Kupfer + Acetylen ist eine gefährliche Kombination [𝟰𝗞] | JJChemistry

JJChemistry
4 Abonnenten
14 Videoaufrufe·03.10.2023
Werde Kanalmitglied und unterstütze dadurch meine kostspieligen Experimente - zusätzlich profitierst du von coolen Vorteilen☺️:
Kanalmitglied werden und exklusive Vorteile erhalten:
https://www.youtube.com/channel/UC1fXMFG158qpiCUgw4qSX8Q/join
Heute zeige ich euch, warum Acetylen nicht mit Kupferrohren verwendet werden darf. Es besteht die Gefahr, dass instabiles Kupferacetylid / Kupfer(I)-acetylid / CuC2 ensteht.
For a previous video I bought a hydrogen bottle and hydrogen is an extremely toxic gas.
In the course of this I also dealt with other extremely toxic gases and I came across ethene or acetylene.
Yes, and by that I mean exactly the acetylene that is used for example for milk cans.
And now comes the exciting arc here to the video.
Acetylene should not be used in combination with copper pipes.
And that's where it gets interesting. Why shouldn't you do that?
The reason for this is relatively simple. There is a risk of forming copper acetylene.
And copper acetylene is an instable substance that can crack when touched or ignited.
Fortunately, I have a few copper cables lying around here, leftovers from my laboratory construction.
And from that we will make copper acetylene ourselves today.
I have disassembled the cable and noticed that one strand will be enough.
There is really an incredible amount of copper in cables.
Based on scales, this single strand weighs 6.15 grams. More than enough for the whole experiment.
So I can safely put the rest back and use it for other projects.
For today's synthesis, a few chemicals are necessary. There are five of them in total.
33 milliliters of smoking acid, 16 milliliters of hydrogen peroxide 35 percent, 6.3 grams of sodium sulfate and about 5 milliliters of ammonia with a concentration of about 9.8 percent.
And last but not least, some calcium carbide.
The typical acid to dissolve copper would be salpetic acid.
I will not do that today to show another way.
This time I use a mixture of salt acid and hydrogen peroxide.
When adding 33 milliliters of salt acid, nothing happens.
The oxidizing effect of HCl is too low to oxidize copper.
When adding 16 milliliters of H2O2 or hydrogen peroxide, the reaction accelerates.
The hydrogen peroxide oxidizes copper to copper 2 plus ions.
This dissolution process of metals in acids is an oxidation process.
A short excursion that is not particularly important for the synthesis,
because due to the excess of salt acid chloride ions, the tetrachlorocopper 2 complex is formed,
which causes the beautiful green color.
In a few moments we will get copper 2 chloride from it, which is the more important part.
After about 2 hours, the copper is dissolved.
Now the solution has to be evaporated, so that no liquid is left.
I transferred the solution to a larger glass,
because the larger surface allows a faster evaporation of the solution.
It is important that as little acid as possible remains at the end,
because this would make the next reaction step difficult.
Something green-brown has now formed on the ground.
The green one is copper 2 chloride with crystal water,
and the brown variant represents completely dried copper 2 chloride.
The won copper 2 chloride is dissolved in water.
Here, too, it is very exciting to see what causes the different components of salt to have different colors.
However, this is such a complex topic that several new videos could be made about it.
At the beginning, the copper from the cable had the oxidation level 0, so it was charged neutrally.
After dissolving or oxidizing with hydrogen peroxide, we won copper 2 chloride.
The desired end product, which I mentioned at the beginning of the video, i.e. the copper acetylene,
however, requires copper in the oxidation level plus 1.
And to emphasize the irony behind it again,
at the beginning I had the oxidation level 0 and then I had the oxidation level plus 2.
And of course it was clear, now we need something in between, namely plus 1.
Everything else would have been too easy.
That means the synthesis has to go on.
In a second glass I prepare a solution for copper reduction.
To do this, I dissolve 6.3 grams of sodium nitrate in 100 milliliters of water.
This solution is now poured into the blue copper chloride solution.
The reaction takes a few seconds and various color changes occur.
First, a yellowish-brown solid is formed, which turns into something white when stirred.
The longer I stir, the brighter the solution becomes.
I had the suspicion that another 50 milliliters of water would contribute positively to the formation of the white solid.
In retrospect, I was not right with that.
Slowly, the solid sets off as a white drop on the bottom of the glass.
The white solid is copper 1 chloride.
In this connection, the oxidation level of copper is now, as desired, plus 1.
In terms of completeness, my calculations seem to have been wrong.
So I had to pour the suspension into a larger glass and add more sodium nitrate,
so that more copper 1 chloride is released.
After this step, the product must also be separated from the solution.
To do this, the suspension can simply be filtered.
Copper 1 chloride is an unstable solid.
In clartex, this means that it somehow converts to air.
First, the copper 1 chloride converts to copper 1 oxide.
And later, I'm really only talking about hours,
this copper 1 oxide turns into turquoise-basic copper 2 oxychloride.
But now we have white copper 1 chloride, and that's what it's all about.
I read that copper 1 chloride has an exciting effect, namely thermochromy.
Thermochromic substances change their color when temperature changes.
This means that if you make them hot or cold, they will change their color.
This is of course a very exciting property.
Copper 1 chloride must be heated to about 180 degrees Celsius.
To prevent that when heating, exactly what I mentioned earlier,
namely the conversion or even oxidation to other substances,
flows out of the hose on the left, which in natural gas argon suppresses everything in the air.
Unfortunately, I could not completely eliminate the unwanted brownish color with it.
Since I put the copper chloride directly from the filter paper into the petri dish,
water and acidic acid evaporate first.
Certainly not good for my camera.
But at a certain temperature, a bluish and sometimes deep blue color can actually be seen.
This is meant by thermochromy.
By heating the copper 1 chloride, the color changes from white to blue.
I will go into the phenomenon of thermochromy in a later video.
The process is reversible, which means you can reverse it.
Thus, the copper chloride discolors when cooled to white.
Let's continue with the synthesis.
Because the goal is still to make something chemically brilliant out of this copper wire,
maybe even explosive.
And at this point I will continue with a much smaller amount.
I don't think it's a good idea to produce a large pile of copper acetylene directly,
which can show explosive properties.
1.75 grams of copper 1 chloride is mixed with 15 milliliters of water.
In order to dissolve the by-products created during heating,
I add about 1 milliliter of smoking acid.
Then, and now comes the important part,
I add ammonia solution until the white swathes are completely dissolved.
Here, however, a deep blue color is noticeable.
I suspect that the soluble copper 1 chloride complex is formed.
My goodness, today I really have hard material for you.
The next step in the synthesis is the production of copper acetylene.
For this I need a small apparatus, which is necessary for combustion.
I dilute the deep blue solution with 400 milliliters of water,
so that the reaction can be better observed.
In the left piston, calcium carbide reacts with water to calcium oxide and gas-formed ethene.
Ethene is better known under the name acetylene,
and I have already made a separate short for this.
The acetylene gas flows through the hose into the solution,
and reacts with copper 1 ions to copper acetylene.
Copper acetylene is insoluble in water and has a deep red-brown color.
The product can now be obtained by normal filtration.
Right at the beginning of the filtration, I noticed the blue color of the filtered solution.
So it still contains a soluble copper complex,
and accordingly the reaction did not take place completely.
To do this, I would have needed more acetylene or a more effective combustion.
Copper acetylene can be handled for as long as it is kept moist.
It should not be completely dried.
After filtering, this is the final product.
And for my feeling, this looks like far too much.
To check the explosive properties, I dried a small amount in the oven.
The friction sensitivity of copper acetylene is 0.1 Newton, so almost 10 grams.
However, the reaction is, as you would not expect, rather sluggish.
In the second test pile, it looks different.
After all, a buffering.
It gets much more exciting when I hold the copper acetylene over a burner.
Not directly into the flame, but with a ceramic plate in between.
These are really very nice shots, so I won't say anything for a few seconds.
I have to admit that I have great respect for this connection.
However, there are a few more videos on YouTube about the reactionability of copper acetylene.
Feel free to take a look at what else this stuff does.
Many thanks to my channel members, without whom such long projects would hardly be possible.
The time required for long videos is really immense for me.
If you want to see more videos like chemicals and laboratory-required unboxings and behind-the-scenes,
feel free to take a look around the member area.
