It's Henry!
M-O-W-E-R-S!
Good morning.
I've got my Husqvarna 2346XLS
lawn tractor out today.
It's again another beautiful day.
I know that's not going to last.
Um...
Coming from the comments that I had
on this episode
where I fabricated the...
the top.
Well, the roof canopy
to this tractor.
Um...
A lot of you guys said you didn't like it.
You know? And that it looked hillbilly.
I'm a little hillbilly.
But I kind of agree with you.
I just put it together really quick
because at least it's a roof.
You know?
But you're right.
The rubber made bin tops
they look jigged.
You know what I mean? Messy too.
But I wasn't going to do anything
about it because
as long as it keeps the rain and the snow
out of my head, I mean, you know,
it serves it's purpose. Right?
But that's until I saw something
the other day while I was walking my dog
Bobo.
This is
one of those
you know, home offices.
If you had a home office, right?
And you have like carpeting.
You put this down so that
your office chair with the wheels
can roll around easily.
You know?
So, my neighbor across the street
actually down the block across the street
was throwing that out.
And I was walking my dog. I'm like,
Ooh!
Hmm.
Wheels were turning in my head. I'm going
that might make a much
better roof
for my canopy because
it's one clean sheet
already cut.
It's waterproof.
Which is the kicker, right?
I mean, I've got the Lucas Oil flag on there.
Once it rains or snows
it's going to get drenched, you know?
And probably erode pretty quickly.
This thing is one piece
and it has no gaps. You know what I'm saying?
I'll 86 the flag
altogether because
I honestly just put it there so it covers
the ugly bins, you know?
The bin tops.
So, you know what I'm going to do?
I'm going to listen to my subscribers.
You guys don't like it.
I don't like it.
Not to mention the fact that I got an alternative
the next day, you know what I mean?
So, it's a no-brainer.
I just got to do it. So, I'm going to remove
what I did.
So, how about it now, huh?
I got to tell you, it really was
kind of a pain in the butt because
some of the holes that were in there already
were different sizes. Some were
right through so I could put a bolt and a nut
right through it. Then there are some that just don't
fit through the hole. And then there are really
thin holes where I just tried to take
a screw to get it
in there, you know, just to hold it on there, right?
So, I had to do a couple of self-tapping
screws on the back. I figured
this part here was sticking out
a little bit, right? So, why
not bend it
down to almost make a valance?
You guys know what I'm talking about? Like an air dam
valance, whatever? Just to give it some
structure, especially when you
you know, if you
do a bend and you structure
it, it's stronger.
What do you think? Pretty good? I know
some of you guys are going to like this a lot more
than the bins, right?
A lot more than the bins.
Well, you know what?
I like it a lot more than the bins. And you know what
makes sense, right? What makes sense is
this is waterproof, weatherproof
you know, which is the entire point
isn't it? So, I'm
pretty stoked about it. I think it's much
better than before and I think you guys
probably think so too.
It kind of took me a while to do
it, to be honest with you, but I kind of
wanted to do it right, you know? Not
to slap it on like I did with the bins
but that's what it was. It was just
bin tops, you know, so I didn't really care.
But if I take my time
to do it, you know, and measure
correctly, you know, measure twice
cut once, whatever,
it came out okay. Also, this part here
was just like sitting
there, you know, like a stand.
It wasn't secured onto the dash at all.
And so
what I wanted to do was take
this apart and kind of make two
long rods that go down
and into here somehow, you know?
But it's welded on the bottom
here, so I figured
it's supposed to be like that, you know?
That's another thing I wanted to show you.
You guys remember
I got this acrylic thing when I picked
up that baby
or pet gate
see-through acrylic. I used one
piece for the divider in my van.
That worked out great. And then I
thought, hey, maybe I can make like a windshield
or something, right? The thing about the
windshield is, first of all, this isn't like
totally clear. It's kind of
damaged, you know what I mean? Scratched up.
And so
while it does protect
my face from the wind and stuff,
right,
in the snow and in the rain,
this will get all covered up
and I'd have to stop and wipe it
down and then it'll be smeared and stuff.
So it wouldn't be very clear because
unless I had windshield
wipers, you know,
and not only that, how would I
even secure it, you know? I'd have to
I guess I could just
I guess I could just zip tie it like that,
you know, and that would probably work,
but, you know,
since it doesn't have any kind of
like structure to it, you know, it'd be just
like flappy and floppy, you know?
That's a work in progress, I guess.
If I find something that might work for that, I might
think about it, but
for what
it is, you know, it looks
kind of like a golf cart now, doesn't it?
That's exactly it. You know,
I always wanted a golf cart, actually, you know?
Something that I just drive around the neighborhood
and stuff? That'd be fun.
But that's pretty good.
I like it, you know, and
I want to thank you guys
all very much for suggesting
that I change
it up because
you're right. It looked ghetto
before, looked hillbilly,
jigged, you know, rigged up.
This looks much better.
Like I said, it looks like a golf cart now,
which I like.
I always wanted a golf cart.
That's pretty cool.
My friend Robert Nighthawk also said,
hey, why don't you try to fabricate that bracket
onto your blue bayou?
I thought of that. I really did.
Because I would like this
on my blue bayou. That would make sense
because I'm snow plowing, you know what I mean?
But looking at the angle of the rear
with the blue bayou,
the gas tank is right there,
you know, and it's just
too wide.
That bracket is just that much, you know?
So if I wanted to stick it in there
like that somehow, I'd have to do some
prying of the gas
tank and also to secure it
on there.
You take a risk of puncturing the gas tank,
you know what I mean?
While I would like this for the blue bayou,
it's just too much fabrication
to get it on there, you know?
So I'm just going to keep it on here.
Hey, who knows?
If this engine and transmission
are good,
maybe I'll put the snow plow on here.
I'll get a snow plow and put it on here.
But then what would I do with the blue bayou,
you know what I mean?
Anyway, thanks for joining me on
the Canopy
Fabrication Revisited
Part 2. Hope you enjoyed
the episode. We'll see you guys next time
on Mowers and Blowers.
Hey, if you guys enjoyed the video,
remember to give me a like.
Also, comment below.
Subscribe.
Remember, it doesn't cost anything
to subscribe. It's free, right?
Also,
hit that little bell. That way you'll
get post notifications whenever there's a new video
and you won't miss out on any of them.
Remember to follow my
Instagram and Facebook
as well as, if you'd like to
donate a dollar or two,
paypal.me
Mowers and Blowers really appreciate all the support.
Also, to keep the videos
coming every day,
support the channel.
Bye.
Hey Henry, see you guys
next time on Mowers and Blowers.