KTU BIOMEDICAL ENGINEERING || EC365 || MODULE 3 || LECT 16 || Electromyography (EMG))
For the full video of this course : https://www.youtube.com/playlist?list=PL2UV2EJdMQmh3GlNha5gwN8IsIyjOKcGh
#ktubiomedical #biomedicalengineering #ktu
Hi all, we are discussing about EMG or Electromyogram
What is Electromyogram?
It is used to measure the potential of muscles and other organs
Electromyography is the instrument used to measure the potential of muscles and other organs
Electromyogram is the instrument used to measure the potential of muscles and other organs
The potential range of Electromyogram is 50uV to 30mV
There are two types of EMG measurement
1. Using Surface Electrode
2. Needle Electrode
Surface Electrode is used to measure the surface of the skin
Needle Electrode is used to measure the electrical activity of muscles
Needle Electrode is used to measure the electrical activity of muscle fibres
In the case of needle EMG, a needle electrode is inserted through the skin into the tissue.
A trained expert or a physician can observe the electrical activity of the muscles.
Even though the muscles are resting, they can see a normal electrical activity.
But if there is any abnormal spontaneous activity, it indicates that the nerve fiber, motor neuron or muscle fibers are damaged.
The needle EMG shows only a local picture of the entire muscular activity.
So we need to accurately measure the electrical activity of the muscles.
The surface electrode EMG places muscle fibers and shows a normal activity of the muscles.
Surface electrodes are more comfortable for patients than needle electrodes.
EMG is used in most of the physiotherapy clinics.
The electrical potential of a muscle cell is known as motor unit action potential or MUAP.
EMG signals are produced using superimposed motor unit action potential.
EMG signals are decomposed into MUAPs for detailed analysis.
The shape of the EMG affects many factors.
Let's see the block diagram of an EMG system.
EMG is a block diagram of an electromyograph or EMG measuring machine.
Electrodes, Bioelectric Amplifier, EMG Recorder, AF Amplifier, Oscilloscope.
The first one is EMG electrode.
EMG electrode is used for EMG recording.
EMG electrode is used for EMG placement.
The next one is Bioelectric amplifier.
Bioelectric amplifiers are weak signals generated by EMG.
Bioelectric amplifiers are used for amplification of weak signals.
The range of Bioelectric amplifiers is few mV to mV.
Bioelectric amplifiers have high gain and high CMRR.
The next block is AF Amplifier.
When needle electrodes are inserted into the muscles,
the normal muscles produce an electric sound.
But the damaged muscles produce a different sound.
AF Amplifiers are used to identify this sound.
The next block is Oscilloscope.
Oscilloscope is used for measuring EMG.
The next block is EMG Recorder.
EMG Recorder is used for photographic recording.
The next block is Frequency Limitations.
The normal EMG is in the range 60 to 70 Hz.
EMG appear as a random noise signal.
The shape of the waveform may vary based on the part of the body from which EMG is taken.
The normal EMG is in the range 60 to 70 Hz.
The shape of the waveform may vary based on the part of the body from which EMG is taken.
Low Frequency Limitation does not allow us to record EMG in a Strip Chart Recorder.
The next block is Applications of EMG.
EMG is used to identify two categories of diseases.
One is Neuropathies and the other is Myopathies.
EMG is used to identify Neuromuscular diseases.
EMG is used for Unvoiced Speech Recognition.
EMG is used to identify muscle activity.
That's all about EMG.
See you in the next lecture.

