ps... nuovo store abbigliamento con l'immancabile logo tramezzino... acquista qualsiasi prodotto nello store per supportare la ricerca del tramezzino perfetto 😂...
Hi guys, how are you? I hope everything is fine, welcome back to the channel.
You see me with a different shirt than the last video because I shot the last video on Friday, September 29th.
I edited the video on Friday night and a bit even on Saturday morning and I published it on Saturday evening.
Today is Sunday, October 1st and I hope to publish this video on Monday, October 2nd.
All this is to tell you that we are almost in real time.
But apart from this detail, let's start right away with preparation 2.0.
First of all, I want to answer some comments, some curiosities that you wrote to me in the comments of the last video.
First curiosity, when do these suitcases fit?
One meter at hand, in the true sense of the word, because it is one meter long.
Amazon package has just arrived, we open it also live that there should be something for the bike.
Exactly, compressor, video clip on arrival and compressor case.
But we are interested in a piece of cardboard.
This is a meter and we still have a little something.
Let's change the meter.
To round off we can say 1.05 meters.
Now I take the suitcases off the Mytek and with the same super technological mechanism we are going to measure the volume of the original BMW suitcases.
Ah, second question, before disassembling them you asked me if with such a large suitcase the covers of the side suitcases open.
With this 58 liter suitcase, if I go to open the side suitcase, this happens, the cover goes off.
How do I open the cover of the side suitcase?
We have to unhook both sides, the cover lifts and we can remove it.
The cover is hooked to this steel cable that is used at the end of the race, which we can unhook.
I'll show you in detail, here it is guys.
If you want to open the cover of the suitcases in this way, making them rotate without having to unhook the cover every time,
you have to buy the 44 liter suitcase because the 44 liter suitcase is narrower than the entire axis of the covers of the suitcases themselves.
Another question, you asked me if from the hole of the mechanism that blocks the suitcase water enters, I guarantee you no.
Because there is a plastic washer in the screw that acts as a gasket and I had this same mechanism in the Raid suitcases.
So I did, Russia, Scotland, a drop of water did not enter.
Another comment, you wrote to me that this screw is a bit backwards compared to the classic key and this is very true because this system was already used in 2010.
It is also true that in mechanics simple things are the ones that give less boredom.
Apart from this, another comment always says that you have to keep in mind that to remove the suitcase you have to open it,
if you do not use the bag, slightly empty it because the hook system is inside the suitcase itself.
These BMW originals are 98.5 and practically the bulk is 1 cm per side less, so 2 cm total.
I put it on the side to show you the finish, as in a comment I was told that these BMW originals are not of excellent quality.
Here we must say one thing, that these BMW originals have a treatment called anodization, while these Maitek are powder varnished.
Anodization is an electrochemical process that creates a sort of layer of oxide on the surface.
Think about the rims of the bikes, on the Super Ténéré I have all the rims stained, but also here on the GS despite being semi-new they are stained,
because with anodization a slightly aggressive detergent or even a slightly acidic rain is enough to stain them.
The same thing happens here, it is not a matter that the materials are not premium, it is a matter of finish.
Here instead they have a powder varnish, the powder varnish is a little more resistant than the normal varnish,
but if you look at the finish, this is a little more coarse, this is a little more elegant.
As for the design, instead I said that it is a purely subjective speech, now I show you from all angles and then you decide.
Front view, front view, rear view, let's put them from the point of view of the lock, this is the lock and this is the mechanical lock.
Last very important thing, let's put them in comparison with the weight, with a scale with which my brother weighed his daughter,
sorry if it is slightly yellowed because now my granddaughter is 18 years old, but it is very precise.
Let's go with the weight, original BMW suitcase not unloaded from 44 liters, 5.96 kg,
Zella Mytec suitcase not unloaded from 48 liters, 6.59 kg.
I hope I have answered all your questions, if you have more, let me know in the comments.
In the comment instead he says, you Francesco have changed the suitcases because they have been sponsored.
What to say, if I have the opportunity with this job to request products that I first of all consider valid for some companies,
I think it is interesting to see a video comparison of the kind, at least I would like to see it, especially on the couch at home.
Then what matters, I put it first, that I am honest and sincere.
Having said that, if you buy these or buy these, nothing changes for me,
on the contrary, with the maximum intellectual honesty I tell you that I have friends who use the Frank Castle,
they talk to me very well, but I have never had them, so I can't talk about it.
Having said that, I disassemble the suitcase of the bike, let's move on to preparation 2.0 and let's go open two packages.
To disassemble the suitcase there are these four screws, as I said in the last video, those towards the front are 40mm, those towards the rear are 25mm.
Let's go to the suitcase.
This time the unboxing is a little smaller, let's see what's here.
So, in this box there is the new Mitek bag, which I will show you in detail later, and we also have the very important plate.
On the other side there is the new bag, this time with the Mitek tag.
Let's open the bag, it should be in this way.
This is the bag in detail, obviously this bag is for the GS, but this new preparation 2.0
finally concerns not only the GS Adventure owners, but the owners of all the bikes, at least of all the bikes that Mitek produces at home.
Here we have the dedicated manual with the instructions, it should be very simple to install, let's see the instructions.
Ok, let's install it, let's open the plate, this is very interesting because it has the quick release, let's open the bag at the end.
Let's go back to the bike, the instructions are very simple, here you have the legend with the screws, thickness, washers,
a feature to pay attention to is that in some points you have the double letter, so GH or CB, here it explains very well that the F series of the BMW or the R series, in our case we have to look at the R series.
Let's go to the original thicknesses, in the front letter E are the highest thicknesses, H20, H20, here they are, aluminum rods, 18mm diameter, H20, very simple to do around, they go here, they go here.
In the back you have GH, these are, H8, these are, then we have to put the F washer, so surely they will have done it to enlarge the base of support and have a larger surface, then we prepare the screws, D washer, C screws.
We remove everything, we take the pack holder, we position it, we start to tighten, we try to center them to do a more precise job, just force a little, here we are.
To tighten the screws more, there would always be the inserts from USAG, which I like very much, indestructible, but those that are missing are in South America, so this time the screws are tightened with these.
We are going to put the protective adhesive in the front part, then you understand why, it would be necessary to pass a degreaser but it is quite clean, it is a slightly rubbery adhesive that is used to protect the varnish.
Work almost finished, suitcases reassembled, plate mounted, I try to show it to you in detail even if the light is not the maximum, we arrive, side view, view from above, view from below in detail, view from above.
I'll show you this thing, maybe you understand better, in the meantime we put it back, listen to this noise because this is the push and block attachment, I made a dedicated video when I told you about the Super Ténéré suitcases.
The value is important, there are about 1500-1600 euros to be discounted, but you can reuse them for life or at least until you destroy them.
I opted for these only to bring them to the channel, I had the opportunity to take them, in my opinion many are the owners of the GS Up Venture, I wanted to show an alternative to the original BMW suitcase Tris,
but if I have to tell you my point of view with the maximum intellectual extent, maybe I would have taken the original Mitex attachment because the investment is important and the bikes change.
Obviously when you order you always ask for the same key because they will provide you with all the locks with the same key.
I also assembled the bag to show you the 2.0 setup, which I honestly love, I filled it with what I found, I can't talk about it because obviously I don't know it and I've never used it, when I've tested it I'll make a dedicated video.
What I can tell you is that aesthetically I like it a lot, the material seems well done, I like the colors, it has some very interesting details that I now show you up close,
a piece of advice that I hear from Mitex designers is that this has a capacity of 60 liters, to make one of 80 liters, but maybe they will do it, they are at the beginning.
Now a panoramic tour to show you the general context, especially if you like this solution, write it in the comments if you like this solution.
I was about to forget, I want to show you something else that is purely subjective.
If you look at the frame, the tail of the bike, it's black, the gearbox is black, if I had chosen Mitex black frames, maybe in the general context, the tail of the bike, black cardan, would have been all black, from what I see I like it a lot.
At first I thought that the black gearbox and black frames would have sounded with the gray engine guard, instead now that I look at this context, cardan and frame of the bike, overall I really like it a lot.
But I repeat, purely subjective speech.
Last panoramic tour with the light that has left, then obviously you will see it well in the videos of the trip.
The space of the seat for Sara is a lot, this time she won't have a backrest, but she will lean on the bag, let's see how it is.
The bag in detail, aluminum handle with Mitex logo engraved, but a really premium finesse.
Look at the fiber, if you lift it, it unhooks and is magnetic.
Guys, it's beautiful.
The material is not rubbery, very very important, because I tell you from experience, in rolling bags, if the external material is rubbery, over time the creases ruin the material and the bag is no longer tight.
Obviously there is also the other glue available that is anchored in the side fiber.
On the other hand, it is always symmetrical with the Mitex logo.
Anyway, I don't know this bag, I have to test it before talking about it.
Let me know what you think.
Also tonight we did it, video finished, it's 9 pm, if I don't go to dinner I risk a divorce, but that's another story.
As far as the bag is concerned, we should also talk about the weight.
Obviously, compared to a bag that weighs around 7 kg, the plate does not weigh anything like the bag.
You can safely save 5 kg, but here too we will go on when we test it.
As always, I hope the video was pleasant and interesting.
Tonight I edit the video, I hope to publish it Monday evening, so tomorrow evening.
What else to say, you asked me a question related to the GS1003, what do I think about it?
It is a bit premature to answer this question, because from experience I have understood that motorcycles must be seen for real.
Also because when they make YouTube videos, especially brands, they make space videos, but they don't show anything about the bike.
I always say, let me see the details, but they have to create dreams, so it's okay.
The only thing I don't like, always from the photos, that light there, honestly, that position, doesn't drive me crazy.
Obviously this is a purely subjective speech, you can write in the comments what you want, if you like it or not.
But at the same time I think that if that light was made by the Chinese, someone would have touched it.
While BMW made it in the GS, so you can close one eye.
But this, I repeat, there is time to talk about it.
One thing I don't understand is that there is a lot of talk about a bike more focused on adventuring, so a little more off than on.
But from my point of view, the geometry of this bike, especially the suspensions, the engine is so important that it is exposed, that it must be protected.
It is not a bike designed for off-road.
Only that at the moment there is a bit of fashion, and in my opinion their marketing policy is to spread it for a more off-road bike.
But I repeat, there would be time to talk, but to talk, I always say, you have to see, you have to test.
So I close here, as if I had not said anything about it.
Let me know in the comments what you think of this setup, the 2.0 setup, the one we will adopt.
Because at the end of next week, I hope to leave for our mini-tour to South Italy.
And nothing guys, if you like these contents, subscribe to the channel, activate the bell, if you want to support me with a coffee, for me it is a golden treat.
For the rest, many more videos will come, because in my opinion this bike seems full option, but there are things that must be put absolutely.
As several have written to me in the comments, I share that you need to install accessories to make it ready, at least for our way of traveling.
Having said that, bye guys!
There is someone who comes to give me a hand to fix things, look what a mess!