Concept of AC load lines || ECT202 ANALOG CIRCUITS || KTU || Module 2
This lecture contains AC Load line of RC coupled amplifier (CE configuration)
This topic is also in the syllabus for
1. ECT202 ANALOG CIRCUITS:https://youtube.com/playlist?list=PL2UV2EJdMQmhbgPiP-dnVeRNTF0Pcfmpk
2. EC205 Electronic Circuits: https://youtube.com/playlist?list=PL2UV2EJdMQmiePALNs84TJUONtzApG9pp
3. CS 207 Electronic Devices and Circuits: https://youtube.com/playlist?list=PL2UV2EJdMQmh9Royg7s7B78IiWpou-lE0
4.ECT 281 Electronic Circuits ( Minor): https://youtube.com/playlist?list=PL2UV2EJdMQmiduKsGRgNFuu_MqB__HVpN
#circuits #ktu #ece #electroniccircuits
Hi all, today we are discussing about AC load line.
AC load line of a transistor amplifier is what we are discussing.
We have already studied about one load line, which is DC load line.
We have already discussed about DC load line in biasing.
We have already studied about fixing Q point in the middle point of DC load line.
So today we are discussing about AC load line.
Before discussing about AC load line, let us see what is DC load line.
Before explaining DC load line, we considered a fixed bias circuit.
Then we applied KV in the output loop of the fixed bias circuit.
When we applied KV in the output loop, we got the equation like this.
Vcc is equal to Icrc plus Vce.
The total voltage applied is Vcc.
There is a drop in Rc, that drop is Icrc.
There is a drop in transistor, that drop is Vce.
We got an equation like this.
Then we applied this equation in the output loop of KV.
We applied this equation in the output carrier of the transistor.
We drew the output carrier of the transistor like this.
What are the output characteristics?
These are the output characteristics in the case of a common emitter amplifier.
The relation between Ic and Vce is called output characteristics.
We superimposed this equation, Vcc is equal to Icrc plus Vce.
How can we superimpose?
We need to get the point between x-axis and y-axis.
To get the point between x-axis and y-axis, we assume the y component to be 0.
We assume Ica to be 0.
Similarly, to get the point between y-axis and y-axis, we assume x-axis to be 0.
We assume Vce to be 0.
Then we get the point between x-axis and y-axis.
To get the point between x-axis and y-axis, we assume Ica to be 0.
We assume Icc to be 0.
When we assume Icc to be 0, the equation becomes Vcc is equal to Vce.
The corresponding value of Vce is Vcc.
Next, we need to get the point between x-axis and y-axis.
To get the point between x-axis and y-axis, we assume x-axis to be 0.
We assume Vce to be 0.
When we assume Vce to be 0, we get Vcc is equal to Icrc.
We get Ic is equal to Vcc divided by Rc.
We get two points.
We get a point here.
The point here is Vcc by Rc.
The value of Ic is Vcc by Rc.
We drew these two points using a straight line.
We called this straight line as DC load line.
If we want to work as a transistor amplifier,
we fix the Q point at the midpoint of this DC load line.
If we want to work as an amplifier.
If we want to work as a switch, we fix it at the cut-off region.
We fix it at this point.
Or we fix it at saturation.
This is what we learned about DC load line.
We can understand DC load line if we pay attention.
DC load line of a transistor amplifier is the load line when there is no AC input signals are applied.
When we explain using this circuit of DC load line,
we say that this is the load line when AC signals are not applied.
This is called DC load line.
We can write this.
We can say that DC load line of a transistor amplifier is a load line
when no AC signals are applied.
When no AC signals are applied,
we call this load line as DC load line.
Similarly, that means load line of a DC equivalent circuit
with no reactive components like inductors, capacitors.
We call this load line as DC load line.
What is the significance of AC load line?
When input signals are applied to an amplifier.
We apply input signals to an amplifier.
Input AC signals get superimposed with DC voltages
and forms a new load line called AC load line.
When input signals are applied to an amplifier,
input AC signals get superimposed with DC voltages
and forms a new load line called AC load line.
AC load line is a straight line.
It is a straight line like DC load line.
It passes through any point.
We fix a Q point in DC load line.
It passes through that Q point itself.
This is called AC load line.
AC load line is when input signals are applied to an amplifier.
Input AC signals get superimposed with DC voltages
and forms a new load line called AC load line.
AC load line is also a straight line drawn through the Q point of the transistor.
The slope of the line is equal to AC impedance.
This red line is DC load line.
This is AC load line.
They meet at Q point.
Common point is Q point.
AC load line passes through Q point.
The slope of AC load line is equal to AC impedance.
If you use a transformer as an output load,
you can learn about power amplifiers.
In that case, the slope of AC load line is equal to the impedance of the device.
Let us see how to draw AC load line.
We have considered a common emitter amplifier circuit.
We are providing an AC input to this common emitter amplifier.
VCC is a voltage divider bias.
Power supply is connected to VCC.
You know that R1 and R2 are voltage divider biasing.
RE is for the thermal stability of the amplifier.
CE is a bypass capacitor.
CB and CC are coupling capacitors.
You know all these things.
We are giving an AC input to this amplifier circuit.
How we can plot the AC load line?
What are the steps to draw the AC load line?
Let us see what are the steps to draw the AC load line.
To draw the AC load line, we have to find these values.
We have to find the IC saturation.
We can draw the AC load line only if we get these two values.
The steps for drawing the AC load lines are
1. We have to find an AC equivalent circuit.
These are the steps.
2. We have to find the saturation point.
These are the steps to draw the AC load line.
Let us start with the first step.
1. We have to find an AC equivalent circuit.
Let us see how to draw this AC equivalent circuit.
To draw the AC equivalent circuit, we need to short-circuit all the capacitors.
2. We have to replace all voltage sources by ground.
3. We can easily draw the AC equivalent circuit.
To draw the AC equivalent circuit, we need to short-circuit all the capacitors.
To draw the AC equivalent circuit, we need to replace all voltage sources by ground.
Let us redraw the AC equivalent circuit.
To draw the AC equivalent circuit, we need to short-circuit all the capacitors.
To draw the AC equivalent circuit, we need to short-circuit all the capacitors and replace all voltage sources by ground.
To draw the AC equivalent circuit, we need to replace all voltage sources by ground.

