CRYSTAL OSCILLATOR || ECT281 ELECTRONIC CIRCUITS|| KTU MINOR
Oct 4, 2023
Crystal Oscillator is basically a tuned circuit using a piezoelectric crystal.
Piezoelectric crystal as the resonant tank circuit.
Piezoelectric crystal exhibits piezoelectric property.
Piezoelectric crystal produces corresponding electrical signals.
Piezoelectricity is the ability to transform mechanical deformation into electrical charge and vice versa.
If a piezoelectric crystal is squeezed, it develops voltage.
If a voltage is applied across it, a change in mechanical dimension results.
Piezoelectric material is called piezoelectric material.
Quartz crystals are used for oscillating purposes.
The resonant frequency of a crystal oscillator is the frequency at which the oscillator will work.
The resonant frequency is the frequency at which the crystal oscillator oscillates.
The quality of a crystal oscillator depends on the resonant frequency and the quality of a crystal.
Crystal dimension, how the surfaces are oriented with respect to its axis, how the devices are mounted.
Based on that, the resonant frequency and quality of the crystal will change.
C represents the covalence.
R represents the viscous damping factor.
C' is the inter electrode capacitance between electrodes.
L represents the mass of the crystal.
If we neglect the resistance R, we can say that the crystal is purely reactive.
The effective reactance of a reactive crystal is Jx is equal to J omega L.
The corresponding resistance value of the inductor is J omega L.
The corresponding resistance impedance of the capacitor is 1 by J omega C.
The corresponding impedance is J omega L plus 1 by J omega C, which is parallel to 1 by J omega C.
Therefore, J omega L plus 1 by J omega C into 1 by J omega C' all divided by S.
If you find it difficult to understand, you can skip this part.
You can skip this part and read this equation.
If you can write this, please do so.
Since the derivation part is not important to you, you don't have to worry about it.
So, we get the equation of Jx in this way.
We define two frequencies here.
One is the series resonant frequency and the other is the parallel resonant frequency.
This is important.
Series resonant frequency and parallel resonant frequency.
Series resonant frequency is the frequency at which the reactance becomes zero.
We can write omega is equal to omega s as the series resonant frequency.
At omega is equal to omega s, what is zero?
The impedance is zero.
If the reactance Jx is zero, at what time will it be zero?
The numerator will be zero.
When the numerator is zero, Jx is zero.
We can write minus LC into omega square minus 1 by LC is equal to zero.
Since omega is equal to omega s, we can write omega s square minus 1 by LC is equal to zero.
From this, we can write omega s square is equal to 1 by LC.
Fs is equal to 1 by 2 by root LC.
So, this is the equation for series resonant frequency.
We can write this equation.
Series resonant frequency is the frequency at which the reactance becomes zero.
Series resonant frequency is the equation for series resonant frequency.
Fs is equal to 1 by 2 by root LC.
Parallel resonant frequency is the frequency at which the reactance becomes infinity.
If the parallel resonant frequency is infinity, the denominator of this term should be zero.
If the denominator of this term is equal to zero, we can write it as parallel resonant frequency.
Parallel resonant frequency denominator is equal to zero.
We can get rid of this term.
Omega square is equal to C plus C dash divided by LCC dash.
Omega p square is equal to C plus C dash divided by LCC dash.
We can write C plus C dash as C plus C dash divided by C plus C dash.
Fp is equal to 1 by 2 by root LCC dash divided by C plus C dash.
In short, we can write it as 1 by 2 by root LC.
Now, keep this diagram.
Draw a curve like this.
Series resonant frequency is the reactance at the y-axis and the frequency at the x-axis.
Series resonant frequency is the point at which reactance becomes zero.
At this point, reactance becomes zero.
This is what series resonant frequency is.
When reactance increases and reaches this point, it goes to infinity.
Similarly, it goes to infinity here as well.
This frequency point is what we call as parallel resonant frequency, omega p.
Now, look at this.
If omega s is less than omega s,
we can say that reactance in this portion is of capacitive nature.
At the point where omega s becomes zero, reactance is zero.
At the point where omega s increases, reactance is of inductive nature.
Let me say this again.
At a frequency less than omega s, reactance is of capacitive nature.
At the point where omega s is equal to zero, reactance is zero.
At the point where omega s is greater than omega s, reactance is of inductive nature.
So, this is all about crystal.
This is all about crystal.
What is crystal?
We have Rochelet salt and quartz crystal.
Quartz crystal is used for oscillation.
The crystal we mainly use has a piezoelectric property.
Piezoelectric property is the ability to produce electrical signals corresponding to mechanical deformation.
The resonant frequency and quality of the circuit depends on the crystal dimension,
surface orientation and the mount of the device.
This is the equivalent diagram of a piezoelectric crystal.
If we omit the resistor, we can call the rest as reactance or reactive.
We have written the equation of reactance.
We have defined two frequency terms, series resonant frequency and parallel resonant frequency.
In series resonant frequency, reactance is zero.
In parallel resonant frequency, reactance is infinity.
The equation of series resonant frequency is Fs is equal to 1 by 2 pi root Lc.
The equation of parallel resonant frequency is Fp is equal to 1 by 2 pi root of L cc dash plus c plus c dash.
We can write it as 1 by 2 pi root Lc.
This is the variation of a reactance.
If it is less than omega s, reactance will be capacitive in nature.
If it is more than omega s, reactance will be inductive in nature.
If omega is equal to omega s, reactance becomes zero.
This is about the crystal.
When we use the crystal in the feedback path of the previous circuit,
we can make it work as crystal oscillators.
The crystal oscillator is an example of an RF oscillator.
We can connect the crystal in various modes.
We can connect it in series resonant mode or parallel resonant mode.
In series resonant mode, the crystal produces 180 degree phase shift.
Similarly, the common emitter amplifier produces 180 degree phase shift and total 360 degree phase shift.
If the impedance in the feedback is less or if the amount of feedback is large,
we connect it in series resonant mode.
Similarly, if the impedance is maximum and the amount of feedback is minimum,
we connect the crystal in shunt mode.
The crystal is connected based on the application.
We can connect it in series resonant mode or parallel resonant mode.
In series resonant mode, the crystal is connected in series.
In that case, the impedance produced by the crystal is low impedance path.
When the impedance is low, the amount of feedback is large.
For such applications, we use the crystal in series feedback mode.
Next, we can connect the crystal in parallel output mode.
When the crystal is connected in parallel resonant mode,
the amount of feedback is minimum.
The impedance produced by the crystal is maximum.
In parallel resonant frequency, the impedance is infinity.
In series resonant frequency, the impedance is zero or minimum.
We can connect the crystal in series resonant mode or parallel resonant mode.
We need to draw these two figures properly.
We do not need this. We need these two figures using FET.
We need to draw these two figures properly using BJT.
The specialty of the crystal oscillator is its stability.
The frequency of oscillations produced by it is stable.

