RC INTEGRATOR || ECT202 ANALOG CIRCUITS || EC205 || ECT 281 ELECTRONIC CIRCUITS || KTU
This video explains how RC Low pass Filter as integrator
This topic is also in the syllabus for
1. ECT202 ANALOG CIRCUITS:https://youtube.com/playlist?list=PL2UV2EJdMQmhbgPiP-dnVeRNTF0Pcfmpk
2. EC205 Electronic Circuits: https://youtube.com/playlist?list=PL2UV2EJdMQmiePALNs84TJUONtzApG9pp
3. CS 207 Electronic Devices and Circuits: https://youtube.com/playlist?list=PL2UV2EJdMQmh9Royg7s7B78IiWpou-lE0
4.ECT 281 Electronic Circuits ( Minor): https://youtube.com/playlist?list=PL2UV2EJdMQmiduKsGRgNFuu_MqB__HVpN
#circuits #ktu #ece #electroniccircuits
Hi all, today we are going to discuss about how low pass RC circuit works as an integrator.
We have already discussed about how high pass RC circuit works as a differentiator.
Today, we are going to see how a low pass RC circuit works as an integrator.
For that, let us first look at the circuit diagram of an integrator.
In an integrator, there is a resistor and a capacitor.
This is the circuit diagram of a low pass circuit.
Vi, Vo, current I.
This is the circuit diagram of a low pass circuit.
We have to prove how this circuit works as an integrator.
To prove how this circuit works as an integrator, we have to find out what is output and what is input.
If we write output as integral, we can say that output is the integral of input.
So, the circuit works as an integrator.
We are going to prove that.
Here, we are taking the output across the capacitor.
We have studied the equation of the voltage of the capacitor.
We can write the equation of the voltage here.
Vout is equal to 1 by C integral I dt.
The equation of the voltage of the capacitor is 1 by C integral I dt.
You have studied the equation of the current of the capacitor.
I is equal to C into dV by dt.
Integral I dt is equal to C into integral of dV.
Integral I dt is equal to C into V.
Integral of dV is equal to V is equal to 1 by C integral I dt.
This is how it works.
You just have to know this equation.
The equation of the output voltage of the capacitor is Vout is equal to 1 by C integral I dt.
When we derive the integrator and differentiator,
we have to take into account the resistance value of the capacitor.
The resistance value of R is much higher than the impedance value of the capacitor.
When we use the differentiator,
the resistance value of the capacitor is much higher than the impedance value of the capacitor.
When we assume this condition,
most of the input voltage will come across the resistor.
The equation of the current in the resistor is Vout divided by R.
The total current is Vout divided by R.
We can write equation number 1 and equation number 2.
Substitute 2 in 1.
Substitute Vout is equal to 1 by C integral I divided by R into dt.
The output voltage is the integral of the input voltage.
So, the circuit works as integrator.
What do these three represent?
The output voltage works as the integral of the input voltage.
So, we can prove what this low pass circuit works as.
We can say that it works as an integrator.
Now, we have derived the condition for working as a differentiator.
Similarly, we have to derive the condition for working as an integrator.
To derive the condition for working as an integrator,
we first derived the equation for the gain of a low pass filter.
I have already explained the equation for the gain of a low pass filter.
If you don't know about it, please watch that video.
We have derived the gain of a low pass filter.
I am substituting the equation for the gain.
The equation for the gain of a low pass filter is 1 divided by 1 plus j into 2 pi f r c.
If we want to act as an integrator or differentiator,
the phase angle of a circuit should be 90 degrees.
Now, we have to find the angle of V out by V in.
The angle of V out by V in is the angle of A plus IB divided by C plus ID.
It is tan inverse of B by A minus tan inverse of D by C.
This is how we find the angle of V out by V in.
Similarly, we can find the angle of V out by V in.
To find the angle of V out by V in, we have to find tan inverse of B by A.
In the case of a numerator, what is the position of B?
It is 0.
It is 0 divided by A plus IB.
A plus 1 is 1 plus 0 I.
So, it is 0 divided by 1 minus tan inverse of B.
What is the position of B?
It is 2 pi f r c divided by 1 which is equal to tan inverse of minus tan inverse of 2 pi f r c.
Instead of minus tan inverse of 2 pi f, what can be substituted?
Omega can be substituted.
Instead of minus tan inverse of 2 pi f, what can be substituted?
Omega can be substituted.
So, we can write it as omega r c.
Now, in the case of a differentiator, we have to work as an integrator.
What is the angle?
It should be 90 degrees.
If we substitute this angle as 90 degrees,
90 is equal to minus tan inverse of omega r c.
When we take tan, tan 90 will be infinity.
Infinity is equal to minus omega r c.
This is not practically possible.
So, we take a value which is close to this.
The angle is 89.42.
The value which is close to 90 is 89.42.
It is the same as we took there.
There is no change.
If you have studied high pass filter, you can write low pass filter using that.
There is no need to explain.
89.42 is the angle.
We are taking the value of 89.42.
When we take the corresponding tan value,
89.42 is equal to minus tan inverse of omega r c.
We are taking two tan.
When we take tan, we get this.
We get omega r c greater than or equal to 100.
What do we substitute instead of omega?
We substitute 2 pi f.
We get 2 pi f r c greater than or equal to 100.
What do we substitute instead of f?
We substitute 1 by t.
We get 2 pi by t r c greater than or equal to 100.
When we substitute 2 pi by t, we get r c greater than or equal to 100 by 2 pi t.
This implies r c greater than or equal to 16.
This is the condition for an r c low pass circuit to work as integrator.
It is very important to derive the condition for low pass and high pass.
It is very important.
The condition for an r c low pass circuit to work as integrator is r c greater than or equal to 16 t.
Let us look at another topic.
Let us look at how a r c low pass circuit or r c integrator works when a square wave input is given.
When we gave a square wave input to a r c circuit, we learned that the waveform we got was like this.
We got a triangular waveform.
But when we give a square wave input to an integrator, we will get a triangular waveform.
What do we get?
We get a triangular waveform.
Why do we get a triangular waveform?
The time constant here is r c greater than or equal to 16 t.
Time constant is a large value.
Since it is a large value, the capacitor charges and discharges linearly.
Since it charges and discharges linearly, what do we get?
It converts the square wave into a triangular waveform.
When a positive value comes, it charges linearly from the previous negative value.
When a negative value comes, it discharges linearly from the input.
When a positive value comes, it charges and discharges linearly.
When we give a square wave input to an integrator, we will get a triangular waveform as output.
Since r c is greater than or equal to 16 t, time constant is a large value.
Since it is a large value, the capacitor charges and discharges linearly.
So, we will get a triangular waveform as the output.
That's all for today.
We discussed how a low pass circuit works as an integrator.
I hope everyone understood today's class.
See you in the next class.

