Máy vắt sổ gia đình trung quốc - Nhật bãi mini cũ giá rẻ _ Kỹ Thuật May Hai Lúa Ngành May Mặc

Kỹ Thuật May
14 người theo dõi
2 Lượt xem video·1 thg 10, 2023
Hello, everyone.
The first thing I want to tell you is that
the Kuro rope,
this rope,
maybe at the beginning,
they measured it correctly.
It means that the tension is right.
But after a while,
this rope will be cut off.
At that time,
the rope will not stick to this glass.
It will fall down.
If you don't pay attention to it,
you keep stepping on it,
the rope will be broken.
It won't stick to the glass.
It will pull this thing away.
It will damage this rope very quickly.
So when you pull it,
and you feel it falling,
it won't stick.
It won't be as strong as it was at first.
Then you adjust the two screws on this motor.
You see, there's a slot here.
When you pull this screw out,
you can move this back and forth.
There's another one down here.
Then you open the two screws.
You don't have to open one,
but you have to open both at the same time.
Open it loose,
don't take it out.
Just open it loose.
Then you adjust this motor back and forth
to make the rope tight.
It tightens or shrinks.
But usually, it only shrinks.
Because at first,
they measured it correctly.
It took a while for it to loosen.
When the rope loosens,
it shrinks.
So, again,
open these two screws to loosen it.
Then you move it.
Then you adjust it to make the rope tight.
Don't tighten it too much.
If you tighten it too much,
the motor won't pull.
It will burn the motor.
After adjusting it,
you tighten these two screws.
Remember to tighten it just enough.
Don't tighten it too much.
If you tighten it too much,
the motor will fall off.
You won't be able to find the motor to replace it.
You can find it,
but it's very difficult.
All the things in the family machine,
from the sewing machine to the washing machine,
the motor is very fragile,
very small.
So you have to tighten it just enough.
The difference between having a full table like this
and not having a table,
but having it on a mini table,
having a full table like this
has advantages and disadvantages.
However, if you add a table like this,
you will have to pay an additional 500,000 VND.
500,000 to 600,000 VND
depending on the old or new table.
Now,
if the family sewing machine is a mini table,
when people make it,
do they have to break their legs like this?
Do they have to break their legs by hand?
But if it has a table like this,
it has a pedal.
See?
It has a pedal to break your legs.
See?
To break your legs.
See?
It's connected up here.
See?
And secondly,
it has a stopper.
The stopper is this.
See?
The stopper.
And
the next thing is
because I have a table,
a full table,
my working space
is comfortable.
It's spacious and comfortable.
Those are the three advantages
when a family sewing machine has a full table like this.
However,
I will spend more money.
And if the area of the house is too tight
so that I can't put the machine like this,
the table is about 1 meter,
everyone has to have a place about 1.2 meters
about 6-70 cm wide.
See?
So I can put a table like this.
I have just analyzed for everyone to know
when a family sewing machine has a full table like this,
it has only three advantages.
First, I can remove the stopper.
I can remove the stopper by stepping on it with my feet.
I don't have to use my hands to remove the stopper.
The rest is
the stopper,
and the table.
My working space is comfortable,
which means I have to pay more money.
That's just everyone's preference.
I always say this again and again
to remind everyone.
A sewing machine,
whether it's a good machine or a bad machine,
or a high-end machine,
or a low-end machine,
a Japanese machine,
or a Chinese machine,
basically,
I have to show it right.
When a machine comes home,
if it's the first time I use it,
or I've used it before,
each machine has a different way of showing.
So, first of all,
I have to learn how to show it right
so that I can make a nice table.
Second,
for a family sewing machine like this,
I have to put a lot of oil on it.
If I don't put a lot of oil on it,
it squeaks very loudly
and it squeaks very quickly.
It squeaks the traditional joints like this.
There.
They already made the holes.
The holes have the letter Oi and the name.
That's for me to put oil in.
I put oil in those holes.
See?
This place has a pin.
I press the pin down,
I press the oil in.
Then,
the pin that goes up and down,
I have to press the oil in.
See?
In general,
I have to put a lot of effort into using a family sewing machine.
I have to put a lot of oil in
so that the machine is smooth,
so that it squeaks,
so that I can use it.
And,
I want to remind you of a very important thing.
That is,
the family sewing machine,
the blade,
the blade is very fast,
very fast.
So,
if you can,
if you cut it accurately,
then don't abuse it.
For example, when you sew,
you let the blade shine,
it shines.
You limit it.
You cut it straight,
then you sew.
So,
if you cut it just to the blade,
then the blade only cuts the fibers,
the fibers,
the fibers.
The rest,
don't abuse it,
let the blade shine on the fabric,
like a sewing machine.
So,
first,
it's fast,
