Con lắc lò xo nằm ngang - Vật Lý 12 - Thầy VNA

Thầy Vũ Ngọc Anh - Chuyên luyện thi Vật
8 followers
Oct 3, 2023
Hello everyone. Today, I will show you a new lesson in our science, which is the horizontal spring.
And the next lessons will be the horizontal spring, then the vertical spring, then the horizontal spring.
But this is a basic lesson for you to understand the spring motion.
It will be the spring in front of you.
And this part of our knowledge is very basic, very basic, nothing difficult.
I just got used to the first formula for the spring motion.
And it will have a slightly new formula compared to the horizontal part you learned.
And this is also the horizontal part of the spring.
After this, we will learn a very long topic about the spring.
And it is also one of the most difficult lessons to learn about the vertical spring.
This part is related to a lot of level 10 knowledge when talking about force analysis and understanding force.
Understand? About the horizontal spring.
There. And we will have a related part of the spring with the horizontal spring.
That part is easy. You have learned very well with the teacher.
About the horizontal part, the circle of the spring, the single-axis, multiple-axis techniques in the spring motion.
When you apply it here, the first part will be easy.
But when it comes to the force part, everyone is the same.
The more you learn in the 10th grade, the easier the force part is.
Or the mechanical part, the force analysis is the same.
Understand?
In this part, those who start in grade 12 can understand that the first part is the horizontal spring.
Mixed with the spring spring.
But when it comes to the force and energy part, it will be a little more difficult to understand.
At that time, it needs your real nature, your real ability when you have finished grade 10.
And of course, the teacher will teach you from the beginning.
Even those who have not learned grade 10 about force or energy.
When learning about force, energy and spring, the teacher still reminds.
But it will not be as excellent and as good as those who have learned grade 10, grade 10 standard.
But you just calm down.
Then we will learn better and newer knowledge.
Because when mixed with the spring, the spring is very difficult.
At that time, everyone is the same.
And we will have a standard.
Right from the first lessons, you watch carefully, hold the theory tightly.
Then you can develop the difficult lessons.
These first lessons are like the Great Wall.
The Great Wall, guys.
So let's watch carefully.
Teacher teaches.
Note each word, each word one.
Don't miss any word.
Because every word is an important word in the Great Wall.
OK.
We go to part 15, which is the structure of the horizontal spring.
This part is basic, but very important.
Because it is the foundation, guys.
Our horizontal spring spring.
There is a head fixed to a wall.
Placed on a flat surface.
Done yet?
And it will move without friction.
I'll talk about this later.
Hear that?
Get rid of friction.
And the rest of the head is attached to an object with a mass of M.
And the structure of the spring now.
I will include a spring with a hardness of K.
The unit is Newton per meter.
And an object with a mass of M.
The unit is kilograms.
For example, 500 grams, I have to change to 0.5 kilograms.
Done yet?
At this time, this is called a spring.
A fixed head.
A head attached to an object with a mass of M.
The object is placed on a flat surface.
It is called a horizontal spring.
Done yet?
And you don't have to prove that this spring will move.
The computer will recognize it for us.
Guys.
I don't have to prove it.
Only those who go to good students need to prove that the spring moves.
And you have to understand that force is the cause of the speed of the object.
And make the object move.
So we will always have a way to stimulate the spring to move.
How?
We can pull.
It is in a natural position.
Natural spring.
The spring is not deformed.
We pull the object out.
Let the spring move.
Then we let go.
At this time, when the spring moves.
It generates momentum.
And the momentum will help our spring return to its natural state.
And when it pulls the object back like that.
It will make our object move evenly.
Push, move, push, move.
In the process of moving.
The spring will move, then push, push, then move.
And so on.
It will move evenly around its balance position.
So here you have to choose an angle.
See?
Choose an angle in line with the spring's axis.
This is the initial position.
It is the natural position of the spring.
See?
There.
It is the position where the spring does not deform.
On this side is the push form.
And this is the move form.
Look at the bottom.
This is the OX axis.
And this is the Y-axis.
See?
And here you have to prove to the teacher that the natural position is the balance position.
See?
The natural position of the spring is the balance position of the spring.
Now.
Remember this.
What is the balance position?
The balance position is the position where all forces are applied to the object by zero.
See?
Remember that with our spring spring like this.
There are several forces applied to the object.
I draw below to make it easier to see above.
This is in the spring's position.
See?
There are all three forces that are applied to this object.
The first is gravity.
Okay?
Next is the force of the spring.
The first point here is more reasonable.
See?
The force of the spring.
And for example, the spring is pushing.
There is another force.
It is the force of the spring.
To resist deformation.
The force of the spring.
It's like the 10th grade that you learned.
There.
In the process of the spring moving horizontally, there are three forces that are applied.
But set at the balance position.
Pay attention.
Set at the balance position.
The balance position is the position where all forces are applied to the object by zero.
Then at the balance position, our gravity plus the force of the spring plus the force of the spring.
Now it must be equal to zero.
Because at the balance position, the force is zero.
Okay.
But these two forces are divided for each other.
Or in other words, they are divided horizontally.
Because the force is perpendicular to the horizontal.
Got it?
This is the gravity and the force are divided for each other.
10th grade students, remember?
So from here, it turns out that at the balance position, the force of the spring is zero.
There.
And the force of the spring is zero.
It can only be in what position?
Natural position only.
The force of the spring will be zero when it is in the natural position.
Because the force of the spring is generated when the spring deforms.
It has the effect of resisting deformation.
If there is no force of the spring, it means that the spring does not deform.
That is, the object is in the natural position.
Got it?
This is grade 10th grade students.
Right?
So it proves that with a spring that is perpendicular, the natural position is in the balance position.
This is very special.
It is different from a spring that is perpendicular.
A spring that is perpendicular has two different positions.
So the exercise about a spring that is perpendicular is much more difficult.
Got it?
This proves that they are in the same position.
Okay, guys?
At this time, our object is like a point.
Okay?
When stimulated, it will move in a constant motion.
Move around, go back.
Its balance position is the natural position of the spring.
Okay?
And I have to admit that our spring is in a constant motion.
Okay?
But it must be in an environment that does not have friction.
Got it?
That is, it does not have friction with the plane.
And does not have friction with the air.
That is, in ideal conditions.
And if it has friction, it is no longer called a constant motion.
But it is called a stationary motion.
Okay?
So from here, you will learn a formula for me.
When it is in a constant motion, you have to pay attention to its original value.
Got it?
Let me show you.
Our spring will move in a constant motion with the original value of omega divided by k.
This is the first formula that you will learn in today's lesson.
Got it?
The original value of the spring is omega divided by k over m.
This original value is the original value of the constant motion.
It does not depend on how the spring is stimulated.
But it depends on the characteristics of the spring.
I can write it out for you.
Got it?
Omega depends on the characteristics of the spring.
Depends on the structure of the spring.
Depends on k and depends on m.
Does not depend on how it is stimulated.
Pay attention.
Depends on the structure.
So what do you learn from here?
When I have omega as the original value,
I can write down the constant motion of the spring and the constant motion of the spring.
Got it?
So you can write it down.
Got it?
Write it down.
The spring of the spring is T divided by 2P divided by omega.
Right?
So 2P divided by m divided by k.
The unit is the string.
And the value of F is 1 over T.
1 over 2P divided by k divided by m.
There are a lot of exercises on this part.
This formula alone is quite a lot.
That is, there is k and there is m, the value of omega.
Or there is k, there is m, the value of T and the value of F.
Got it, guys?
Here I just want to tell you that our spring is horizontal.
In the condition that there is no friction, it is stimulated with the original value like this.
Got it?
And it will be stimulated around its equilibrium position.
It is the position of the spring in a natural state.
And remember this formula, guys.
Usually, people choose the magnitude to explore the movement.
People follow the direction of the spring.
So on this side, got it?
On this side, the spring is horizontal.
On this side, the spring is vertical.
Go back inside.
This is not horizontal, not vertical.
Go back inside.
Horizontally, the spring is horizontal.
Vertically, the spring is horizontal.
I will go to the vertical and horizontal part of the spring in a moment.
Please pay attention.
Okay, this is the first part.
And there is a very important formula.
It will be applied to this whole lesson.
Very important, okay?
Okay.
Let's go to the second part of the lemma, which is the extension and length of the spring.
I just finished teaching you in the first part of the lemma.
Let me remind you a little bit.
The equilibrium position of the spring spring is its natural position.
This is what is very good about the spring spring.
The equilibrium position converges with the natural position.
Found it?
So what is the importance of equilibrium?
Equilibrium angle is equal to the natural position.
You should remember this sentence.
Another that nobody knows,
Equilibrium angle is equal to the natural position.
So you see here, I take a very basic example, that is, I give the degree of x is 5 cm.
There, the number 5 shows what?
The number 5 shows that it is leaving the equilibrium position.
It separates the equilibrium position by a segment of 5.
But the number 5 also shows that it is a number greater than 0, right?
That is, it has a square degree, a square degree, that is, it lies on the right hand side of the x-axis like this, the x-axis, right?
Here, I take an example, the degree of 5 is the object here yet?
Then, the degree of 5 means that it separates the equilibrium by a segment of 5.
But separating the equilibrium by 5 also separates the natural segment of 5.
Because the equilibrium position coincides with the natural position yet?
When separating the natural position is 5, it will have two states, that is, 5-point or 5-shape.
But on this side yet?
It is out of the first direction is not deformed.
This is not deformed yet?
KBD is not deformed.
Go out here yet?
It is a 5-shape spring.
Here, I can always say that when the degree of 5, the spring is also a segment of 5 cm.
The important thing is that I choose the diagonal in the direction of the spring segment.
So, if the degree of the diagonal, the spring will be segmented.
And vice versa, if I take the x-axis of the teacher yet?
By 3 cm.
That is, the degree of 3 cm, that is, in the negative part of the x-axis.
That is, back on this side yet?
The left hand side of the O.
This is not deformed, not segmented, not segmented.
Back on this side yet?
It is a spring segmented.
At this time, the degree of 3 is a spring segmented 3 cm.
The important thing is to choose the diagonal, choose the axis.
So, similarly, if you choose the axis like this,
but the teacher thinks that the spring is segmented 4 cm,
then x is equal to negative 4, the spring is segmented 7 cm,
then x is equal to what? x is equal to negative 7.
That is, if you choose the axis like this,
the degree of the diagonal is the spring segmented,
the degree of the negative is the spring segmented.
It's very easy, guys.
And you can always set up the sum.
When it is more difficult to analyze the sum,
you write down the sum as follows.
Sum.
Here.
In this sum, you have to understand a little bit about the circle of mass.
Here. Sum.
If the degree of the diagonal is like this,
then the spring is segmented.
Done yet?
The degree of the negative is the spring segmented.
But you have to understand that when you choose the axis like this,
there are difficult exercises that trick you.
It turns the axis upside down,
then the degree of the negative is the spring segmented.
Got it?
The degree of the negative is the way to choose the axis,
but people usually choose this way.
But there are tricks, guys.
And what about the degree of the zero?
The degree of the zero is that the object is always in a balanced position.
It's always in a natural position, right?
Then the spring is not pointed and not segmented.
Done yet?
So you know that in summary,
in a cycle,
let's summarize,
in a cycle.
There.
In a complete cycle,
that is,
that is, good-looking, beautiful,
then in a cycle,
imagine the method of the circle of mass taught by the teacher.
There is a circle, right?
Half on the right hand side is the needle,
half on the left hand side is the spring.
The circle of mass has four quarters,
in which there are two angles for the ratio of the needles,
two angles for the spring,
ok?
In a cycle,
there is half the ratio of the needles,
half the ratio of the springs.
In other words, in a scale, there is a half scale that is flat, and a half scale that is flat.
In a scale of a oscilloscope, there is a half scale that is flat, and a half scale that is flat.
This is set in a whole scale.
In general, the amplitude is flat, the pitch is flat.
For example, from here, it goes out, it is flat, then it turns back, it is also flat, it is a half scale.
It goes on, here is the pitch, here is the pitch, here is another half scale, it is flat.
This is the summary you have to remember.
Later, I have some calculations about the time of the oscilloscope, or the frequency of the time of the scale.
If you set it, in a whole scale, the frequency of flat and flat is 1 divided by 1, right?
But now the scale is not whole, so what?
It does not go all the way to one scale, or it goes all the way to many scales, or all the way to about 3.4 scales.
Later, I will go into the details, I will know.
And remember this summary, okay?
With this kind of calculation.
Next, now I have finished the simplification of the oscilloscope.
I will go to the length of the oscilloscope.
I remember the length of the oscilloscope, I have to pay attention to the initial length.
The initial length is L0, which is in the natural state.
The natural length is L0.
The natural length of the oscilloscope is L0.
Done yet?
But this is the length when the object is not moving.
If the object is moving, then with a flat oscilloscope, the length is greater than L0, greater than natural.
With a flat oscilloscope, the length is smaller than natural, L is smaller than L0.
Right?
So what is our general formula?
Here, I will give you any length formula.
Now, there is any length formula.
That is, at any position, our L is equal to L0 plus X.
This is the formula for any length.
Now, let's think about why there is this formula.
There are many ways of thinking.
The easiest way of thinking is to look at it.
For example, from here to here is L0.
From the point to the natural position is L0.
And this is the natural sky.
But at this time, for example, the oscilloscope is 5.
Or specifically here, the oscilloscope is 8 cm.
So its length will be L0 plus 8.
Got it?
This X is the distance of the object.
But because the position is balanced, it coincides with the natural position.
So this X itself is also the deformity of the object.
If X is 5, then it is 5.
If X is 3, then it is 3.
Here, L0 is its original length.
And this X is added to the degree of deformity.
If X is square, then the deformity is square.
Then L is greater than L0.
But if X is negative, then the deformity is negative.
L is smaller than L0.
This is the easiest way of thinking that you can imagine.
Got it?
This is L.
L is natural.
And plus the degree of deformity is L.
This degree of deformity depends on X.
X is square, then it is square.
X is negative, then it is negative.
Got it?
There is one more way for you to understand this formula.
You don't have to care about the length of the spring anymore.
Look at this.
Our object will rotate around the balance position.
See?
This is the position.
It will have an angle, which is X.
It will rotate around the O-axis with the distance, which is X.
So this angle is L0 plus X.
Because this angle is the length of the spring at that time.
It is a bit difficult to understand that way.
But I understand this.
This is L.
L is natural.
Plus the degree of deformity.
So X is the degree of deformity.
Got it?
Done.
This is L.
And what is X?
Look at this.
X in the process of oscillation.
It runs from the negative to the positive.
We just recognized that our spring is a mass of oscillation.
And when it oscillates, the magnitude changes from the negative to the positive.
Now we have the magnitude and the magnitude of the spring.
Let's see.
L0 is equal to L0 plus A.
L0 is equal to X0.
X0 is equal to A.
At this time, the object will rotate around the balance position.
It will have a lot of oscillation.
Next is L0 minus A.
Got it?
L0 minus A is equal to L0 minus A.
Got it?
So you can see that with a calculation,
it gives L0, it gives L0,
you get L0 and A.
What else?
This is for Lmax and Lmin.
One, two equations.
L0 and A.
With Lmax and Lmin, it's done.
And there is a formula that you often see.
I don't like this formula very much.
This is the formula of A.
What kind of A?
You take Lmax minus Lmin.
L0, L0, that's all.
You have to divide it in half.
Because Lmax minus Lmin is 2A.
Got it?
So our A is equal to Lmax plus,
I'm sorry, minus Lmin.
Divide it in half.
This is the quadratic formula.
And I don't like this formula.
I like the following formula.
I like this formula.
They look the same,
but they are completely different.
They are different from the equation.
This equation is according to mathematics.
And this is according to physics.
Let me show you.
That's Lmax minus Lmin is 2A.
Look at this.
Are they the same?
They are different.
Why?
Look at this.
In the process of motion,
the length of the spring will change.
Right?
In the process of motion,
the length of the spring will change.
It will change from the shortest spring
to the longest spring.
And from the shortest to the longest,
it will go from the north to the south.
No more motion.
Can you see it?
From the shortest to the longest,
no more motion.
That's 2A.
Right?
Or from the shortest to the longest,
it will go from the north to the south.
That's 2A.
Got it?
I like this formula more.
And this formula is a quick formula.
Just follow this.
Done?
This part is quite easy.
But I want you to observe the phenomenon.
That is, you have to learn physics to feel
or imagine the movement in your head.
In your head,
the spring is moving,
moving back and forth.
Got it?
Then you will understand it for real.
Can you see the following sentence?
A spring is horizontal,
its hardness is 100N per meter,
M is 400g,
and P is 10,
is equal to 10.
Sentence A.
Calculate the frequency and angular frequency
of the spring.
Pay attention to the formula of the spring.
What is it?
The formula of the spring is
T is equal to 2P.
Take P is equal to 10.
But with the weight of M,
divide it by K.
But pay attention to M,
we have to change the unit to kilogram.
2 times 10,
but with the weight of M is 0.4.
Divide K is 100.
We get the spring
is equal to 0.4 seconds.
Calculating the spring,
the spring,
P is equal to 10 is normal.
Try to press the button.
Our P is 9.86.
Divide it by 10,
people usually put it like that,
it's beautiful.
Do you understand the problem?
It's beautiful.
So, what is the frequency?
This is a very common frequency,
extremely common
with the spring.
I always remember this frequency.
F is equal to 2.5.
Omega is equal to 5P.
See?
Radian on the string.
Extremely common and beautiful frequency.
Remember from now on.
Try to press K divided by M.
100 divided by 0.14.
It's 5P.
5 times 10.
Alright.
If we increase the unit to 500 grams,
at first it's 400 grams,
increase to 500 grams,
it's 900 grams.
What is the new frequency?
Press it.
2 times 10,
but with the weight of M is 0.9.
Divide K is 100.
Alright.
It's 0.6 seconds.
This is easy.
Alright.
Next.
C, D, E, F are the same.
If M is increased 4 times,
and K is decreased 9 times,
how does the frequency change?
Look carefully at the ratio.
Look at me.
T is the ratio with the weight of M divided by K.
See?
I teach you how to do the last 4 questions.
Press the computer.
Press the weight.
Press the number.
Press the weight.
Press the number.
The number is M.
M is increased 4 times.
Increase is the factor.
1 times 4.
Increase is the factor.
K is decreased 9 times.
The number is decreased 9 times.
Decrease is the factor.
1 divided by 9.
Got it?
Press the computer.
The weight of 1 times 4 divided by 1 divided by 9.
That's it.
Is it equal to 6?
6 is greater than 1.
So T is increased 6 times.
Compared to the beginning.
T is increased 6 times.
Compared to the beginning.
That's it.
Actually, we don't need to use K and M.
Forget K and M.
Just use K and M.
It's a new formula, guys.
I don't want to make a new example.
That's it.
Next, question D.
If M is decreased 3 times and K is increased 12 times.
Press the number.
The weight.
The number.
Decrease is the factor.
1 divided by 3.
Increase is the factor.
1 divided by 12.
Press the computer.
The weight.
1 divided by 3.
Below is 1 divided by 12.
Is it equal to 1 divided by 6?
That's it.
6 is greater than 1.
So T is increased.
1 divided by 6 is smaller than 1.
Got it?
So T is decreased.
T is decreased 6 times.
That's it.
Decreased 6 times.
Pay attention, guys.
6 is increased 6 times.
1 divided by 6 is decreased 6 times.
That's it.
6 is 1 divided by 6.
1 divided by 6 is decreased 6 times.
Question E.
If T is decreased 10%, how does T change?
In question E, people don't talk about K.
K doesn't change.
And you're right.
T is proportional to the weight of M.
Because K doesn't change.
Got it?
T is proportional to the weight of M.
Press the back button.
Press the weight of M.
In the beginning, M is 100%.
But it's decreased 10%.
So M is only 90%.
In the weight of M, it's only 90%.
Press the weight 90%.
I press the equal button.
When I press the equal button, it's like this.
It's 0.948.
Got it?
0.948.
I take this number and multiply it by 100.
It's 94.8%.
Got it?
94.8.
Actually, it's 86%.
Let's say it's 8%.
Got it?
You have to understand this.
This is T.
T is proportional to the weight of M.
The weight of M represents T.
This is T.
T is only 94.8%.
That means T is decreased.
Because when M is decreased, T is also decreased.
But when M is decreased 10%,
how much T is decreased?
Take 100 minus this number.
100 minus answer.
How much is it?
Take 100 minus 94.8.
If you take it minus 1%,
you have to take 1 minus it.
If you are understanding 94.8,
you have to take 100 minus 94.8.
It's decreased 5.13%.
Got it?
This part is difficult.
It's not easy.
It looks difficult.
Alright.
If M is decreased 10%,
T is decreased 5.13%.
It's quite difficult.
Next.
F.
M is increased 8% and K is decreased 12%.
Both K and M have to be equal.
It's proportional to the weight of M over K.
Got it?
M is increased 8% over the word.
That's 108%.
This is the last question.
There.
Is it increased 8%?
The word is 108%.
Is it decreased 12%?
How much is it?
It's 88%.
100 minus 12 is 88%.
How much is it?
It's 108 divided by 88.
OK.
It's 1.11107.
Write it as 1.11.
Got it?
1.107.
Write it as 1.11.
Got it?
This number is 100.
Got it?
111%.
Alright.
111%.
This is less than 100%.
So T is decreased 5.13%.
But this is more than 100%.
So T is increased 11%.
Note that T is increased 11%.
Of course, the number is a bit random.
You have to make it round.
Quite a lot.
But this is the essence according to the ratio.
You have to pay attention to this part.
It's quite uncomfortable.
OK.
