ECT281 ELECTRONIC CIRCUITS|| KTU MINOR || SERIES VOLTAGE REGULATOR
Oct 3, 2023
Hi all, today we are going to learn about Transistor Series Voltage Regulator.
In the last class, we have classified voltage regulators as Series Voltage Regulator and Shunt Voltage Regulator.
What is Series Voltage Regulator?
In Series Voltage Regulator, regulating device is connected in series with the load.
If the load is connected in series, it is called Series Voltage Regulator.
If the load is connected in parallel or shunt, it is called Shunt Voltage Regulator.
This is a circuit diagram of a Series Voltage Regulator.
What is a Series Voltage Regulator?
The regulating device here is a transistor called Q1.
This transistor is the regulating device here.
This transistor is the regulating device.
It is connected in series with the output.
That is why it is called Series Voltage Regulator.
This transistor called Q1 acts as a pass transistor.
What does this transistor act as?
It acts as a series pass transistor.
What is the input here?
It is an input.
What is used to pass that input?
This transistor is used.
The current in the input is passed.
The operation to regulate the input current is done by this pass transistor.
You can see a transistor called Q2 here.
This transistor is called Error Amplifier.
This transistor Q2 is called Error Amplifier.
You can see a potential divider network here.
This is R1 and this is R2.
You can see a potential divider network here.
This is how this circuit works.
A Zener diode is connected here.
Let us see how it works.
This is how it works.
When the voltage is high, the voltage should be steady.
That is why it is called Voltage Regulator.
The input voltage increases.
What happens when the input voltage increases?
The input voltage increases.
When the input voltage increases, the output voltage increases.
What happens when the input voltage increases?
The output voltage increases.
What should we do with the output voltage?
We should regulate it.
The output voltage is the voltage coming from these two terminals.
When the output voltage increases, the voltage in this terminal increases.
The voltage here also increases.
When the voltage here increases, Vr2 also increases.
This is how the input voltage increases.
The output voltage increases.
When the output voltage increases, Vr2 also increases.
The voltage here is Vr2.
When Vr2 increases, the voltage here also increases.
The voltage here is Vbe2.
This is the base emitter voltage of the second transistor.
When Vbe2 and Vr2 are connected,
when Vr2 increases, Vz is the Zener voltage.
This is a constant value.
When Vr2 increases, Vbe2 increases.
When Vbe2 increases, when the voltage of the base emitter transistor increases,
Q2 starts conducting automatically.
When Q2 starts conducting, this transistor turns on.
When this transistor turns on, the current flowing through this transistor starts flowing like this.
This is how the current flows through R3, Q2 and Q2.
When this happens, the current flowing through Q1 reduces.
By reducing this current, BJT is a current controlled device.
When the IB1 here reduces, the conduction of Q1 reduces automatically.
When the conduction of Q1 reduces, the current flowing through Q1 is controlled by the current flowing through R3.
This is how the voltage is regulated.
This is very simple.
When Vin increases, the input increases.
When the input increases, the output increases.
When the output increases, Vr2 increases.
When Vr2 increases, Vr2 is the voltage flowing from here to here.
When Vr2 increases, Vr2 is Vbe2 plus Vz.
Vz is a constant value.
When Vr2 increases, Vbe2 increases.
When Vbe2 increases, Q2 starts conducting.
When Q2 starts conducting, the current flowing through Q1 reduces and Q1 starts conducting.
This is how the voltage is regulated.
This is the working of transistor series voltage regulator.
This is how it works.
When V1 increases, VO increases.
When Vr2 increases, Vbe2 increases.
When Vbe2 increases, IB2 increases.
When IB2 increases, the base current increases.
When IB2 increases, IC2 increases.
When IC2 increases, the current flowing through the base of the first transistor decreases.
This reduces the output voltage.
This is how the constant voltage is regulated.
This is the working of series voltage regulator.
Let us write the output voltage equation.
Vout is equal to Vr1 plus Vr2.
Let us write it again.
Vout is equal to Vr1 plus Vbe2 plus Vz.
Vr2 is equal to Vbe2 plus Vz.
Let us rewrite this equation.
Vout is equal to Vr1 plus Vbe2 plus Vz.
Vr1 is the voltage flowing through the resistor.
The total voltage is VO.
According to the voltage division equation, the total voltage is VO into resistance divided by total resistance.
The voltage flowing through R1 is VO into R1 divided by R1 plus R2.
Instead of Vr1, we can write VO into R1 divided by R1 plus R2.
Let us write the equation of Vout.
Vout is equal to Vz plus Vbe2 plus Vr1 divided by R1 plus R2.
The equation of Vout is Vout is equal to Vz plus Vbe2 divided by 1 minus R1 by R1 plus R2.
The equation of R1 is R1 plus R2 minus R1 divided by R1 plus R2.
This is the equation for output voltage of the series voltage regulator.
Therefore, we can say the output voltage can be varied by adjusting the values of R1 and R2.
We can design the value of R1 and R2 by adjusting the output voltage of the series voltage regulator.
We have to protect the transistors in the series voltage regulator.
There are two methods to protect the transistors.
One is short circuit protection and the other is foldback protection.
This is the circuit of short circuit protection.
This is the same diagram as before.
We are going to use these two diodes.
The reason why we are using these two diodes is that if we increase the value of Vi, the transistors will be damaged.
If a high voltage is applied to the transistors, the diodes will be forward biased.
This is the working of short circuit protection.
For short circuit protection, we are using two diodes to protect the pass transistor.
This is the working of short circuit protection.
When this drop is less than 0.7V, diode cannot conduct and current works on normal condition without interference of the diode.
We are using a transistor called Q3 as a foldback limiting circuit.
This is the working of this transistor.
So, this is the working of foldback protection.

