EC465 MEMS || Lect 5 || MEMS ACTUATORS || KTU || S7 ECE
This Video Lectute contains
1. ACTUATORS?
2. ACTUATION USING
Thermal Forces
SMA
Peizo Electric material
Electrostatic Forces
For
Course Overview: https://youtu.be/Br82mvn5beg
What are MEMS? https://youtu.be/TB7NTcN9tAg
Acoustic Wave Sensors | BioMEMS : https://youtu.be/XBZGUlU4QCg
Chemical Sensors || Optical Sensors :https://youtu.be/WKGFXMNb8sY
Pressure Sensors || Temparature Sensors: https://youtu.be/OS8dbWiq2w8
FULL CLASS FOR MEMS: https://www.youtube.com/playlist?list=PL2UV2EJdMQmiqKJXYU56KbT2APawSe7tr
#ktu#engineering#kerala#mems #microelectronics #vlsi #ktunotes #ece #btech#ktustudents#sensor #microsensors #microdevices #microfabrication#ktuececlassroom
Hi all, today we are going to discuss about MEMS Sensase, which is the introduction part of this lecture.
Today we are going to discuss about MEMS Adjutase.
In today's lecture, we are going to discuss about Adjutase.
Adjutation using Thermal Force, Shape Memory Alloy, Piezoelectric Material, Electrostatic Forces.
So what is Adjutor?
Adjutor is a mechanical device.
Adjutor is a mechanical device for moving or controlling something.
Adjutor provides motion.
Adjutor is a mechanical device for moving or controlling something.
Adjutor is an important part of the Microsystem.
Adjutation process is mainly done in four ways.
Adjutation using Thermal Forces, Shape Memory Alloy, Piezoelectric Crystals, Electrostatic Forces.
Many a time, Adjutor is a device which provides a desired motion to a power source.
when it is connected to a power source, it can provide a proper motion.
So, Adjutor is designed to provide a desired motion when driven by a power source.
HATCHETTES is an electric relay
INKJET printer heads are also HATCHETTES
HATCHETTES is a mechanical device for motion and movement
The driving current used in the HATCHETTES will vary according to the application
If we switch it on and off, electric current will pass through the HATCHETTES
Resistance heating will also pass through the HATCHETTES
In motors and solenoid devices, the HATCHETTES is based on the principle of electromagnetic induction
The driving power for the HATCHETTES depends on the application
The driving power for different applications will be different
So basically, an actuator is a mechanical device used for moving or controlling something.
That is what we call actuators.
And there are four principles means of actuation.
Actuation using thermal forces, shape memory, alloy, piezoelectric crystal and electrostatic forces.
Next, working principle for micro actuators.
So far, we have studied a block diagram like this in micro sensors.
It is the same block diagram. There is not much difference.
Instead of the micro sensing element we studied there, here we are using the micro actuating element.
Different blocks are power supply, transduction unit, actuating element, output action.
These are the main blocks.
In this, power supply is the electric current or voltage.
Transduction unit is
Appropriate form of power supply is decided form of actions or actions of the actuating element.
Transduction unit is used to convert it.
Here, actuating element is a material for which movement is possible.
Actuating element or output action is mainly prescribed motion.
So, let us see the actuation methods.
There are four methods of actuation.
One is actuation using thermal forces, shape memory, alloy, piezoelectric crystal and electrostatic forces.
Let us see one by one.
First one is actuation using thermal forces.
The main principle of actuation is,
If we increase the temperature of solids, deformation will occur.
For example, we take a solid rod.
If its length is L,
If the length of the solid is delta L,
Delta L is equal to alpha into delta T.
Alpha is the coefficient of thermal expansion.
It is a material property.
Coefficient of thermal expansion Ct is different for each material.
Based on the property and the change in temperature,
Changes will occur for the length of the solid rods.
This figure is a bimetallic strip.
It is a material formed by combining two different materials.
A temperature change is created in it.
Coefficient of thermal expansion Ct is different for each material.
In this figure, alpha 1 and alpha 2 are present.
If these two are different,
When we apply the same heat,
The thermal expansion will be different.
In this figure, alpha 1 is the coefficient of thermal expansion.
Alpha 2 is the coefficient of thermal expansion.
Alpha 1 is the coefficient of thermal expansion.
When one material expands more than the other,
There will be a bending process.
This is what we see when we apply heat.
When the other material is more than the other,
When one material expands more than the other,
There will be a bending process.
This is the principle based on which we perform attrition.
This is called attrition using thermal forces.
When we remove the heat,
It will regain its original shape.
It will be able to return to its original shape.
This method is usually used in micro switches, relays, micro clamps, micro valves.
Attrition using thermal forces is usually used in such MEMS products.
Next, let's look at attrition using shape memory alloys.
What is a shape memory alloy?
Shape memory alloys are materials that have a memory of their original shape.
Shape memory alloys are materials that have memory of their original geometry or shape
Shape at typical elevated temperature of production.
Even if it is worked at a very high elevated temperature,
They have a memory of their shape or geometry.
Shape memory alloys are such alloys.
We study the attrition using those alloys.
These alloys deform to different geometries depending on the temperature.
It will change to different shapes.
If we apply heat at an elevated temperature,
They will be able to attain their original shape.
The shape memory alloys we usually use are nitinol or tin and nickel alloys.
We use shape memory alloys to attrition micro switches.
What are shape memory alloys?
Shape memory alloys have a memory of their original geometry or shape.
If it is made at an elevated temperature,
It will come to its original shape or geometry.
Alloys deform to different geometries depending on the room temperature.
If it is made at an elevated temperature,
It will come to its original shape or geometry.
We usually use shape memory alloys to attrition micro switches.
Attrition using piezoelectric crystals.
Piezoelectric crystal we know is quartz crystal.
It is a piezoelectric crystal.
Rochelet salt is an example of piezoelectric material.
The piezoelectric material we use here is quartz.
Quartz has an interesting behavior.
When we give mechanical deformation,
It gives corresponding electrical voltage.
When we give electrical voltage,
It gives mechanical deformation.
That is what we call piezoelectric effect.
Because of this piezoelectric effect,
The material we select for attrition purpose is quartz crystal.
Quartz is a piezoelectric crystal we use for this purpose.
That is what is shown in the diagram.
When we apply voltage,
Mechanical deformation occurs.
When we give mechanical deformation,
Corresponding voltage produces it.
Piezoelectric character is the peculiar behavior of that process.
This is a diagram of how a piezoelectric material is connected to a micro relay or a micro switch.
Piezoelectric material is applied to the silicon cantilever beam.
When we apply a voltage to the piezoelectric material,
Corresponding mechanical deformation occurs.
The cantilever beam moves.
That is what is happening here.
This is a diagram of how a piezoelectric material is connected to a micro relay or a micro switch.
Now let us see how attrition is done using electrostatic forces.
Electrostatic force is developed between two particles.
The main working principle is in coulombs.
What is electrostatic force?
Electrostatic force is the process of inducing an electrical force of attrition or repulsion through an electric field.
The electrostatic force is defined as the electrical force of attrition or repulsion induced by an electrical field.
We know that in coulombs,
F is equal to 1 by 4 pi epsilon 0 q 1 q 2 by r square.
Here, q is written as q dash.
Epsilon is the permittivity of the medium between two particles.
Its value is 8.85 into 10 raised to minus 12 coulomb square Newton meter square.
Its value r is the distance between the particles.
The process of attrition using electrostatic forces is based on coulombs.
Now let us see the plates of electrostatic force normal to two electrically charged plates.
We know that when we apply a potential across two plates, an electric field is induced.
We have also studied how a capacitance effect is induced.
The equation of the capacitance is epsilon 0 epsilon r into A by D or epsilon 0 epsilon r into WL by D.
The normal force induced there is FD.
We can write FD as minus 1 by 2 into epsilon 0 epsilon r WL by D square into V square.
This is the normal force induced in those two plates.
Epsilon r is the relative permittivity of the dielectric material between two plates.
Now we have to misalign this plate.
The other plate was aligned.
If we misalign this plate, we can develop two directions of electrostatic force.
One is force in the width direction and the other is force in the length direction.
Force in the width direction is half epsilon 0 epsilon r into L length divided by D.
The distance between the two plates into V square.
This equation is based on that equation.
At the same time, what is the force in the length direction?
W is the force in the length direction.
Similarly, what is the force in the width direction?
L is the force in the width direction.
So far we have studied the equation FD is equal to minus 1 by 2 epsilon 0 epsilon r into WL into V square divided by D square.
If it is misaligned, force will develop in the width direction and force will develop in the length direction.
This is the equation for force in the width direction.
This is the equation for force in the length direction.
Minus 1 by 2 epsilon r epsilon 0 into W by D into V square.
Electrostatic forces are generally used in micromotors, comb drives and micro grippers.
The main disadvantage of this equation is that the force generated by this equation is very small.
Therefore, the application of this equation is very limited.
The application of this equation is limited to optical switches and micro grippers.
We have discussed the working principle of actuators, different types of actuators, thermal forces, SMA, shape memory alloys, piezoelectric material, electrostatic forces.
I hope everyone understood.
See you in the next lecture.

