TRANSISTOR BIASING- FIXED BIAS, SELF BIAS (COLLECTOR TO BASE BIAS) || ECT202 ANALOG CIRCUITS || KTU
This topic is also in the syllabus for
1. ECT202 ANALOG CIRCUITS:https://youtube.com/playlist?list=PL2UV2EJdMQmhbgPiP-dnVeRNTF0Pcfmpk
2. EC205 Electronic Circuits: https://youtube.com/playlist?list=PL2UV2EJdMQmiePALNs84TJUONtzApG9pp
3. CS 207 Electronic Devices and Circuits: https://youtube.com/playlist?list=PL2UV2EJdMQmh9Royg7s7B78IiWpou-lE0
4.ECT 281 Electronic Circuits ( Minor): https://youtube.com/playlist?list=PL2UV2EJdMQmiduKsGRgNFuu_MqB__HVpN
#circuits #ktu #ece #electroniccircuits
Hi all, in the last class we have discussed about biasing.
Why do we use biasing?
Biasing is used to fix the Q point.
We use biasing to fix the operating point of a transistor or any other device.
Whether we use single power supply for biasing,
or dual power supply,
or current switch,
we can do biasing for a circuit.
We can categorize biasing techniques in two ways.
Biasing using single power supply and biasing using dual power supply.
For biasing using single power supply,
we are using fixed bias, collected to base bias
voltage divider bias.
For biasing using single power supply,
we are using fixed bias, collected to base bias
and voltage divider bias.
We are using only one power supply,
that's it.
Fixed, collector to base and voltage divider
we are using only one power supply.
Another category is
what we can do by using
two power supplies,
we can do biasing.
First, we can see biasing using single power supply.
The first biasing scheme is
fixed bias.
Fixed bias is
the simplest biasing circuit.
The reason behind
fixed bias is
transistor is
driven from VCC
through resistor RB.
This transistor is
driven by
this VCC.
This VCC is
connected to the base
of the transistor
through the resistor RB.
Here, transistor is
driven from VCC
through resistor RB.
The resistor is suitably
selected to ensure proper
region of operation of the transistor.
We select the resistor RB
and we can
operate the transistor
in the region of the trick.
Here, transistor is biased
by VCC
and driven
by RB.
We can choose RB
and select the
region of operation.
Next, we have to
derive the stability factor
in the case of fixed bias.
We can derive
the stability factor
in the case of fixed bias.
I have drawn the circuit diagram
of fixed bias again.
The current coming to the base
can be taken as IB.
IB is the base current.
The current coming to the collector
can be taken as IC.
First, we can derive
the base loop equation.
Base loop equation is
the equation coming to the
input side of the transistor.
The total voltage
at the input side
is VCC.
The total voltage
at the input side
is VCC.
The total voltage
at the input side
is VCC.
The total voltage
at the input side
is VCC.
The total voltage
is VCC.
The VCC voltage
is distributed
across the Rb to
the base emitter region.
The total voltage
at the output side
is VCC.
The total voltage
So, the base emitter voltage is active because the transistor is operating in an active region.
This is how the first equation is written.
Now, we are applying KVL in the collector loop.
The collector side is this output side and this output side is the collector side.
The total voltage coming from the collector side is Vcc.
So, Vcc is equal to.
Some of that Vcc is going across RC and some of it is going across the collector emitter.
So, Vrc is going across RC and Vce is also going across RC.
So, the voltage going across RC is called Icrc and the voltage going across Vce is called Vce active.
We have written the equation in the output loop.
The equation in the output loop is Vcc is equal to Icrc plus Vce active.
That's it.
We have written the base loop equation first.
Now, we have written the equation for the collector loop.
Vcc is equal to Icrc plus Vce active.
Now, if we solve these two equations, we will get the Q point.
What can we find from these two equations?
We can find the Q point.
In the first equation, Vbe active is 0.7 which is a very small value.
If we neglect Vbe active, we can find Ibe is equal to Vcc by Rb from the first equation.
If we solve the first and second equations, we can find the Q point.
What is Q point?
We have studied this last day.
There are two points in DC load line.
Vcc by Rc and Vcc.
Vcc is equal to Vcc.
Icc is equal to Vcc by Rc.
This is the straight line drawn in the middle of the DC load line.
The middle point is the Q point.
The current in the Q point is Vcc by 2Rc.
The voltage is Vcc by 2.
These two values are the Q points.
If we solve these two equations, we will get the Q point.
If we neglect Vbe from the first equation, we can find Ibe is equal to Vcc by Rb.
Now, let us solve the collector current equation.
We have studied Ic is equal to beta Ibe.
Ic is equal to beta Ibe.
There is a leakage current factor which is beta plus 1 into Ic0.
This is the variation of the collector current caused by leakage current.
The collector current equation is Ic is equal to beta Ibe plus beta plus 1 into Ic0.
Instead of Ibe, we can substitute this value.
The equation of Ic is beta into Vcc divided by Rb plus beta plus 1 into Ic0.
We have found the value of Ic.
Now, let us find the stability factor.
The stability factor is denoted by S.
The equation of S is dou Ic divided by dou Ic0.
dou Ic divided by dou Ic0 is dou by dou Ic0 of beta Vcc by Rb plus beta plus 1 into Ic0.
This term is a constant.
Its derivative is 0.
The derivative of beta plus 1 into Ic0 with respect to Ic0 is beta plus 1.
Thus, the value of S is beta plus 1.
The stability factor of this equation is S is equal to beta plus 1.
Beta plus 1 is a large quantity.
Therefore, fixed biocircuit has poor stability and is not usually used.
The value of S should be a small value.
That is the desirable condition.
Here, the value of S is a large value.
Therefore, it has poor stability and is not usually used.
We can categorize different biasing techniques as biasing using single power supply and biasing using two power supply.
The first biasing using single power supply is fixed bias, collected base bias, voltage divider bias, and biasing using two power supply.
The second biasing using single power supply is fixed bias.
Fixed bias is the simplest biasing circuit.
This circuit is connected to the transistor base by a resistor called RB from VCC.
Since it is connected like that, the resistor is suitably selected to ensure proper region of operation for the transistor.
How much is the stability factor in this case?
We can find the stability factor in this case.
To find the stability factor, we have to find the Q point from the two KVL equations.
To find the stability factor, we have to find the stability factor from the equation beta IB plus beta plus 1 into IC node.
In the first equation, when VB is 0, the value of IB is VCC by RB.
The equation is obtained like this.
The stability factor S is equal to dou IC by dou IC node.
The derivative of this is obtained as beta plus 1.
In this way, we find the stability factor in the case of fixed bias circuit.
Next, let us look at collected base bias.
You have to understand the difference between collected and fixed bias.
In fixed bias, there is a resistor called RC.
From here, a resistor called RB goes to the transistor base.
Here, it is VCC.
At the same time, this is fixed bias.
It is connected like this.
When it comes to collected base bias, instead of taking it from here,
instead of taking it from this point,
we are taking it from the collectory of the transistor.
Instead of taking it from here,
we are taking it from the collector terminal of the transistor.
A resistor called RB is taken to the base.
That is the difference between fixed bias and collected base bias.
The output is taken from here.
We are taking the output from the collector terminal of the transistor.
This figure is a collected to base bias.
In this case, we are applying KVL on the output side.
We are applying KVL on the input side.
From these two equations,
we can find the Q point when we have a problem.
The next step is to find the equation of IC.
The equation of IC is
beta IB plus beta IB plus beta plus 1 into IC0.
Then, we have to take the derivative of this equation.
When we take the derivative of this equation,
we get the stability factor when we take dou IC by dou IC0.
This is the procedure.
First, we apply KVL on the input side.
This is the input side.
We apply KVL on the input side.
The total voltage on the input side is Vcc.
The total voltage Vcc is lost on the input side.
Some of it is lost because of RC.
Some of it is lost because of RB.
Some of it is lost because of the base emitter region.
When we do this,
you have to pay attention to one thing.
The current coming to the collector of the transistor is IC.
The current coming to the base of the transistor is IB.
The current coming to the collector is IC.
What will be the current flowing through RC?
The current coming through RC splits into two.
It splits into IC and IB.
What will be the current coming through RC?
The current coming through RC is IC plus IB.
The current flowing through RC is IC plus IB.
The current flowing through RC splits into IC and IB.
Now, let's do the KVL equation.
This is usually wrong.
Let's do the KVL equation.
The total voltage of KVL is Vcc.
The current flowing through RC is IC plus IB into RC.
The current flowing through RB is IB into RB.
The base emitter voltage is Vbe active.
This is how we wrote the first equation.
Now, let's apply the second equation on the output side of the KVL.
This is the output side of the KVL.
The total voltage is Vcc.
The Vcc voltage is flowing through RC and collector emitter.
The current flowing through RC is IC plus IB into RC.
The collector emitter voltage is Vce active.
Now, let's neglect Vbe from the first equation.
Then, we will find the value of IB.
We are doing the same thing as before.
From the first equation, we can neglect from equation 1.
Then, we can rearrange the equation to find the value of IB.
Then, we will neglect Vbe.
After neglecting Vbe, we can find the value of IB from equation 1.
IB is equal to Vcc minus IC RC divided by RC plus RB.
The next step is to find the equation of IC.
IC is equal to beta IB plus beta plus 1 into beta plus 1 into IC naught.
This is the equation that we have neglected.
Now, let's substitute the value of IB.
IB is equal to Vcc minus IC RC divided by RC plus RB into beta plus 1 into IC naught.
Here, we have to find dou IC by dou IC naught.
EC naught into beta into Vcc by RC plus RB minus beta IC RC by RC plus RB plus beta plus 1 into IC naught.
Ok, how do you solve the IC into 1?
beta rc by rc plus rb which is equal to beta vcc by rc plus rb plus beta plus 1 into Ic
naught.
Ic is equal to beta vcc by rc plus rb divided by plus beta plus 1 into Ic naught divided
by 1 plus beta rc divided by rc plus rb.
Ic is equal to beta vcc by rc plus rb divided by 1 plus beta rc divided by rc plus rb.

