ECT281 ELECTRONIC CIRCUITS ||REGULATED POWER SUPPLY || VOLTAGE REGULATOR || ZENER VOLTAGE REGULATOR
Oct 3, 2023
Hi all, today we are discussing about regulated power supply.
This is a basic block diagram of regulated power supply.
Regulated power supply is nothing but the DC power supply that we see in labs.
The DC power supply that we use to supply VCC is called regulated power supply.
Let us see the main blocks of a regulated power supply.
First, we have AC mains or AC supply.
This is the DC power supply that we use to supply AC to a regulated power supply.
Then, we have AC input.
What is the output that we get from AC input?
We get DC output.
What is the input signal that we get from AC input?
We get 230V and 230V.
We get 50Hz AC as the input signal.
Where does it go?
It goes to a step down transformer or a power transformer.
Where does it go?
It goes to a step down transformer or a power transformer.
The power transformer steps down the 230V and 50Hz AC signal.
We know that the next block is DC.
What should we do to get DC?
What should we convert AC into DC?
The first thing we use to convert AC into DC is a rectifier.
We have learned about a rectifier.
A rectifier converts AC input to pulsating DC.
It converts AC into pulsating DC, not pure DC.
A rectifier converts AC to bidirectional signal.
It converts bidirectional signal into unidirectional signal.
It converts AC into pulsating DC.
It converts bidirectional signal into unidirectional signal.
We have input 230V mains.
We step down the 230V.
The output is bidirectional.
There is a positive and a negative signal.
The output is unidirectional.
There is a positive and a negative signal.
The next block is a filter.
The filter reduces the AC components or ripples.
The filter removes the ripple components.
We are using filters to remove the ripple components.
The output of the AC is filtered.
The output is not steady.
But there is a slight variation.
The next block is a regulator.
The next block is a regulator or voltage regulator.
The voltage regulator is used in the final stage of a power supply.
In the final stage, it converts the fluctuating DC into steady DC.
This is the basic block diagram of a regulated power supply.
Today, we are discussing about voltage regulators.
A regulator is used in the final stage to give constant DC output irrespective of load variation.
What is the need for a voltage regulator?
What are its performance parameters?
The main function of a voltage regulator is to maintain DC output constant.
What should be kept constant?
DC output should be kept constant.
What should not be changed?
What should not be changed irrespective of load current, input voltage or temperature variation?
DC output should remain constant.
The main function of a voltage regulator is to maintain DC output constant irrespective of load current, input voltage or temperature variation.
What should not be changed?
The DC voltage of a voltage regulator should not be regulated.
What should not be changed?
The DC voltage of a voltage regulator should not be regulated irrespective of load current, input voltage or temperature variation.
Delta V0 is the total variation of a voltage regulator.
We can write the variation of load current as
Delta V0 divided by dou V0 divided by dou L into delta L.
This is the output voltage due to the input variation.
This is the output voltage due to the load current variation.
This is the output voltage due to the temperature variation.
The total output voltage due to delta L is
The total output voltage due to del V0 is
The total input voltage due to L is
The total temperature variation due to L is
Delta V0 is equal to
V0 divided by dou V i into delta V i, plus dou V0 divided by dou L, change in output
voltage with respect to change in load current, change in output voltage with respect to change
in temperature.
the output voltage with respect to input voltage, input regulation factor, output voltage with
respect to input voltage, output voltage with respect to input voltage, output voltage
with respect to input voltage, output voltage with respect to input voltage, output voltage
with respect to input voltage, output voltage with respect to input voltage.
So, we can say that for better regulator, the performance measures SV, R0, ST will be very very low value
Because there should not be any variation in the output, so we can say that it is very very low value
Next, we can classify voltage regulators as linear voltage regulator and switching voltage regulator
What is a linear voltage regulator?
A linear voltage regulator is an active control element or regulating element which is always continuously on
Similarly, whose impedance is varied to achieve the required regulation
Next, we can classify voltage regulators as linear voltage regulator and switching voltage regulator
A linear voltage regulator is an active control element or regulating element which is always continuously on
Similarly, whose impedance is varied to achieve the required regulation
Next, we can classify voltage regulators as linear voltage regulator and switching voltage regulator
Switching voltage regulator is an active control element which is always on and off
Next, we can classify voltage regulators as series voltage regulator and shunt voltage regulator
Variable impedance device in series voltage regulator is always connected in series with the load
Impedance is adjusted to the variation of the output
Shunt voltage regulator is an active control element which is always connected in series with the load
Depending on the variation in the input current, the current through the control element get varied to maintain constant current flow through the load
Shunt voltage regulator is an active control element which is always connected in series with the load
The property used in Shunt voltage regulator is called Zener breakdown
Zener diode is connected in reverse bias. When a particular voltage reaches the Zener diode, the Zener diode breaks down
Zener diode breaks down when a particular voltage reaches the Zener diode
Zener breakdown is utilized in Zener shunt voltage regulator
Zener diode is the regulating device
Zener diode is the regulating device which gives constant output
Let's see how it works
Input is increased
When the input is increased, the current is I
I
I'll see you in the next class.

