Mimi Handmade giới thiệu đến bạn video hướng dẫn cách móc lồng đèn thỏ đơn giản nhưng cực kỳ dễ dàng. Trong video này, bạn sẽ được học cách thực hiện các bước cơ bản để tạo ra một mẫu lồng đèn đáng yêu để trang trí cho gia đình và bạn bè.
Từng bước móc chi tiết sẽ được Mimi Handmade trình bày một cách dễ hiểu và cô đọng. Bạn sẽ được hướng dẫn từ việc chuẩn bị các nguyên liệu và công cụ cần thiết cho đến cách thực hiện từng đường chỉ móc. Bạn sẽ được thấy cách ghép nối các phần cùng nhau và tạo ra hình dáng đáng yêu của lồng đèn thỏ.
Hãy cùng đến và khám phá cách móc lồng đèn thỏ cực dễ của Mimi Handmade. Thủ thuật này không chỉ giúp bạn thể hiện tài năng sáng tạo mà còn tạo ra mối kết nối thú vị giữa bạn và những người xung quanh. Đừng quên nhấn like, chia sẻ video và đăng ký kênh để không bỏ lỡ thêm các video hướng dẫn DIY và sáng tạo khác từ Mimi Handmade. Cảm ơn bạn đã theo dõi và hy vọng video hướng dẫn này sẽ mang đến cho bạn niềm vui và cảm hứng trong cuộc sống sáng tạo của mình #MócLồngĐèn, #HướngDẫnMócLồngĐèn, #LồngĐènThỏHandmade, #MimiHandmade, #moclongden, #longdentho, #diy
Hello everyone, welcome to my channel. Today I will show you how to make a super cute and easy-to-make lantern.
I hope you will like this model. If you like it, please like this video and comment below to support me by subscribing to the channel.
Thank you very much. I wish you success in making this beautiful lantern for the upcoming Mid-Autumn Festival.
For this baby rabbit, you will use the free yarn. I use the Mikutong yarn. The length of the yarn is about 2mm and is divided into 5 strands.
Prepare for me to add the eyes. The eyes can be 4, 6 or 8 glasses.
For the baby rabbit, you will use the free yarn. I use the Mikutong yarn. The length of the yarn is about 2mm and is divided into 5 glasses.
Prepare for me to add the eyes. The length of the yarn is about 2mm and is divided into 5 glasses.
Now I will show you how to make the ear hole
I will make 2 pieces of the body
Now we will make the ear hole with 9 chain stitches
1 2 3 4 5 6 7 8 9
insert the hook into the 8th stitch, make 1 single crochet
3 single crochet in 3 stitches
2 3 4
so we have 4 single crochet
1 half double crochet in the next stitch
1 double crochet in the next 2 stitches
1 2 3 4 5 6 7 8 9
insert the hook into the 8th stitch, make 1 single crochet
3 single crochet in the next 2 stitches
1 double crochet in the next 2 stitches
so we will not have this hole
Usually, if you make a lot of stitches, it will have a hole
but after we knit together between 7 stitches and 1 stitch, you will tighten it again
to tighten this double crochet stitch
it will push the hole up, it will not have a hole
Now we will make the next double crochet stitch
1 half double crochet in the next 2 stitches
1 single crochet in the next 4 stitches
1 2 3 4
insert the hook into the first stitch
you will make 2 holes
pull it back
adjust the foam
If you want the bracelet to be longer, you will knit more than 9 stitches
for example, 10 stitches, 11 stitches, 12 stitches
you divide it
for example, 12 stitches, we will make 6 single crochet stitches
next to 6 single crochet stitches will be 1 half double crochet
for the remaining stitches, we will make 1 half double crochet
for the last stitch, we will make 7 half double crochet stitches
for the other side, we will make 1 half double crochet stitch
If you have any questions, please leave a comment below
I will answer you
Now we will hide this foam
cut 2 pieces of foam
Now we will hide this foam
insert the hook into the right side of the foam
1 half double crochet in the right side
1 single crochet in the left side
insert the hook into the stitches
we will hide the foam inside
you can buy soft or hard foam
soft or hard foam is fine
cut off the foam
Now we will make the hot glue
we will take a pen
we will draw
cut the foam
we will draw a bigger part
we will cut the foam
now we will make the button
Now we have a string like this, this is the left side, this is the right side, we will shoot glue in the middle, this part to this part, you will hold this part in, then we will shoot glue on this side, then we will hold the other part in.
It's like that, the two sides are upside down
Because here, this part is not good, the top part is not good, the bottom part is not good
But when you look at it, it will be at the bottom
The other side will be at the top
We pay attention to that so that the product can be adjusted more
And now you will put it in like this
Put glue around this place
Here you are, I have put glue on it, you just keep this glue
After we finish down here, you will adjust it
We will shoot glue up here, shoot glue all the way
Then we will pull it, it will come out straight
I have shot glue, you will pull it in
Where is the lack of glue, I will do more
Then you will do the same for the two pieces
Now we will stick the eyes
You will stick the eyes near each other between this point
Like this, we will stick right here
I have finished sticking the eyes
Now for the legs, we will stick right here
We will stick right here
Then we will stick the legs in, let it come out a little
Like this, it's like sitting
Here we will make the last double line
We will stick it like this
Then you stick it together like above
Now for the rabbit ears, you will stick it on the first nose
Then you shoot glue for me in this first place
I have finished shooting glue, you will stick it in
Keep it here for a while
Continue, we will stick it fixed
This point is here, we will shoot glue here
Here you are, then we will stick it up like this
This place still has a hole, you will shoot glue here and stick it in
So I have finished 2 pieces
You make 2 pieces so that they are the same
Just leave a big piece and a small piece
In general, at the same time, my hands are still
If you make it at a different time, sometimes the hands are loose
You have to adjust it first, then I stick this fabric in
Now we will take the pink cheese out
I will guide you
Now we will do it like this
You will brush it, spread it out
You will do the same on the other side
The pink cheese here we will do a little for it to be neat
Now this part of the light wire
We will take this out
We will do it directly on the light wire
Put this in the middle
Then wrap this pole, pull it out a little
Put it in here
This black color is turned up to make it easier for you to press
Then in the middle
So it's beautiful
Now cut it
If you want to reuse this light wire
We will wrap the pole
Wrap it around
Then we let it go
We will glue it to the pole
I will do this directly
Glue it here
Glue it in the middle
Glue one side first
The other side I will glue later
Now we will shoot glue at this point and this point
I have shot glue
We will stick it in the middle
Turn its head up
Turn the button
Over there you will also shoot glue at this point and this point
I will stick it in
You guys watch it carefully
Because we have to stick it evenly
2 sides
Now we have a baby elephant
Now there is a tail
The tail can be white, pink or pink like this
Or if you don't want to make a boom boom
I will do this part
I have already instructed this in previous clips
I will put the boom boom guide link
I made it by hand
I have already instructed you
And this round fruit
I have also instructed
If you want to stick a round fruit
We will stick a round fruit
If you want to stick a boom boom
We will make a boom boom
I made the ears pink
I will also make this pink
To make it beautiful
For girls
If you make a boy
We will make one color
After you finish
We will leave 2 clips like this
Let's connect
Now you will
Insert the needle
Pull this clip
Go in
Notice
There is a transparent ring
On this side we will also pull this clip
Let it go in like this
Now let's see
So I think it makes sense
Now we will tie this up
Then you will tie it up
Then I will cut it
Then we will cut it
After cutting, we will get a foam like this
Then
Now we will make the
The rope
You will also
Cut out for me a section
One more clip
Then we sew it in
Now we will sew this clip
Through the sewing needle
We will do it from the beginning
First you will
Tie this up
Tie it up again
Then this short clip
You will
Hide it in the hook
Hide it in the hole
Make it more secure
The rest of the clip
We will sew over here
Now
We will
Tie this up
Because I still have a section above
So I will tie this up
Just tie it up
If you want to sew
I'll take it off
Then I'll put it on top
One more clip
Then I will hide this normal part
In the hook
Now I try to turn on the light
It
It's okay
So cute
Now we will
Now I have this
And this
I'm stirring
Maybe I'll make a wooden stick
Leave this
Now
One more
I will take the glue
I will stick it in here
I will stick it here
Make it more beautiful
So magical
Now
The part
The stick
It's okay
It's too long
I'm going to cut a few
This line
In
Now I try to put this
I see it
It's okay
Maybe I'll put something
No need to add anything
These accessories
Save other
So now we will
Tie this up
This one
You will
It's okay to use glue
Now I use glue
I stick this place back
Stick out
I pull it in
Inside
To make it more beautiful
So now I just
Stick it inside
Instead of outside
Stick it inside
Now I just stick it in
Inside
Make another part here
I see it
It's stuck
So now we will
Hide the two lens
I will meet you again
This game is really fun
Then we will
Put this lens
Inside
How much is left
We will cut it
The rest of you will do the same
So I have
I have successfully guided you
The rabbit lantern model
Now we just stir
Go play in the fall
I hope you will
Love and make
The rabbit lantern model
If you like
Remember to like this video
And support me
By subscribing to the channel
Thank you very much
Thank you for spending time
Watch this video
And make this model
Now I say goodbye to you
See you in the next clips
Bye