LITHOGRAPHY || MODULE 4 || EC 465 || KTU MEMS || LECTURE 30
FOR FULL CLASS FOR MEMS: https://www.youtube.com/playlist?list=PL2UV2EJdMQmiqKJXYU56KbT2APawSe7tr
#ktumems #ktu
Hi all, today we are going to start microsystem fabrication
First we are going to learn about photolithography
You have already studied photolithography in VLSI
It is the same subject, no major changes
So, let's see what photolithography is
In microsystem, we use 3D structural geometry
This geometry is extremely high precision
It is a major challenge for engineers to create geometry in micro scale
So, photolithography or micro lithography appears to be the only viable way for producing high precision patterning on substrate in micro scale at present time
So, photolithography is the only viable technique for producing high precision patterning on substrate
You have already studied the meaning of lithography in VLSI
Lithography is a word derived from two Greek words
Litho means stone and graphene means to write
So, lithography is stone to write or stone mapping
So, let's see what is the process in photolithography
Photolithography process involves the use of an optical image and a photosensitive film to produce a pattern on the substrate
In micro electronics, these patterns are necessary for the p-n junction, diodes, capacitors, etc. for integrated circuits
The substrate at the top left of the figure can be silicon wafer as in micro electronics or other substrate materials such as silicon dioxide or silicon nitride
A photoresist is first coated on the flat surface of the substrate. The substrate with photoresist is then exposed to a set of lights through transparent mask with desired pattern
A photoresist is then exposed to a set of lights through transparent mask with desired pattern
Photoresist materials change their solubility when they are exposed to light. Photoresists that become soluble under light are classified as positive photoresists when negative photoresists become more soluble under shadow.
Photoresists that become soluble under light are classified as positive photoresists when negative photoresists become more soluble under light.
Photoresists that become soluble under light are classified as negative photoresists when negative photoresists become more soluble under light.
Photoresists that become soluble under light are classified as positive photoresists when negative photoresists become more soluble under light.
The class number of a clean room is determined by the air quality of the room.
Photoresist is highly sensitive to ultraviolet light.
Positive photoresist provides more clear edge definition than negative photoresist.
Thickness between 0.5 to 2 p.m. with plus 5 nanometer variation.
Photoresist is highly sensitive to ultraviolet light.

