Falkowski (co-creator,co-host) Jared Duffy (production, marketing, and editing), Ramsey Issa(editing assistance).
Keywords: Spark Plasma Sintering, SPS
I would like to describe a field in which little has been done, but in which an enormous amount can be done.
This field is not quite the same as the others, in that it will tell us little of fundamental physics,
but it will tell us much about the strange phenomena that occur just below our perception.
In contrast to the natural philosophers of the past,
the scientists of this field delve into the recesses of nature and show how she works in her hiding places.
Their quest is to understand and create the imperceptible.
After all, there is plenty of room at the bottom.
Hello and welcome to the Materialism Podcast,
an exploration of the past, present, and future of material science and engineering.
My name is Andrew Falkowski, and I'm joined as always by my co-host Taylor Sparks,
and this time by Eric Eiermann, the CEO of Calnano.
Eric, would you like to introduce yourself?
Yeah, thanks. Thanks, guys. Thanks for having me on.
It's a great opportunity.
I'm happy to be here to talk about SPS and some of the other stuff that we're doing.
So, yeah, I'm the CEO of, like I said, Calnano, or California Nanotechnologies.
You know, we're a company that does SPS, basically everything you can think of,
toll services, equipment, tooling, and even simulation software.
Myself, I have a chemical engineering background,
and, yeah, started out Calnano as an intern, and I've worked my way up now to CEO.
So that's pretty awesome, from intern to CEO. You don't hear about that every day.
It's kind of interesting, me, through this episode,
because a lot of companies reach out to us and they say,
hey, your audience might be interested in this technology or whatever,
but this episode's kind of the other way around.
I've been using your company as a service in my role as an academic
for quite a bit longer than even the podcast has been around.
So we are delighted that we could make this episode work.
Now, if folks haven't listened to our previous episode on so-called spark plasma sintering,
that's episode number 35.
Maybe pause this, go listen to that, and then come back to this,
because today's episode is, you know, it's building on what we did,
what we talked about last time.
So Eric was obviously, he's a listener to the podcast, which we think is fantastic,
and he reached out to us and said, hey, there's been some cool advances
in moving this technology out of the research space,
where they're testing and proof-of-concepting it,
into actual industry, and let us know about some really cool technologies
that have been happening since then.
So Eric, you know, in your discussions with me,
we talked about things like ultra-fast high-temperature sintering,
we talked about degas mode, fast cooling mode,
different shapes, different waveforms,
the size and shape of these things getting absolutely wild,
maybe even bringing costs down.
So we would love to get into all of these topics and more with you
on today's episode.
Yeah, that's going to be great.
There's a lot of new innovations that are happening now in the space,
and it's going to be great to discuss all of them here.
So what's something that you are most excited about
in the field of electric field-assisted sintering?
I would say the size and the scale-up.
That's probably the most exciting for me,
just because it has been traditionally used and seen as an academic tool.
And now to see companies using it to make parts
that are up to 2 feet in diameter, large plates,
and now even exploring making tall billets,
and then on top of that, complex shapes.
That sort of stuff is really exciting,
and I think it's really going to push the technology forward
into a lot of different applications.
Yeah, so one of the times I learned about this
was on a grant from Idaho National Labs,
where we were helping fabricate some of their materials.
And these were high-entropy alloys,
and they said that they wanted to test them at large sizes.
And I assumed that meant like, oh, maybe they're going to go like an inch or two.
And we had you guys making for us,
god, what were they, 80-millimeter tall and 80-millimeter diameter pucks?
That's big. That's like a coffee mug big.
Like these were way bigger than anything I'd ever made before,
and that sort of shocked me.
So now for you to tell me that actually there are tools out there
that can go up to half a meter, right, is absolutely mind-boggling.
Yeah, yeah, it's really exciting.
Yeah, yeah, I remember us making those parts.
Yeah, and that was pretty cool with the high-entropy alloys,
being able to make those parts that size.
And even our system can go up to about 150 millimeters in diameter or so.
So then to look at the other people like Idaho National Lab now
who has the machines that are making 600 millimeters of size
is kind of, it's almost mind-boggling, but it's really great.
And it's a big deal too, right,
because it's one thing to just be able to make this material
with getting close to its theoretical density
and having these great properties in terms of its microstructure.
But if you can only make these small little pucks
that are only good for characterization,
maybe micro-hardness testing or something like that,
it doesn't really do any good from an industry perspective.
And so actually being able to achieve things of greater size
starts to bring it into the realm of possibility
and into potential applications where those properties can be harnessed.
So one question I have with this,
I think back to when I was an intern way like 20 years ago,
I was working at Ceramatech.
And I remember for, I don't remember what application it was,
but they wanted to make this ceramic rod that was an inch in diameter.
And I think it was nine inches long.
And we, you know, obviously the right thing to do is to isostatically press that.
But for some reason they were like,
hey, just try and uniaxially press that.
And I tried and like we went to, I don't know,
what a typical like 100 MPa or something.
And we go to unload this thing and it's like pure powder inside.
Like it is not compressed at all.
And now obviously I take my ceramic engineering courses
and I learn about the die wall friction
and how this is going to then reduce the pressure,
the compaction pressure of the stuff in the middle of your die dramatically.
How are we not getting those same sorts of problems
as you scale up to really big components?
Or is it the case that there's really big heterogeneity in those components?
Yeah, so there's definitely,
you're definitely still seeing those issues when you're getting too tall.
So when you get that aspect ratio
where that height is really getting up there,
you're still seeing those same things.
I mean, a few of the things that we've done
is basically be able to control your thermal gradient.
So you're getting the center to be able to densify
or whichever kind of part of the longer piece that you're trying to densify.
Get that to one part to densify sooner, get that hotter,
and then everything else can kind of center around that.
So that's kind of one of the ways
that we've been able to mitigate some of that stuff.
But talking for that kind of aspect ratio,
one inch to nine inch, that's still definitely a challenge.
To be fair, it was a really bad idea at the time.
I think it still is a bad idea.
But that was an illuminating moment for me to realize
that the geometries are not all possible
because of things like that wall friction.
So tell us about Kel Nano.
How did you guys get involved in this space?
So have you always been a sintering company
or did you do something else and then move to this?
So yeah, it's a funny story.
I mean, about over a decade ago,
we just kind of stumbled into sintering into SPS technology.
So we're producing a nanocrystalline material
with one of our other technologies, cryogenic milling.
Basically a process, you're taking powder
and you're making nanomaterial.
It could be particle size
or it could be actual nanograined crystalline.
And we needed a way to consolidate it
without compromising the microstructure.
And so we found SPS.
It was an effective tool to do that.
And so we bought an R&D system.
It wasn't really until 2016, 2017
that we got really all in on SPS.
And that's when we bought our big system that we have now
that we've done work with you on.
And like I mentioned,
that goes up to about 150 millimeters diameter.
And yeah, from there,
we've just continued to grow the business,
grow out the network of customers,
a lot of R&D work.
And really now our goal is to transition
a lot of this R&D work that we're doing
into manufacturing,
into commercializing the technology
in all the different industries that we're working in.
That is super cool.
So in our discussions,
you've told us that they're actually
not only getting towards the larger,
but you've also mentioned
that they're starting to move towards other shapes,
even maybe net shaping.
How on earth do you do that?
Because anybody, I'm guessing,
who's done SPS has been a cylindrical die.
You wrap it with the foil.
Maybe you put the foil on the top and bottom.
You've got a sort of penny shaped sample.
How do you do anything other than that?
Yeah, well, that's definitely the standard.
And that's what you primarily work with,
especially in anything that's research
or you're making test samples.
But when you go to more complex shapes,
first thing you could do is tooling.
So making, basically getting your tooling CNC'd
or specialty made where you can get dome shapes,
you can get lenses, you can get tubes,
that sort of thing.
As you get more complex,
there's new techniques happening now
where they're combining a 3D printing
or binder printing, binder jet printing process
where you can make either an inverse mold
and then you put that in, you load powder around it.
There's methods where you're basically putting in powder
and then you're putting in some sort of sacrificial layer
or like a separation layer in between
and then powder goes in and then one side's
just kind of your excess stuff
and the other side is your actual part.
And so there's a lot of work being done in that area.
Still definitely on the developmental side,
but it's promising.
These aren't trivial shapes either.
I think you sent an article by
the University of Toulouse in France by Charles Meunier
and they demonstrate that they're able to use SPS
not only to just fabricate things like spheres
or sort of polygons and shapes
with lots of different edges and contours,
but they even go so far as to manufacture
a complete turbine blade using a single SPS.
And so that's a non-trivial geometry to press in an SPS.
And so it's pretty impressive
what they're able to actually achieve now
in terms of shape complexity
with even somewhat rudimentary and simple methods
as just using sacrificial molds.
Yeah, and actually one of those blades
was actually done here at Calnano.
So he came, Charles, he came to Calnano
and we did it in our larger SPS system
and I remember him taking it out.
So you're basically just, what's going in
is you're centering a normal kind of,
it looks like a just normal cylindrical part
and then you take it out.
And I remember him like banging on the part
basically to break off the sacrificial part of it
to then what removes, what comes out
is the final net shape turbine blade.
So that was definitely an interesting thing to see
but it worked, it worked really well.
And how do you separate the sacrificial
from the part you're actually interested in densifying, right?
You can put some sort of sacrificial form in there
but is there some sort of interlayer
between the part of interest and the sacrificed or mold?
It depends.
I think they've come up with a few different methods.
I think they're kind of proprietary at this point.
I know that obviously there's different methods
that we use now for kind of interface layers
like foil or boron nitride
or those types of kind of lubricant separation layers.
But that's kind of what it is.
It has to be a thin piece that is going to allow you
to take apart those things.
And like I said, even with that,
it still had to be broken apart essentially.
So presumably you could use a lot of the same techniques
that they have used for hot pressing of complex shapes.
The only thing that comes to mind of concern is
here you have to have electrical conductivity.
Are you just getting that through the dye
or is there an attempt to try and influence net shaping
with respect to conductivity of the powder itself?
It's definitely a combination of both.
The first thing you want to try, yeah,
is just using a kind of things that are done in hot pressing
and regardless of conductivity,
you just get the heating through the mold
and you still have the advantages of really high heating rates
and electric field that's being generated,
all that sort of stuff.
But yeah, as the kind of things continue developing,
that's definitely something that needs to be,
that's going to be kind of worked on and looked at
is how to keep that benefit of being able to conduct,
when you're using conductive powder,
to get that current going through the entire thing.
So one of the innovations that I've become familiar with
is the ability to degas mid-process
or shortly after the process.
What's really the motivation behind that?
The idea there is for powder purity.
So if you have any type of material that is,
I'm sure you guys have seen in the SPS process
when you're starting to ramp up,
you're seeing that outgassing,
that vacuum spike during the heating process.
And the idea with the degas is to be able to do that,
to heat up your material,
then be able to remove that punch, that top punch,
which then allows for the kind of maximum amount of outgassing,
of purifying your powder,
and then go back to your full sintering cycle.
Is it hard to get that?
You know, when I've done this,
you take a lot of care when you're lining it up initially,
it's got to be just so, lined up just right.
Now you're saying you're going to actually back that punch out
and then you're going to reinsert it.
Do you run into crack dies or misalignment issues by doing that?
It's definitely possible.
It's definitely something that you have to really take care to,
to make sure you're all properly aligned.
But if done well,
and you set yourself up, you're tooling up right,
then it can work really well.
So is this a new technique that your companies are...
Well, first off, maybe I should back up and say,
are you guys selling machines
or are you selling a service with machines made by other people?
Where do you guys fit in this dynamic?
Sure. So we represent a company,
their name is Suga,
and they're a Japanese SPS manufacturer,
have some of the best people there,
kind of some of the originals that developed,
like the big tunnel type systems over in Japan,
have decades of SPS experience.
And so we are their North American distributor.
And so we essentially sell machines here in North America for them.
So that's our business in terms of on the machine side.
And then obviously our other business is toll services.
Like we've mentioned there that we take material from customers
and we will center it for them using SPS.
Okay. So what any other...
So obviously one advantage of degas is you get rid of impurities.
Are there any other advantages to that mode?
And is that novel?
Has that not been around for a while or is this a new thing?
This is a new one.
Yeah, this is a new development from Suga on their lab scale systems.
And yeah, I think the difference is being able to have it
where you can take out kind of institute during the centering process
and then insert it back in.
So to do that, the top punch must be fastened in some way to the upper piston.
How are you doing that?
Yeah, so it's mounted.
Yeah, so it's mounted up to the spacer above it,
typically with something like bolts, graphite bolts, that sort of thing.
So another innovation I've seen out of your flyers is this idea of fast cooling mode.
That definitely captures my attention because everyone talks like,
oh, SPS or it's so amazing you can center materials in five minutes or in 10 minutes,
but there's this huge but it still takes like two hours for the thing to cool down.
And even then you're taking it out at such a high temperature,
sometimes it's oxidizing, right?
And that's with like water cooling running down through the pistons and the ramrods.
So how on earth are you guys doing fast cooling mode?
So it's basically where you're taking usually inert gas
and you're basically blowing it directly onto the mold or onto the punches or any combination of that.
And blowing that cold gas is what is allowing you to kind of enhance the cool down rate.
So it's nothing as fast as say like a quench or anything to that extent,
but it does have a kind of can have an appreciable benefit in terms of the cool down rate.
Some ballpark numbers for us.
So in the past when I've gone to say 1200 C, it might be one or two hours with a coffee mug size die.
With this cooling, what sort of things could we expect to see?
Somewhere around half that.
Yeah, that's way cool.
And it really depends on the exact geometry of the die.
And obviously there's factors in terms of how fast you can actually cool it.
Is your sample going to crack?
There's all those things to take into account.
And there's huge benefits to cooling faster, right?
I mean that residual heat is going to contribute to grain growth,
which can offset a lot of the properties that are desirable in SPS, right?
If you can achieve nano-grained materials early on, but then during the cool down cycle,
those grow to be a little bit bigger, that's not ideal.
And so being able to cool faster makes a lot of sense there.
And gives it certainly an advantage over maybe hot pressing, which doesn't cool down nearly as fast.
Yeah, exactly.
And then same thing for hot pressing.
Comparing it there, obviously the heat up rates play a factor.
So definitely has an advantage when it comes to keeping that nanocrystalline structure.
I suppose another way to cool things down faster is just to reduce the amount of mass in your die.
Of course, as you move to thinner and thinner walls, then it gets weaker.
And these things are already breaking pretty regularly.
But I guess you could use stronger materials.
I know there's die materials, silicon carbide and others.
I'd be curious to see what impact that has on the ability to cool things even faster
is using just less thermal mass, right, around the component.
Oh, yeah.
Yeah, there's definitely been developments in terms of different toolings.
And obviously the tooling that is going to have the kind of want to expel heat the most
is going to be the one that's going to cool down the fastest.
Are there surface treatments you can do to these?
So essentially what you're doing with blowing gas is you're adding convection
to what used to be a conduction problem, right?
Are there surface treatments?
So this is the, I'm a material scientist and not a mechanical engineer,
or maybe I would know the answer to this.
But are there also surface treatments you could do to sort of maximize the way that
blowing this gas on it pulls heat off of these things?
Yeah, yeah.
I mean, there's ways basically of, you know, kind of aiming the gas
and how you have to determine how fast you want to kind of pressurize it.
And, you know, like I said, exactly where it's aimed, the angle, that sort of thing.
So that's all, you know, there's a basic way that you're just basically just,
you know, getting gas on there and that's going to speed it up.
And then as we kind of continue to work on the process, you know,
we'll figure out what's going to be the most effective.
So what role has modeling played in, you know,
determining how you're going to optimize these things
or improving your understanding of certain processing conditions,
whether that's just in fast cooling alone or maybe in just the design
or operation of these systems in general?
So we've only kind of, I'd say, dabbled in modeling.
We now really haven't had the personnel in place to do a lot of work
in, say, COMSOL to make our own thermal modeling.
But we have now teamed up with a company called Ingemini over in France,
and they've made a really simple-to-use kind of thermal model.
You know, you can see thermal gradients.
You can see tooling stresses.
But that's definitely going to be a big component now
on how you can determine what's happening in your system.
An example I like to give is we had a boron carbide project we were working on,
and we were getting to a temperature, and we kept melting out,
and we just had no idea why.
And so then we ran it through the simulation,
and we saw that actually at the center of what, you know, we were reading.
Obviously, you guys know we're reading at the die wall, you know, just inside.
And what we're getting at the center was actually just above melting.
And when we brought that temperature down just 25 degrees,
all of a sudden, no melting, everything was great.
And then the simulation showed exactly that.
And so kind of that's how we're looking to use the simulation software
to give us a better indication of, you know, how to do those sort of things.
That's huge because so much of it is just trial and error.
When I've used these tools in the past, it's like, ah, we had a ton of flash.
I'm going to go a little bit lower.
It's a huge pain, especially if it took a lot of effort to synthesize the powders to start with.
You can't just, like, blow through 20 grams with trial runs.
So being able to simulate that is pretty awesome.
Yeah, yeah, and that's the whole idea.
And with this tool, it's really cool because it's so simple to use.
I know that I've talked to other people, like, you know, kind of in your position in the past
using COMSOL, it's real hard to set up.
And you have to have someone that knows the software
and be able to set up design of experiments and all that.
With this one, I mean, you can set it up and you can set up your experiment in a few minutes
and you let it go.
And then boom, pops out your kind of nice diagram of thermal gradients
and, you know, all that tooling pressures and all that stuff.
So another thing listed in your brochure had to do with selectable waveforms.
I'm a little more skeptical about this, and I'm curious what you think
are some of the big advantages that come from tunable waveforms.
So in our last episode, we talked about whether or not, you know,
electromigration or anything of that nature is really playing a prominent role.
So when it comes to waveform, what sort of advantages do you see
with a tunable electrical waveform?
I really see it as a great kind of research tool and exploring that area more,
you know, because obviously people have explored the pulse versus DC,
and that's had some effect on materials, certain materials,
but not too much, only very specific materials.
But then the other wave, you know, like a full waveform,
that really hasn't been explored as much.
So I think it's going to be very interesting to certain researchers
to see what kind of effect that has on their material and material properties,
you know, electrical properties, that sort of thing.
So in other words, we don't know yet, but now we can at least look, right?
Now we have a way to look.
Yes. Yeah, exactly.
Fair enough. That's the idea.
Would you be open to discussing some of the challenging SPS cases you've had
and how you've overcome them?
Even if you can't get into any of the material details,
maybe just, you know, trying to use this technology
and trying to harness all of its benefits in challenging sintering situations.
Yeah, sure. I can definitely get into that.
So, you know, one of the projects that we worked on,
it was with a metallic, it was a metal powder,
and we were requested by our customer to be able to embed a wire inside of it.
And that wire had to be, it was also metallic,
but it had to be completely isolated from,
electrically isolated from the part itself.
So we had to center powder around it,
but then keep it so it was completely isolated from the wire.
And so that's a pretty significant challenge
because any coating you're going to put on there,
you know, that I've kind of been able to find
is typically with any other sintering process,
you're going to go way too hot, you're going to melt,
it's going to be, you know, it's going to be a mess.
And so with SPS, because we were able to sinter at such low temperatures
in comparison to other processes,
we were able to put on that coating and effectively, you know,
isolate that wire from the kind of external, you know, metal body.
And so that was a pretty cool achievement that we had with SPS
that I can say that I don't think that many other processes
could have been able to pull off.
And did you have to make special dyes to orient that wire?
Because, you know, in my limited experience with SPS,
I do know that trying to include other objects within the sintered body,
they can get affected by the currents and displaced during the operation.
Yes, yeah, we had to make a special dye, special tooling design
to be able to, because that wire had to stick out, obviously,
and so you're sticking out on opposite sides.
You had to make sure that was kind of aligned properly.
And so we had to make special tooling to make sure that stayed in alignment
while sintering was occurring.
And like you said, yeah, making sure there was no conductive path
from wire as you're sintering to get any hot spotting,
any sort of thing like that.
So yeah, that was all part of the extensive kind of process
we did to develop it.
So one of the repeated reasons why I think SPS could be a displace of,
you know, innovative technology just is cost.
Instead of these really slow ramp-up times,
now you can get to temperature fast, maybe even get out of temperature quickly.
Do you actually have some numbers for us on how much sort of cost
or energy savings we're talking about for a company?
Yeah, there have been some studies done,
and obviously just from firsthand experience,
we're talking with certain programs up to an 80% energy savings
when it comes to the SPS versus, say, a hot press.
And then obviously in terms of time, you can get a part or multiple parts
if you're doing any type of stacking or multi-sample tooling.
You can get parts out in a few hours versus a hot press
that's going to be 24 hours plus you're doing anything large.
So that's a big savings as well.
But on the energy side, the thing I'd like to kind of point out
is that using a hot press, you have to heat up a whole furnace.
So you're heating up this massive chamber.
Everything has to be heated up to the same thing.
Versus SPS, your heat is all focused on exactly where you want it.
And you could even really focus it when it comes to changing your tooling
for a thermal gradient or focusing on a bond line,
so really focusing your heat in one specific area.
So yeah, just kind of picturing that in your head
of you're only heating the very small area versus an entire chamber.
You can kind of visualize how big of a difference it is.
Are there any new sensors or probes that you guys are looking at
to sort of gather more information from real-time measurements?
Way back in the day, the ones I saw had a pyrometer
looking basically at the temperature from the outside.
You could drill a little hole and try and look towards the middle.
You could put a thermocouple in there.
And then a few years later, I saw the German SPS company
was actually putting a pyrometer looking straight up.
And so you could sort of get an idea of the gradient through the sample.
Has there been more innovation in this space?
Those are still the primary ways that you're measuring your temperature
during the process.
I think the real kind of innovation is when you can use the simulation software
in kind of congruence with those.
And so you can, again, maybe you do a first trial.
You actually put a thermocouple or something that goes all the way
to the center of the part.
You run your kind of sacrificial part, and that gives you kind of
approximately what the center temperature is.
And then you have also one that's on the outside measuring temperature.
And then from there, you can use that data with the simulation software
to then kind of predict how things are going to happen
for different things moving forward with that particular material.
But in terms of new sensors or probes, right now that really hasn't been
a big focus that I've seen in the community.
You kind of mentioned that there is some trial and error to it.
So when you're given a new sample, some client comes to you
wanting to make a new material or have that SPSed,
how much of it is trial and error versus applying your own previous theory
and sort of knowledge about SPS and just experience
with what sort of failures can occur?
Very dependent on exactly what material they're coming to us with.
If it's something that's the same or similar to what we've done,
then, yeah, we will be able to use kind of previous work
when it comes to parameters, temperature, pressure, hold time,
that sort of thing, and be able to quickly typically get to a point
where we're getting to full density or whatever properties they're looking for.
If it's something more kind of nuanced, it's a really novel material,
then that will be more trial and error.
That will be more kind of first using our SPS in what we call a manual mode
and basically just watching displacement and watching the curves
as we're increasing temperature.
And that will give us an indication of how's displacement going,
when does it level off, do we start to see any sort of expansion,
any melting that occurs, and then from there,
our kind of expert operators can gauge in a few runs
where kind of the optimal level is after analysis of the part.
So here's another question for you, Eric.
I'm curious what sort of fields or industries you feel have been
sort of dramatically transformed by the advent of SPS.
So a big one is high HP alloys, refractory alloys.
So, you know, these materials kind of background on those,
obviously, they're metallic materials that are really resistant to heat
and to wear, you know, so they're great for extreme environments.
You know, think hypersonics, think space, nuclear applications.
But because of the high melting points of them, you know,
they're really hard to process.
But SPS has proven now to be a great tool, kind of as you mentioned earlier,
you know, that we did the work with INL, to be able to center those.
And so it's something that is in the transformation process, I would say,
because those kind of materials are pretty new.
They're still all being developed.
But I think that's a big one that is going to use SPS for a long time
to make these kind of next generation advanced materials.
Going forward, what do you think the future holds for this technology?
Is it basically done being innovated or is there a lot more to be done?
Oh, I think there's a ton more to be done.
I think there's a lot of innovation, you know, comes to the complex shapes.
Comes to expanding the technology into manufacturing.
So that's going to be a whole new challenge, you know, as we're getting now.
You know, there's only a very small amount of companies that are using it
in any type of real, like, high volume manufacturing applications right now.
And so a lot of innovation is going to have to be done there.
Utilizing other industries, other kind of things like that are already being done,
like hot press and high volume.
But using that to be able to make these advanced materials with SPS,
but also in a high volume manufacturing sort of area.
So big thanks to our sponsor for today's episode, Calnano.
We've been talking with Eric Eiermann.
So you've heard how, you know, Calnano is a leader in this area
of SPS manufacturing.
They've been in the business of advanced material science and R&D
and manufacturing for quite a while.
They are the number one provider for R&D manufacturing
full services for SPS in North America.
Like I said, I've used them in the past before and had really good experiences
with them on some of my federal grants that I've been working on.
Their programs can range from a few samples to full scale R&D
and production products made with SPS.
And notably, I think it's cool, he mentioned that they work
with the manufacturer, Suga.
And this company, Suga, has released the instrument, the SPS-2000,
that has some of these interesting and unique features
that we talked about in today's episode, things like degas mode,
rapid cooling mode, or the selectable waveform.
So I think those are cool things to keep in mind
if you're considering purchasing a new unit as well.
And then finally, Calnano is not just in the business of selling machines
and doing this as a service, but they also sell a lot of the tooling
and the consumables that go into using one of these devices.
So things like dyes and the components they're in.
They have a machine shop that allows them to fabricate
specialized parts to order.
So if you need some of those components, maybe look them up.
Our podcast is also sponsored by Materials Today.
Visit materialstoday.com and you can stay up to date
with everything that's happening in the materials science field.
And always, you can read some of the really cool articles
that they have published.
And it's obviously more than just a journal.
They are also really about building community.
You can check out the other books, conferences,
and related programs that they have to offer.
And as always, thank you for listening to this episode
of the Materialism Podcast.
If you have questions or feedback,
please send us emails at materialism.podcast at gmail.com.
Make sure you subscribe to the show on iTunes, Spotify, Google Podcasts,
or wherever you listen.
And if you like the show and want to help us reach more people,
consider leaving a review.
It helps us improve and it exposes new people to the show.
Finally, check out our Instagram page at materialism.podcast
and connect with us to let us know what new material
you'd like to hear about next.
Before we go, we'd like to give a shout-out to Alphabot and Colabyte
for making the music for the podcast.
They both make a ton of really cool synthwave music,
so go check them out on Spotify and YouTube.
Catch you next time.
Until next time.
The inventors of fire, electricity, magnetism,
iron, lead, glass, silk, cotton,
the makers of tools, the captors of lightning,
the architect, the engineer, the musician
are all beneficiaries of the materials of this world
and are bound only by their imaginations
in manipulating those materials.