Một tuyệt phẩm bể cá thác nước từ xi măng

Khu Vườn Ngọt Ngào 365
6 người theo dõi
4 thg 10, 2023
Ngoài cách làm cây bonsai từ cây thật, hôm nay, chúng mình sẽ hướng dẫn các bạn cách làm cây bonsai theo một cách đặc biệt và khác lạ. Đó là cách làm cây bonsai và bể cá từ xi măng. Và nhìn từ xa, cây bonsai và bể cá của chúng mình trông như thật.
Cùng theo dõi video và tự làm cho mình một bể cá cây bonsai ngay tại nhà nhé!
----
Nguyên liệu: xi măng, sắt, cát, máy cắt, chổi quét, ống Tio, ống nhựa mềm, gạch hoa, gạch đỏ, gạch xi măng mini.
Màu sơn: xanh đậm, đỏ, vàng, xanh nõn chuối
----
Bấm subscribe để cập nhật những video mới nhất về bể cá, thác nước và chia sẻ với chúng tôi cảm nghĩ của bạn nhé!
-----
Xem thêm các ý tưởng sáng tạo khác tại đây: GJW
Hello everyone who is watching the video
If you like the bonsai tree colors in the fish tank, you will not be able to ignore the bonsai tree colors made from this cement.
Let's watch together
First, I poured the bottom of the tank in the shape of a Japanese character and added a wire to make the bottom of the tank more secure.
After 24 hours, when the bottom was dry, I removed the frame.
I used a wire to build the frame of the tree and used a red wire to rotate along the frame.
Next, I poured the cement and put the Tio tube along the body of the tree.
Then I poured the cement and made the shape of the bonsai tree.
I made the shape of the body of the tree growing in the rock.
While waiting, I turned it into a base and divided the inside of the base into two holes.
I poured cement on both sides of the base and made the shape of the outside of the base.
Now I cut the flower stem into the shape of a bud and drilled the holes on the flower stem.
Next, I cut the plastic tube into pieces and put it in the holes.
Then I continued to make the shape of the tree.
Now I put the flower stem on the tree.
I built a mini brick around the flower stem and poured cement.
I put a flower stem on a tree to make a water tank.
Now let's move on to the decoration.
I used dark green for all the bonsai trees.
Then I used yellow and orange to make the body of the tree more prominent.
Next, I painted the outside of the base with light green.
And brown for the mouth of the base.
Then I installed the pump in the base.
I pumped the water into the base for 3 days.
After 3 days, I pumped the water out of the base.
Then I went to the market to plant trees.
You can plant any kind of tree you like.
Then I spread the bark under the base.
I pumped new water into the base and released the fish.
So the fish tank of our completely fresh bonsai tree is complete.
Just look at our bonsai tree looks like real, right?
Don't forget to click follow, share and leave comments below for us to know.
Thank you for watching the video.
Goodbye and see you in the following videos.
