MAGNETIC SENSING AND ACTUATION || MODULE 2 || KTU MEMS || MEMS KTU || LECTURE 15
FOR FULL CLASS FOR MEMS: https://www.youtube.com/playlist?list=PL2UV2EJdMQmiqKJXYU56KbT2APawSe7tr
#ktu #ktumems #mems #ktuececlassroom
Hi all, today we are discussing about Magnetic Attrition
Magnetic Sensing and Magnetic Attrition is the most widely used translation principle in our daily life
Magnetic Sensing and Magnetic Attrition are closely related
In general, we use magnetic sensors in data storage, consumer electronics and industrial applications
Magneto-resistive effect and Hall effect are the common principles of Magnetic Sensing
The basic principles of Magnetic Sensing are Magneto-resistive effect and Hall effect
So there are some selected principles of Micromagnetic AGTs
Why do we use a magnetic field?
A magnetic field is used to produce force, torque or displacement of a microstructure
A magnetic field can be used to produce force, torque or displacement of microstructure
A driving magnetic field can act on number of elements
including current-carrying wires, inductor coils, pieces of magnetic material or magnetostrictive material
As a result, there is an interaction between the current-carrying conductor and the external magnetic field
This interaction between current-carrying conductor and external magnetic field is used in Lorentz-Foyce actuator
You have studied Lorentz-Foyce
Lorentz-Foyce F is equal to Qv cross T
V is the velocity of charge
It is a vector quantity, so there is an arrow mark above
We can write the magnitude of force as F is equal to Qv B sin theta
There is a small correction here
F is equal to Qv cross T
It should be B
The equation of Lorentz-Foyce is F is equal to Q into E plus V cross B
Q is the electric charge
E is the external electric field
V is the velocity
B is the magnetic field
T is the cross product
F is equal to Qv B sin theta
V cross B is equal to VB sin theta
F is equal to Qv B sin theta
Theta is the velocity and magnetic field angle
To find the direction of force, we use Fleming's thumb rule
We use right-hand thumb rule to find the direction of force
Magnetic actuator can occur as a result of interaction between permanent magnet and external magnetic field
A classic example is magnetic compass
We are all familiar with magnetic compass
A permanent magnet is used in magnetic compass
It is a hard ferromagnetic material
If the internal and external magnetic lines are aligned, there will not be any force or torque will be exerted on the compass needle
When will there be any force or torque exerted on the compass needle?
The direction of force will be not aligned
In the case of compass needle, the direction of internal magnetization is not aligned with the local magnetic field line
A torque will be exerted on the compass needle
So that torque causes needle to rotate until the internal magnetic field line is aligned with the external magnetic field line
This principle of interaction is used in micro scale sensors and actuators
External magnetic field can be classified into two categories
Specially Uniform Magnetic Field and Non-Uniform Magnetic Field with a Gradient
It depends on the type of magnet used
Initial Orientation is based on alignment and misalignment
A net force or torque is produced
We can explain this using a figure
We can explain this using an example
First one is a permanent magnet
Second one is a permanent magnet
Third and fourth are soft magnets
Permanent magnet is a polarized magnet
Soft magnet is a non-polarized magnet
Second one is a Uniform External Magnetic Field
Uniform magnetic field denotes parallel lines
Third one is a Non-Uniform External Magnetic Field
We are trying to find the force and torque in these three conditions
We are not giving external magnetic field in the first condition
External magnetic field is the driving force
Since we are not giving external magnetic field in the first condition, net force and torque is zero
In the second condition, we are placing the soft magnet in a Uniform External Magnetic Field
We are applying a Uniform Magnetic Field
When we apply a Uniform External Magnetic Field, the soft magnet is in a non-polarized state
When we apply a Uniform External Magnetic Field, the soft magnet is in a polarized state
Permanent magnet is already polarized
In this condition, we can check the force and torque
In this case, if internal magnetic field and external magnetic field are aligned, net force is zero
Uniform External Magnetic Field is a constant in all points
So, net force is zero
In the second and third conditions, internal magnetic field and external magnetic field are misaligned
So, a torque is experienced there
In the third condition, we are applying a Non-Uniform External Magnetic Field
Non-Uniform External Magnetic Field means, each point has a different magnetic field
In this case, if internal magnetic field and external magnetic field are aligned, net force is generated
If internal magnetic field and external magnetic field are misaligned, a torque is generated
In case 1, force is generated
In case 2, force is generated
In case 1 and 3, force is generated
In case 2 and 4, torque and force are generated
Please note down the things we have discussed
I have given a summary to the table
Case A, Case B, Case C
Case A is Non-External Magnetic Field
Case B is Uniform Magnetic Field
Case C is Non-Uniform Magnetic Field
In this case, we are talking about the case of 4 magnets
We have studied the case of 4 magnets, 1, 2, 3, 4
In the case of 4 magnets, net force and net torque are not present
In case A, we are not applying any external force or external magnetic field
There is no net force or net torque
That is, in the case of 1, 2, 3, 4, zero is applied
In the case of Uniform Magnetic Field
Since the net force is Uniform Magnetic Field, the net force is zero
But in the case of misaligned magnets, torque is generated
In the case of 1 and 3, torque is zero
In the case of 2 and 4, torque is generated and denoted by T
In the case of Case C, we are applying Non-Uniform Magnetic Field
Since it is Non-Uniform Magnetic Field, in the case of 4 magnets, force is generated
But in the case of misaligned magnets, torque is not generated
In the case of 1 and 3, torque is not generated
In the case of 2 and 4, torque is generated
This is a summary of what we have studied in this table
Let us do a more detailed analysis
If there is an internal magnetization M for a magnetic material
We can consider it as a Charged Magnetic Dipole
A magnetized material with an internal magnetization M can be considered as a Charged Magnetic Dipole
For simplicity, we assume that there are two monopoles in the magnetic piece with opposite polarity
A monopole is a concentrated force on each monopole
The concentrated force on each monopole can be expressed by using an equation
F is equal to M into WT into H
M stands for Internal Magnetization
W and T are width and thickness of the cross section
H is the local strength of the biasing magnetic field
H is the magnetic field intensity
Force is proportional to the magnitude of internal magnetization and external driving magnetic field as well as the cross section dimensions of the piece
Let us use this equation
Force is proportional to the magnitude of internal magnetization and external driving magnetic field H as well as the cross section dimensions of the piece
Width and thickness of the cross section are proportional
The piece of magnetized material is the vector sum of forces concentrated on two monopoles
Let us analyze KSB
External magnetic field is uniform
Uniform magnetic field means the magnitude of H is identical everywhere
Since the magnitude of H is identical everywhere, hence no magnetic pieces experience net force in the KSB
KSB has a non-uniform magnetic field
Even if there are two poles in the KSB, the force will not be identical
So what is the net force produced in the case of KSB?
Here the net force F is equal to M into WT into delta H
Where delta H is the difference of magnetic driving field at two monopoles
The magnitude of delta H is equal to the distance between poles along the field line directions and the gradient of magnetic field dh by dl
That is, delta H can be represented as delta L into dou H divided by dou L
Now let us look at rotational torque
When is rotational torque developed?
Rotational torque can be developed between external magnetic field and a magnetized magnetic piece provided that internal magnetization and external magnetic field lines are not aligned
When is rotational torque developed?
When internal magnetization and external magnetic field lines are not aligned
Magnitude of torque is the product of force and distance between two lines of force
If a magnetized piece rotates freely, there should be an angular displacement
Magnetic attrition helps in eliminating electrical wires
But this is not the case in other techniques such as electrostatic, thermal, piezoelectric attrition
Magnetic attrition helps in eliminating electrical wires
Complexity of packaging and use drastically reduces
Relatively large magnetic field can be present in free space without harm or damage to humans or environment
Electric field can cause dielectric breakdown or electroacuation
These are the major advantages of magnetic attrition
Let us see some applications of magnetic attrition
Magnetic motor is a variable reluctance magnetic micromotor
Stators are made up of integrated electromagnets
Rotors are made up of soft magnetic materials
Stators are made up of integrated electromagnets
Rotors are made up of soft magnetic materials
There are two sets of salient poles in the motor
One set is the stator and the other set is the rotor
The phase coil is connected to the stator
When the phase coil is excited, the rotor poles near the excited stator poles are attracted to the stator poles
Rotor has a rotation
Rotor poles are aligned to the stator poles
Excited stator coil is switched off
Next phase is excited
Continuous motion occurs
Rotor thickness is 40 micrometer
Rotor is 40 micrometer thick and its diameter is about 500 micrometer
Then it is micro-assembled onto a chip containing stators or fabricated in an integrated fashion by electroplating
When we are applying a 500 milliampere current to each stator, it will produce a 12 degree of rotation
Or we can say that one incremental stroke is produced
When we are applying a 500 milliampere current to each stator, it will produce a 12 degree of rotation
Or we can say that one incremental stroke is produced
When we are applying a 300 milliampere current to each stator, it will produce a 12 degree of rotation
Rotation of the rotor was observed with speed and direction adjusted by the frequency and phase of firing order of the power supply
Predicted torque is 500 newton meter
Next example is magnetic beam adjustment
Its main unique performance characteristic is the ability to generate torque and achieve large angular displacement
So here the adjustment consists of a rigid flap supported on one side by two fixed free cantilevers
Each flap is made of polycrystalline silicon material and it is electroplated with ferromagnetic material
The ferromagnetic material used here is permalloy
When the external magnetic field is present, an internal magnetization is developed in the ferromagnetic piece
The value of the internal magnetization is 1.5 tesla
Internal magnetization is equal to saturation magnetization
Now let's apply a non-uniform magnetic field
When applying a non-uniform magnetic field, we learned that the torque and force will be developed
The magnitude of the magnetic torque is m magnitude is equal to F L cos theta
We learned the force equation when applying a magnetic field
We applied the force equation
The equation is MSWTH1 into L cos theta
So according to the formula of flexural bending beams under pure torque
The angular displacement is related to magnetic torque according to the equation
Theta max is equal to m magnitude into length divided by E into I
The maximum vertical displacement of the beam is y max is equal to m magnitude into L square divided by 2EI
So that's all about magnetic actuators
I hope everyone understood
See you in the next lecture
Thank you very much

