PROBLEMS BASED ON VOLTAGE DIVISION AND CURRENT DIVISION RULE || KTU || EST 130
Oct 5, 2023
This video contains some problems and their solutions based on Current and Voltage Division Rules.
For full class on EST 130: BASICS OF ELECTRICAL ENGINEERING
https://youtube.com/playlist?list=PL2UV2EJdMQmjFL6uDy4zr6vei4hYtNECa
Hello students, today we are going to discuss the lecture 3 of the course Basic Electrical Engineering, based on module 1.
In this, we are going to discuss some questions related to the current division rule and voltage division rule that we studied in the previous class.
I hope you have understood the previous class.
Now, let's go to the questions.
1. Calculate the currents I1, I2 in the following circuit.
We are asked to find out I1 and I2.
Before going to the point where we find out I1 and I2, let's analyze the circuit one more time.
Look at this 5 ohm resistance and this 2 ohm resistance.
Which is the connection?
5 ohm resistance goes directly to 2 ohm resistance.
That means, what is the connection between 5 ohm resistance and 2 ohm resistance?
It is series connection.
This is the case I am talking about.
This 5 ohm resistance and 2 ohm resistance, which is the connection?
It is series connection.
Let's redraw that figure one more time.
Let's see.
How much is the R equivalent of a series resistance?
R1 plus R2.
Since there are two resistances, R equivalent is equal to R1 plus R2.
That means, 5 ohm plus 2 ohm.
What is the answer?
We got 7 ohm.
Let's substitute this value here.
We can write these two resistances as equivalent resistances and 7 ohm resistances.
Because they are connected in series.
Let's see.
We wrote R equivalent 7 ohm here.
We redraw the figure one more time.
The current is split up and flows through these two branches.
I1 and I2.
This is what we are trying to find out.
Even if we write equivalent 7 ohm for 5 ohm and 2 ohm resistances, the current flowing through them is I2.
What we are trying to find out is I1 and I2.
Let's find I1.
According to the current division rule, how can we write I1?
I1 is equal to total current into other branch resistance.
The other branch resistance here is 7, right?
7 divided by 3 plus 7.
That means, total resistance.
Total current is 10 ampere into 7 divided by 7 plus 3 is 10.
Both 10 and 10 are cancelled out.
We got current I1 from 7 ampere.
Let's find I2.
I2 is equal to total current into
I2 is the current flowing through this branch.
I2 is the current flowing through 7 ohm resistance.
According to the current division rule, how can we write I2?
I2 is equal to total current.
That means, 10 ampere into opposite branch resistance.
3 ohm divided by total resistance 7 plus 3.
That means, total current here is 10.
10 into 3 divided by 10.
When we cancel out, what do we get?
We get 3 ampere.
How much I1 we got?
7 ampere.
We got I2 as 3 ampere.
What we were trying to find in our question?
We were trying to find I1 and I2, right?
The current I1 and I2 flowing through this circuit.
We found that.
We got I1 as 7 ampere and I2 as 3 ampere.
Let's see the next question.
Find the current through 20 ohm resistance.
We are trying to find the current flowing through this 20 ohm resistance.
Let's see this figure.
How many battery sources are there in this circuit?
There are two battery sources.
One is of 120 volts and the other is of 65 volts.
Let's see the polarities of these two.
This is negative terminal and this is negative terminal.
Let's write this as 120 minus 65.
Let's write 120 minus 65 as one battery source.
I will get 55 volts.
Instead of these two battery sources, I will get one battery source.
Let's draw the figure again.
This is the voltage source.
There is a resistance here.
Let's plug the battery source here and write 55 volts as one battery source.
What are the other resistances?
This is 10 ohm resistance.
This is 20 ohm.
We are trying to find the current flowing through this.
This is 60 ohm.
There is a 30 ohm resistance below.
Let's see this figure again.
20 ohm and 60 ohm are connected parallelly.
According to the current division rule, we have to find the total current.
Voltage source is given here.
We have to find the current flowing through this circuit.
Only then we can find the current flowing through this 20 ohm resistance.
To find the total current, we know I.
This is V by R.
We have to find R equivalent here.
There are 4 resistors here.
These 2 resistors are parallel to each other.
We have to find the R equivalent of these 2 resistors.
The R equivalent we get is the series of 10 ohm and 30 ohm resistors.
We have to get the R equivalent from there.
We can find the total current here only if we divide the R equivalent of 55 volts.
Only if we get the total current, we can find the current flowing through 20 ohm resistance.
First, let's find the R equivalent.
I am taking a parallel case.
20 ohm resistance and 60 ohm resistance.
20 parallel 60.
20 ohm resistance is parallel to 60 ohm.
How do we get the R equivalent there?
20 into 60 divided by 20 plus 60.
6 into 2 is 12.
2 is equal to 0.
60 plus 20 is equal to 80.
8 into 1 is equal to 8.
Reminder is 4.
8 into 5 is equal to 40.
8 into 1 is equal to 20.
15 times is equal to 40.
How much is the R equivalent there?
I got 50 ohm.
This is 10 ohm.
What is this value?
15 ohm.
These two are parallel.
I got 15 ohm R equivalent there.
Next is 30 ohm.
How are these three resistances connected?
It is series.
What is the total R equivalent to find?
10 ohm resistance plus 15 ohm resistance plus 30 ohm resistance.
30 plus 10 is equal to 40.
What is 40 plus 15?
10 plus 15 plus 30 is equal to 55 ohm.
I will redraw this figure again.
I will write in one voltage source and one resistance.
I got 55 voltage and 55 ohm resistance.
I will get the total current flowing through this.
What is the equation?
I is equal to V by R.
V is equal to 55.
R is equal to 55.
It is 1 ampere current.
The total current here is 1 ampere.
We have to find the current flowing through 20 ohm resistance.
How did we learn according to the current division rule?
Current through 20 ohm resistance is equal to
total current into other branch resistance.
The other branch resistance here is 60.
I am using this circuit.
Current through this 20 ohm is equal to
total current into other branch resistance divided by total resistance.
Total resistance here is 20 plus 60.
We found the total current.
1 ampere into 60 by 20 plus 60.
60 divided by 80.
Cancel out 248 and 236.
When we divide it, we get the answer as 0.75 ampere.
The current flowing through 20 ohm resistance is equal to 0.75 ampere.
Hope you understood this concept.
In the given circuit, find the voltage across V3.
We have to find the voltage across V3 or 5 ohm resistance.
According to the voltage division rule,
V3 is equal to
What is the resistance across V3?
It is 5 ohm resistance.
5 divided by total resistance.
What is the total here?
2 ohm, 3 ohm and 5 ohm.
2 plus 3 plus 5 into total voltage.
Total voltage here is 10 volt.
5 divided by 10 into 10.
10 and 10 will cancel out.
5 voltage.
What is the voltage across V3?
5 volt.
Hope you understood this question.
We have to find the voltage across V3 or 5 ohm resistance.
V3 is equal to
What is the resistance across V3?
It is 5 ohm.
5 divided by total resistance into total voltage.
That's it.
Let's see the second question.
Second question.
Find V1 and V2 in the following circuit.
We have considered the circuit.
We have taken 12 volt battery source.
There are two resistances.
It is 20 ohm and 100 ohm.
Since it is in series, the voltage will be different.
Current will be same.
This is V1.
This is V2.
We have to find V1 and V2.
Let's find V1.
According to the voltage division rule,
What is V1?
V1 is equal to
What is the total voltage here?
12 into
What is the resistance across V1?
100 ohm resistance
divided by total resistance.
20 plus 100.
Isn't it?
What is the result?
12 into 100 by 120.
0, 0 cancel.
We get 10 volt.
What is V2?
Total voltage into
What is the resistance across V2?
20 ohm resistance.
20 divided by
20 plus 100.
What is the result?
12 into 20 by 120.
0, 0.
12, 12 cancel out.
We get 2 volt.
What is V1?
10 volt.
We got 2 volt.
We got the answer in our question.
This is the problem based on voltage division rule.
I hope you understood how to solve it.
Let's try another problem based on this.
Third question.
Calculate the voltages V1 and V2 in the following circuit.
Consider the circuit.
There are 10 volt battery sources.
There are 4 resistances here.
10 ohm, 3 ohm, 5 ohm and 1 ohm.
V1 and V2 are not marked.
This is V1.
This is V2.
We have to find the voltages V1 and V2.
Let's see the figure again.
What is the connection between 5 and 1 ohm?
Series.
Let's find the R-equivalence.
How to find the R-equivalence?
5 ohm plus 1 ohm.
Because it is a series connection.
We get total 6 ohm.
Let's modify the figure again.
Let me draw it.
10 volt.
10 ohm resistance.
3 ohm.
This is V1.
This is V2.
5 plus 1 is 6 ohm.
What is the connection between 3 and 6 ohm resistances?
It is parallel.
Let's modify the figure again and find the R-equivalent.
3 into 6 by 3 plus 6.
Because 3 ohm and 6 ohm resistances are parallel.
How to find the R-equivalent?
3 into 6 by 3 plus 6.
That means 18 by 9.
Which is equal to 2 ohm.
Let me draw the figure again.
This is 2 ohm.
This is 10 ohm.
This is 10 volt.
10 volt.
Let's write like that.
This is V1.
This is V2.
V1 is equal to total voltage into 10 ohm resistance divided by total resistance 10 plus 2.
Which is equal to 10 into 10 is equal to 100 divided by 12.
6 times 5 is equal to 0.
2 times 3 is equal to 6.
4 times 2 is equal to 4.
5 times 2 is equal to 10.
25 by 3 is equal to 8.33.
8.33 volt is V1.
V1 is equal to 8.33 volt.
Let's find V2.
V2 is total voltage.
V2 is equal to total resistance divided by total resistance 10 plus 2.
Which is equal to 20 by 12.
20 by 12 is equal to 5 by 3.
Divided by 5 is equal to 1.66 volt.
V1 is equal to 8.33 volt.
V2 is equal to 1.66 volt.
I hope you have understood how to get V1 and V2.
These are the simple problems based on voltage and current division.
I hope you have understood today's section.
See you in the next section.
Thank you.

