ECT281 ELECTRONIC CIRCUITS|| KTU MINOR || MOSFET||MODULE 2
MOSFET- Structure, Enhancement and Depletion types, principle of operation and characteristics.
#ktu #ECT281 #electroniccircuits
Transistors can be divided into two categories.
One is Bipolar Junction Transistor or BJT.
The second category is Field Effect Transistor or FET.
Transistors can be divided into two categories.
One is BJT. BJT stands for Bipolar Junction Transistor.
The second category is Field Effect Transistor.
FET is a three terminal device.
How many terminals does BJT have?
BJT has three terminals.
What are the terminals of BJT?
Emitter, Base and Collector.
Similarly, FET is a three terminal device.
These three terminals are Gate, Source and Drain.
These three terminals are the terminals of FET.
BJT is a current controlled device.
BJT is controlled by its base current.
BJT is a current controlled device.
FET is a field effect transistor.
FET is a voltage controlled device.
FET is a gate voltage.
FET is a voltage controlled device.
BJT is a current controlled device.
Let's divide FET into two categories.
One is JFET or Junction Field Effect Transistor.
Second is MOSFET or Metal Oxide Semiconductor Field Effect Transistor.
There are two types of Field Effect Transistors.
JFET and MOSFET.
This is BJT and FET.
How many terminals does BJT have?
It has three terminals.
How many terminals does FET have?
It has three terminals.
BJT has a base, a collector and an emitter.
FET has a gate, a gate, a drain and a source.
BJT controls the current.
Control current is IB or Base Current.
FET controls the voltage.
Control voltage is VGS.
What is the function of the collector current IC?
It is the function of the base current.
Have you studied the equation IC is equal to beta times IB?
IC is the function of the base current.
FET is the function of the collector current.
ID is the function of the gate source voltage.
BJT is divided into two categories.
NPN and PNPN.
NPN has a transistor and PNP has a transistor.
When we come to FET, we can divide it into two categories.
N-channel FET transistor and P-channel FET transistor.
Depends on the channel.
BJT is a bipolar device.
Bipolar means the conduction level is a function of two charging areas.
BJT conducts current through two charging areas.
Electrons and holes.
FET is a unipolar device.
It conducts current either through electrons or holes.
N-channel FET conducts current only through electrons.
P-channel FET conducts current only through holes.
BJT is a bipolar device.
It conducts current either through electrons or holes.
FET conducts current either through electrons or holes.
BJT conducts current either through electrons or holes.
Why is it called field effect?
What is field effect?
Field effect controls the applied voltage.
That is why it is called FET.
There are some advantages of FET compared to BJT.
First one is high input impedance.
Impedance is similar to resistance.
High input impedance is more than FET compared to BJT.
FET is more temperature stable.
Even if the temperature increases, there is no difference in the characteristics.
That is called temperature stability.
As BJT increases, the characteristics of the temperature changes.
FET is more temperature stable than BJT.
FETs are usually smaller than BJT.
BJT is smaller than FET.
Since FET is smaller, it is practically useful in integrated circuits or IC chips.
We can use FETs in IC chips.
Next, we divided FET into two.
Junction field effect transistor and MOSFET.
JFET and MOSFET.
You don't have to learn JFET.
I think you have learned JFET in the first year.
Did you learn JFET in the first year?
No.
Anyway, you don't have to learn JFET.
You have to learn MOSFET.
Let's look at MOSFET or Metal Oxide Semiconductor Field Effect Transistor.
Let's divide MOSFET into two.
Depletion MOSFET and Enhancement MOSFET.
Let's divide MOSFET into two.
Depletion MOSFET and Enhancement MOSFET.
This is a diagram of a depletion MOSFET.
How many terminals does a MOSFET have?
It has three terminals.
Which are the three terminals?
Gate, Drain, Source.
BJT stands for Base, Collector, Emitter.
Gate stands for Base.
Drain stands for Collector.
Source stands for Emitter.
Someone has come to join.
So, it has these three terminals.
It also has a substrate.
It forms everything in this substrate.
Whether it is a drain or a source, it forms everything in this substrate.
What is the substrate we have taken here?
It is a P-type substrate.
In this, there is an N region.
It is not actually N, but N plus.
Here also, there is an N region.
The reason for writing N plus is to show that it is heavily doped.
What is heavily doped?
Haven't you studied doping?
What is it?
Doping is the process of adding impurity to a semiconductor.
Why do we add impurity?
We add impurity to a semiconductor to increase conductivity.
Doping is that process.
So, we took a P-type substrate or a semiconductor.
Two heavily doped N plus regions were formed in it.
For each N plus region, we called one as a drain and the other as a source.
In this, we have given metal conducts.
In black, we have given metal conducts.
We have taken a terminal.
This is also a metal conduct.
We have taken a drain terminal.
This is a gate terminal.
This gate terminal has a silicon dioxide coating on top of it.
The main reason for calling it a depletion type MOSFET is that
there is a channel between the drain and the source.
That is why we call it a depletion type MOSFET.
Why do we call it a depletion type?
A channel is present in it.
An N channel is present in it.
Since an N channel is present, we can call it NMOS.
If it is a depletion N channel,
if the source and drain are N, we can call it NMOS.
If the source and drain are P, we can call it PMOS.
If both are P, we can call it N.
It is a N type substrate.
No confusion.
I am saying this much here.
The reason why we call it a depletion type MOSFET is
that a channel is present in a depletion type MOSFET.
An N channel is present here because it is an NMOS.
Since it is an NMOS, it is an N channel.
If it was PMOS, it would have been a P channel.
Since this channel is present here,
if a current condition occurs from here,
what do we call it?
When we apply a gate voltage here,
if a current flows from the drain to the source,
what do we call it?
We call it a current condition.
Look at this.
If this channel is present here,
the flow to the electrons is easy.
The flow from the drain to the source is easy.
Since the channel is present here,
even if we do not apply any voltage here,
even if the gate voltage is zero,
this transistor will be normally in ON condition.
Is it clear?
Sir, can you say it again?
I will say it again.
The specialty of a depletion type MOSFET is that
channels are present in a depletion type MOSFET.
If a transistor is conducting,
a transistor is conducting if a current flows from the drain to the source.
Since this channel is present here,
if we do not apply any voltage here,
the current flows through this channel.
So, depletion type MOSFET conducts even at zero gate voltage.
Is it clear?
The speciality of depletion mode MOSFET is that it has a channel.
So even when the voltage is low, the depletion mode MOSFET detects it.
What is the reason to call it MOS?
What is the reason to call it MOS, Metal Oxide Semiconductor?
We have given an insulating layer of silicon dioxide.
That is why it is called Metal Oxide Semiconductor.
We have given zero voltage here.
Even though we have not given any gate source voltage, the electrons will flow from the source to the drain.
Because there is a channel here.
There is a channel to flow like this.
Even though we have not given any gate source voltage, the electrons will flow from the source to the drain.
Current conduction is always in the opposite direction to the flow of electrons.
Where does the current flow from?
It flows from the drain to the source.
We have forward biased the drain source here.
We have given the plus positive of the drain here.
Where does the current flow from?
It flows from the drain to the source.
But the electron flow flows from the source to the drain.
This is how the depletion mode MOSFET works.
Even though we have not given any gate source voltage, the current conduction is always in the opposite direction to the flow of electrons.
Normally, the depletion mode MOSFET acts as an ON switch.
Even though we have not given any gate source voltage, the current conduction is always in the opposite direction to the flow of electrons.
If you give a positive voltage here, the speed of current conduction will increase.
If you want to switch off the depletion mode MOSFET, which is normally ON,
we have to give a negative voltage here.
How do we switch off the depletion mode MOSFET?
If we give a negative voltage here, the channel will be cut off from here.
The current conduction will stop when the channel is cut off.
Is it clear?
Yes.
Let me say it again.
The depletion mode MOSFET is normally ON.
We do not have to give any gate source voltage.
The current conduction is always in the opposite direction to the flow of electrons.
If we want to switch off the depletion mode MOSFET, we have to give a negative voltage here.
If we give a positive voltage here, the speed of current conduction will increase.
That is what is written here.
Now, when we give a negative voltage to the gate, the channel will be cut off.
When we give a negative voltage here, the gate becomes negative.
When we give a negative voltage here, the positive charges in the gate will be attracted to the gate.
When we give a negative voltage here, the channel will be cut off.
The current conduction will stop.
This is the working of a depletion mode MOSFET.
This is just a negative bias.
When we give a negative voltage, the conduction stops.
These are the characteristics.
When you studied BJT, did you study the output and input carriers?
Yes, I did.
When you studied BJT?
Yes, I did.
When you studied BJT, did you study the output current and output voltage?
Yes, I did.
When you studied the input carrier, did you study the input voltage and input current?
This is the transfer carrier.
Transfer carrier is the relation between input and output.
This is the output carrier.
This is the transfer carrier and this is the output carrier.
Transfer carrier is the relation between input and output.
Output carrier is the relation between output voltage and output current.
Let's see the transfer carrier first.
Transfer carrier is the relation between input and output.
Which is the controlled device called FET?
Is it current or voltage?
Voltage.
Input carrier, what is input?
It is voltage, right?
Yes.
Input terminal is the gate.
Gate is used instead of base, right?
Yes.
Likewise, source.
Didn't we study the common emitter configuration?
Likewise, we are drawing this figure using the common source configuration.
When we come to the common source configuration, what can we give instead of base emitter?
We can give gate source.
Input voltage is Vgs.
Gate source voltage is input voltage.
Output current is Id.
What is the collector here instead of collector?
It is drain.
Instead of output current, it is Id.
What is this?
Input, is this transistor normally on or off?
Depletion mode MOSFET.
It is normally on.
That is, what is this negative voltage?
Output current is increasing like this.
Can you see?
In negative voltage, output current is increasing.
When we give positive voltage here, it increases.
What did we learn now?
How can we turn off the depletion mode MOSFET?
By giving negative voltage.
See, as the negative voltage increases, the current condition decreases.
This is the output.
Can you see the output decreasing?
When this is minus 6 volts, the transistor is turned off.
Is it clear?
Yes, sir.
I will say it again.
Can anyone understand?
This is all there is to learn this diagram.
When the depletion mode MOSFET is on, the conduction starts earlier.
Before zero.
This is not zero.
Before zero, the transistor starts conducting.
When you studied diode, you studied like this.
You drew a curve like this.
In BJT's case, you drew a curve like this.
Didn't you?
Who is Input?
Input K.
This curve is drawn like that.
You can draw it a little more to the other side.
When the depletion mode MOSFET is on, it starts conducting in the negative mode.
When it conducts and reaches a particular value,
when the negative voltage increases, the transistor can be turned off.
This is its output carrier.
Output carrier means, when Vgs is less,
Vgs is the gate source voltage.
If gate source voltage is less, there is no output.
See, when it is negative.
As the gate source voltage decreases,
ID is increased.
Current A.
If the input voltage is less,
if it is a large negative value,
the transistor will be turned off.
When it is turned off, it is cut off.
When it is cut off, can you see the output current?
No.
That is why there is no output current here.
See, when the negative voltage is less,
the output current increases.
See, when it is less, the output current increases.
When it is zero,
there is an output current IDSS.
Where did it go?
See, when it is zero,
the value ID is increased.
Then it goes up, up, up.
For example,
this is how we draw in common emitter configuration.
When it is marked here,
Vgs voltage decreases from a negative value.
Then it reaches a plus 1.
This is the output carrier of A.
This is MOSFET.
Depletion mode MOSFET.
This is a MOSFET symbol.
How many terminals does MOSFET have?
It has three terminals.
Gate.
Drain.
Source.
Didn't we see a substrate inside this?
Yes.
It is in this diagram.
This substrate is given here.
This is a terminal.
We don't use this normally.
That's why this substrate is drawn in this figure.
You can either use this symbol or this symbol.
When it becomes P channel,
this arrow will be out.
In P channel, arrow will be out.
In N channel, arrow will be in.
In N channel, arrow will be out.
In P channel, arrow will be in.
This is the symbol of a MOSFET.
Enhancement mode MOSFET.
Depletion mode MOSFET.
When it is an enhancement type MOSFET,
we don't see anything.
We don't see a channel.
The difference with the previous one is,
what was there here?
There was a channel.
Since there is a channel,
current flows from here to here.
It flows simply.
But what is not there in this?
There is no channel.
In enhancement mode MOSFET,
what is not there?
There is no channel.
Since there is no channel,
nothing happens.
Current conduction does not happen.
If Vgs is 0,
since there is no channel,
nothing flows through this.
Current conduction does not flow.
Only when a particular voltage reaches here,
current conduction happens.
Let me say one more thing.
The minimum voltage required to switch on a MOSFET
is called threshold voltage.
In the case of VGT,
we have said cut-in voltage.
Similarly,
the minimum voltage required in the case of MOSFET
is called threshold voltage.
Only when it reaches a threshold voltage,
we apply a voltage to a MOSFET.
When it reaches a threshold voltage,
what is formed here?
A channel is formed.
After the channel is formed,
what happens in the current conduction?
Normally, there is no channel in this.
The channel is enhanced in this.
That means,
a channel is formed.
That is why we call this type of MOSFET
as enhancement mode MOSFET.
The main difference is,
remember,
there is a channel in depletion mode MOSFET,
and there is no channel in enhancement mode MOSFET.
So,
only when we apply a positive voltage,
what is formed in this?
A channel is formed.
Current conduction happens.
Is it clear?
Yes, sir.
So,
look here.
Gate source voltage is a positive voltage.
What is given in the gate?
A positive voltage is given.
As part of the positive voltage,
positive charges come here.
When positive charges come,
what is there in this substrate?
There are electrons in the N.
Right?
What is there in this N?
There are electrons.
What is there in P?
There are holes.
Right?
Yes.
In P, there are holes.
In N, there are electrons.
So,
what is there in this and this?
There are electrons.
There are holes in this.
When we give a positive charge here,
everything here becomes positive.
When it becomes positive,
what does it attract?
It attracts electrons.
So,
what starts coming here?
Electrons start coming.
Right?
From here,
from here,
what does it start attracting?
When we give a positive charge here,
it attracts electrons.
Similarly,
the holes here,
what does it do?
Since it is the same charge,
it repels it.
So,
the holes here,
which we saw earlier in this figure,
the holes here,
what does it repel here?
What forms here?
The electrons inside this
deposit here.
So,
in this region,
electrons deposit here.
Such electrons,
when we give a gate source voltage
and a positive voltage,
electrons deposit here.
So,
what forms there?
A channel develops.
Is it clear?
Yes, sir.
When a channel develops like that,
what happens then?
When a current conduction happens,
electrons flow from here to here,
and current flows from the drain
to the source.
So,
current conduction happens.
Which work is this?
This is the work of an
enhancement mode MOSFET.
That is all I have said.
This is the V-I carry of an
enhancement mode MOSFET.
This is the V-I carry of an
enhancement mode MOSFET.
This is all you need to know
about the V-I carry.
Where did we start from?
We started from here.
Did you forget?
In the transfer carry,
we started from here.
At the same time,
normally,
the depletion mode MOSFET
is ON.
It conducts before zero voltage.
At the same time,
enhancement mode MOSFET
normally conducts
in OFF state.
Since it is in OFF state,
it does not conduct anything
at first.
It conducts only after
the channel comes.
That is why
Vgs is a positive voltage.
Do you see Vt here?
Vt.
Vt is the threshold voltage.
After this threshold voltage,
the transistor conducts.
In the case of enhancement mode MOSFET,
the threshold voltage is
a positive value.
In the case of depletion mode MOSFET,
the threshold voltage is
a negative voltage.
Now,
when you draw this carry,
you have to pay attention.
The carries are all the same.
The value written here
is different.
What is written here is
plus 3, plus 4, plus 5, plus 6.
Vgs should be a positive voltage.
It conducts only after
this positive voltage.
Here, you have to add
plus 3 and go up.
Where was it from the other side?
It was a negative value.
Negative 4, 3, 2,
1, 0,
minus 1, 0, 1.
It was like that.
Instead of that,
it was a positive value.
Is it clear?
Yes, sir.
I will share the notes.
You can group the notes.
Now,
the next
problem is
the pinch-off problem.
Pinch-off.
Pinch-off is the voltage
we give here.
Vgs is held
fixed at some value
such as 8 volts.
The voltage Vgs, gate-source voltage
is fixed at 8 volts.
If we increase
the drain-source voltage
of this channel,
the drain-gate voltage
called BDG
will increase.
By increasing the gain-drain voltage,
this channel
will be cut from here.
The pinch-off problem is
for such a problem.
Vgs is
a positive voltage
which is being conducted.
OK.
While conducting,
if we increase
the drain-source voltage
of this output,
the voltage in the drain
will increase
and the drain voltage
will reverse-bias it.
Thus, the conduction
will be cut.
This is called pinch-off.
Now,
the difference between
depletion-mode MOSFET
and enhancement-mode MOSFET
is the symbols.
For enhancement-mode MOSFET,
we have to draw a dotted line.
Earlier, we drew
a straight line.
For enhancement-mode MOSFET,
we have to draw
a dotted line.
For enhancement-mode MOSFET
and depletion-mode MOSFET,
we have to draw a straight line.
If it is a straight line,
it is a depletion-mode MOSFET.
If it is a dotted line,
it is an enhancement-mode MOSFET.
The reason for drawing a dotted line
is that
enhancement-mode MOSFET
does not have a channel.
If there is a channel,
the current conduction
will not be smooth.
This is the reason
for drawing a dotted line.
Now,
let's compare
enhancement-mode MOSFET
and depletion-mode MOSFET.
Gate voltage
is
positive or negative
in case of
depletion-mode MOSFET.
Normally,
the depletion-mode MOSFET
the channel will be present.
At the same time, when we come to enhancement mode MOSFET,
gate voltage is only when we give positive voltage,
the MOSFET will conduct.
Only when we give positive gate voltage, the channel is formed.
Only when the channel is formed, conduction occurs.
Normally, the MOSFET will be OFF.
There is no physical channel in it.
What is the channel doing?
It is inducing and forming the channel.
Okay? Is it clear?
This is the comparison between Depletion Mode MOSFET and Enhancement Mode MOSFET.
Next is the applications of Field Effect Transistor.
Where is the Field Effect Transistor used?
The application of a normal transistor is the Field Effect Transistor.
The Field Effect Transistor is used as an amplifier, oscillator and switch.

