Hướng dẫn phân biệt các loại chỉ thêu Hôm nay, mình hướng dẫn các bạn hướng dẫn phân biệt các loại chỉ thêu. Đây là công đoạn đầu tiên của những người làm thợ thêu tranh. Với cách phân biệt các loại chỉ thêu trước tiên chúng ta cần phân biệt xem đâu là chỉ gì? có bao nhiêu loại chỉ? Thông thường có hai dòng chỉ thêu chính là chỉ tơ bóng và chỉ cốt tông, ngoài ra còn có chỉ tơ tằm, chỉ len như vậy chúng ta đã xong cách vẽ lên Vải in Mẫu. Trên đây Tranh thêu Hằng Khoa đã hướng dẫn phân biệt các loại chỉ thêu đã xong. các bạn nhớ xem kỹ trên video nhé! Cảm ơn các bạn đã xem vdeo, nếu thấy video của mình hay hãy đăng ký kênh ủng hộ chúng mình. Kênh Youtube "Tranh Thêu Hằng Khoa" chúng tôi chia sẻ công việc thêu thùa với các bạn. Hy vọng sẽ có nhiều người biết đến nghề thêu truyền thống của Việt Nam và hy vọng sẽ mang lại nhiều giá trị hơn nữa cho cộng đồng và bạn bè gần xa.
Hello everyone, welcome back to the channel Nguyen Nghieu Theo.
Today, I would like to show you how to choose the right thread for the pattern.
Currently, there are many different types of threads.
This is a cotton thread.
It is made of buffalo wool, cotton, ribbon, and wool.
It is a modern thread.
This is a cotton thread from a factory.
This thread can be in different colors.
This is a cotton thread.
If you have a lot of buffalo wool, you can take a little bit.
If you have a little buffalo wool, you can take a little bit like this.
The most important thing is that when we cut the cotton thread,
the machine can only roll it up.
It will fade.
We try to make sure that the points of light and dark are the same.
They are even like this.
It is more difficult to cut the thread and the color of the wool.
If you hold it like this, it is easier to cut.
See, it's dark and light.
The wool of this thread is a bit long.
And we cut.
If we don't compare the light and dark colors,
when we weave, some have too many light colors, some have too many dark colors.
This is how to cut wool threads.
This is a cotton thread like this.
We usually use French PVC threads.
This thread has a number of points.
There are a lot of threads in the market that have numbers.
But the quality of this thread is the best.
These are the threads on the market.
They are also colored.
There are two ways to cut this thread.
First, we hold the end of the thread and pull it.
Because when the wool enters the thread, it follows the order.
So when we pull it, it doesn't get tangled.
And if we do a lot, we need to cut about 6-7 cm.
For 10 cm, we cut a medium length thread.
Not too long, not too short.
If it's too short, we have to cut a lot.
And if it's too long, when we pull it up, it doesn't go down, it gets tangled.
Next, this thread is the most popular.
This thread is also made into high-end fabrics, such as high-end fabrics.
This thread is usually made by To Chau.
It also has a color tone like this.
It's made from clay.
So it's just the color tone of clay.
It also depends on the tone.
There are tones that follow the pattern a lot.
It requires more brightness.
There are tones that are lighter in color and darker in color.
And these are just the right tones.
We just need to change the pattern from light to dark.
If we need a darker color, we have to choose a lighter color.
It will be different depending on the market now.
This needle is very soft.
It's a good needle, but it's a bit difficult to use.
If your hand is just doing a little heavy work, it will be scratched.
Actually, the needle is just a pen.
It's like a pen.
When we take off a shirt, it's like this.
This needle is also a very delicate needle.
And this is a fine needle.
This needle is common on the market.
There are a lot of needle patterns on the market.
This fine needle is easier to use.
There are more colors to choose from.
The important thing about this needle is that the needle is very delicate.
You can do it if you put your heart into it.
As you can see, from light to dark, it changes very slowly.
The most difficult thing for a needleman is to change colors.
Two colors, light and dark, are different.
But how do needlemen change colors slowly without thinking about colors?
The most difficult thing for a needleman is that.
If you want to go deep into the flower, you need a needle like this.
You have to use a needle.
This thread is very important.
For smaller flowers, we go from light to dark on a single thread.
So when we change colors, it's faster.
If it's dark like this, we have to go through the needle many times.
The advantage of dark is that when we go to larger flowers, the color changes faster.
For smaller flowers, we go to half of the thread and change the color.
The size of the thread depends on the size of the needle.
The size of the needle can be 9mm, 10mm, 11mm, or 0mm.
If we use a single thread, there are 6 small threads.
Each thread has 6 small threads.
This thread is only used to tie a tree or make a modern painting.
For modern painting, we can use more tape to add flowers or leaves.
Glue is also used in modern painting.
In the last lesson, I showed you how to distinguish and cut different colors.
So, I have just finished sharing with you how to cut flowers.
I wish you success with your favorite art style.
And I look forward to sharing your results with the public.
If you find this video helpful, don't forget to click like, subscribe to the channel,
and leave a comment below to encourage me to make more videos.
Goodbye and see you again!