Basic Electronics For KTU students-Frequency Reuse
Oct 6, 2023
Mobile communication
FOR FULL CLASS: https://www.youtube.com/playlist?list=PL2UV2EJdMQmjKsQm-dKy2Dr42PWiTzx4U
So, Frequency Reuse, Why Frequency Reuse?
For the efficient spectrum usage for radio communication system, we are using Frequency
Reuse purpose.
Example, suppose each user is allocated a channel and each channel have a bandwidth
of 25kHz to enable sufficient audio quality to be carried as well as enabling there to
be a good band between adjacent channels to ensure there is no interference.
Using this concept, only possible to accommodate 40 users in a frequency band of 1MHz and 4000
users in a frequency band of 100MHz wide.
Today cellular systems have millions of subscribers and therefore a far more efficient method
of using the available spectrum is needed.
The method that is employed is to enable frequencies to be reused.
So here, each cellular base station is allocated a group of radio channels with a small geographical
area called a cell.
The neighboring cells are assigned with different channel groups.
By limiting the coverage area to within the boundary of a cell, the channel groups may
be reused to cover different cells.
Keep interference level with tolerable limits.
Because of only a small number of radio channel frequencies are available for mobile system,
engineers had to find a way to reuse the radio channels to carry more than one conversation
at a time.
The solution adopted by the industry was the frequency planning or frequency reuse concept.
In this concept, is based on assigning to each channel a group of radio channels within
a same geographical area.
Channels are assigned a group of channels that is completely different from neighboring
cells.
The coverage area of a cell is called the footprint.
The same group of channels can be used in different cells that are far enough away from
each other so that the frequencies do not interfere.
This is called frequency reuse and the reuse distance is RC root of root n, where RC is
the range that covered by the base station and n is the number of cells in a cluster.
So here the concept of frequency reuse is illustrated in this figure.
Here we are considering two clusters, cluster 1 and cluster 2 and each cell have different
frequencies in cluster 1, f1 to f7 and that same frequency that is used in cluster 1 is
used in cluster 2 also, f1 to f7 and here f3, two clusters, you can see that here f3
and that same frequency reused in cluster 2, f3 has a certain distance that is reused
distance that is represented in that figure and RC denotes that range that base station
can cover.
There are some advantages for reusing that frequency reuse.
You know that many transmitters of same output power operating at the same frequencies can
be used.
It reduces the minimum height of the transmitting antenna and it has some disadvantages.
The main disadvantage is that co-channel interference can occur if the system is not properly designed.
If we are not properly using the frequency reuse concept, there may co-channel interference
can occur.
Co-channel interference is a phenomenon in which two frequency signals of adjacent channels
interfere each other.
It is called co-channel interference that may happen.
Thank you.

