This topic is useful for KTU Regulation 2019 1. EET206 Digital Electronics ( ELECTRICAL AND ELECTRONICS ENGINEERING) 2. CST203 Logic System Design ( COMPUTER SCIENCE ENGINEERING) 3. ECT203 Logic Circuit Design (ELECTRONICS AND COMMUNICATION ENGINEERING) 4. EBT205 Logic Circuit and Design (BIOMEDICAL ENGINEERING) 5. ITT203 Logic System Design (INFORMATION TECHNOLOGY) 6. ECT203 Logic Circuit Design (APPLIED ELECTRONICS ENGINEERING) KTU Regulation 2015 1. EE204 Digital Electronics and Logic Design (ELECTRICAL AND ELECTRONICS ENGINEERING) 2. CS203 Switching Theory and Logic Design (COMPUTER SCIENCE ENGINEERING) 3. EC207 Logic Circuit Design (ELECTRONICS AND COMMUNICATION ENGINEERING) 4. EC207 Logic Circuit Design (APPLIED ELECTRONICS ENGINEERING AND INSTRUMENTATION) 5. IC207 Design of Logic Circuit (BIOMEDICAL ENGINEERING) FOR FULL CLASSES : https://youtube.com/playlist?list=PL2UV2EJdMQmgLuA8dwLY7-4DsbNQTsUOg #digitalelectronics#ktu#eee#electrical#cse FOR FULL CLASSES : https://youtube.com/playlist?list=PL2UV2EJdMQmgLuA8dwLY7-4DsbNQTsUOg #digitalelectronics#ktu#eee#electrical
Hello students, today we are going to discuss about the characteristics of a logic family.
In the previous class, we have discussed about TTL, i.e. transistor-transistor logic,
TTL NAND gate and CMOS NOR gate.
I hope you all have understood that class.
So, let's go to the characteristics of a logic family.
There are some characteristics of a logic family, let it be TTL or CMOS.
The first one is Speed.
When do we determine the speed of a device?
The speed depends on the number of changes in the input.
If the delay is more, the speed will be less.
If the input is on the spot, there is no delay.
If there is a delay, the speed will be less.
The first characteristic is Speed.
If the input is on the spot, there is no delay.
If the input is on the spot, there is a delay.
The first characteristic of a logic family is Speed.
The second characteristic is Fanout.
Fanout is the number of loads that the output of the gate can drive.
The third characteristic is Fanin.
Fanin is the maximum number of inputs that can be applied to the logic gate for proper operation.
The maximum number of inputs that can be applied to a logic gate for its proper operation.
The fourth characteristic is Power Dissipation.
It is the power gained per gate.
The fifth characteristic is Propagation Delay.
The average delay time for the signal to propagate input to output.
It is the average delay time for the signal to propagate input to output.
The sixth characteristic is Noise Margin.
It is the time of noise voltage that can be present without disturbing properties operation of the circuit.
What is Noise Margin?
It is the noise voltage present in the circuit without disturbing the properties of the logic circuit.
The seventh characteristic is Figure of Merit.
It is the product of propagation delay and power dissipation.
The eighth characteristic is Logic Swing.
It is the difference between output voltages.
The ninth characteristic is Noise Immunity.
It is the maximum noise that a circuit can withstand without changing the output.
The tenth characteristic is Breadth.
It is the number of various functions available in a logic family.
The eleventh characteristic is Fan-In.
It is the number of inputs that can be fed into the logic circuit without affecting the operation of the logic circuit.
It is the power gained per gate.
It is the average delay time for the signal to propagate input to output.
The ninth characteristic is Noise Margin.
It is the minimum noise that a circuit can withstand without affecting the operation of the circuit.
It is the product of propagation delay and power dissipation.
The tenth characteristic is Logic Swing.
It is the maximum noise that a circuit can withstand without changing the output.
The eleventh characteristic is Breadth.
It is the number of various functions available in a logic family.