A complete guide on how to do INTERIOR LIGHTING with CORONA RENDERER for 3DS MAX 2020 | LIGHTMIXER

Decor Design 3D
20 followers
Hey guys, it's Hadi again from HME studio and in this video
I'll show you how to illuminate this gorgeous interior scene with Corona renderer
You'll learn how to do that with the Sun and Sky
HDRI images and how to add some extra artificial lights to get a uniform looking light all over the scene and
Also, I'll teach you how to use multiple environment lights with the light mixer in order to extract many different moods out of only one render
But before we start, please don't forget to subscribe and hit the notification bell. Also, that's being said
Let's move over to 3ds max and start the project
Okay for indoor lighting we have two different source of lights
The first one is natural illumination by capturing daylight using windows or skylights
which basically is the main source of light during daytime and the second one is by using
Artificial light sources such as lamps and light fixtures. There are so many ways that you can do indoor lighting
But in this video, I'm gonna show you how I do it almost every time
For me always the first step is to use an override material
So I could get a clear idea about how lights are reacting in the scene
It would be so difficult to tell if I have many different complex materials with different diffuse color
Reflection refraction and other stuff. So in order to do that
I need to enable override material under the scene tab and apply a simple Corona material to that
Also, I need to exclude light glass and portal materials because obviously we want the environment light to get through the window
Okay, the next step is to add the portals
We need to cap the openings with the simple plane geometry. Just make sure to cover the whole space
So don't forget to use the snap tool for that
And just so you know, it doesn't matter if the normal of this plane is facing inside or outside. It'll work either way
Now I just need to apply a portal material to that
Portals are telling Corona how to sample light more efficiently, which helps to get rid of image noise much faster
So it's really necessary to use them
Okay, as the first method we're going to use the Sun and sky
First of all, let's go to the top view and start by adding the Sun into the scene
Now move it up to here. So we could get a nice afternoon sunlight as for the environment
We need to add the Corona sky
First make sure the Sun is selected
Then go to the modify panel and add Corona sky to the environment slot by clicking over here
Okay. Now, let's start the interactive rendering to see what we got so far as you can see
The intensity is way too high. But the first thing you always want to do is to increase the highlight compress
Increasing this number reduces the burnout effect on the bright areas, but also reduces the contrast of the whole image
which actually is not a big deal because we can always add some extra contrast by using this option over here or
In the post-production with Photoshop or any other software that you're used to
Okay, I still feel the intensity is too high. Therefore. I'm going to reduce the intensity on both Corona sky and Corona Sun
I'm going to use the same number for both of them to modify the Corona sky intensity first
I need to drag it into the material editor and choose the instance
Now, let's double click on it in order to get access to its parameters and reduce the intensity by half
Now, let's use the same number for Corona Sun as well
Okay, it already looks so much better
You should know that by moving the Corona Sun along the z-axis
You can match the way that light looks at different times of the day
So for example, if I want to have a sunset I could simply move the Corona Sun all the way down close to the ground
All right, these buildings are blocking the sunlight so let's move the Sun slightly to the side
Okay, this is fine. Now that we're here
There's something else I should tell you as all of you know
The Sun appears to be bigger when it's closer to the horizon line to simulate that effect. We have this option over here
By increasing this number the light source, which in this case is the Sun will get bigger. Therefore we'll get softer shadows
I can't give you an exact number for that because it's kind of like your artistic touch
So feel free to test some different numbers and see which one is more suitable for your project
You can also use this option in the overcast weather when the Sun shining through the clouds and shadows are soft
For this scene. I don't want to have any sunlight in the room instead. I want that on these buildings across the street
So I'm going to move it over here
Okay, that was all about the Corona Sun and Sky now, let's start with the HDRI
just make sure to make a copy of the Corona Sky into the material editor because we're going to use it again as
One of our multiple environment lights when we start with the light mixer
I've already done that when I was trying to reduce the intensity
Now we can remove it from the environment slot by right-clicking over here and selecting clear
All right
Now let's add the HDR image into the material editor first
You need to create a Corona bitmap and load your HDR image for this scene. I'm going to use two HDRI images
Let's start with the cloudy weather and later on. I'll create a dust mood as well
Now, let's connect this bitmap to a Corona color correct node
And then we can instance this node into the environment slot
The reason that we're using this color correct node is for us to be able to change the intensity
Contrast and saturation of this HDR image if that's necessary
Now, let's start the interactive rendering to see the result
I think it's good as it is
But you always need to rotate the HDR image because you might find some more interesting moves
I always rotate the HDRI for a full circle by 90 degree steps and save out the result in the history panel
So I could compare them to each other and decide which one is more interesting
In this case, I don't want to make any rotation, but I'll show you how to do that. Anyway
First I start off with 0 degree. I let it render for a decent amount of passes so I could see
How is the balance between the lights and shadows?
Let's save this and try again with 90 degrees
I'm going to pause the video and repeat the process with 180 and
270 degrees as well
Alright, now we can compare these images together with the left
Click you can set any of these images as a and with the right click you can set it as B
Let's start with the first two images
I'm going to set this one as a and the second one is B
Now with this slider over here, I can compare the two images
Let's say I like the second one better
so I'm going to set this one as a and the next one as B and
So on as I said before I'm not going to change the rotation for this image
So let's change this number back to 0 and we're done with this one
I'm gonna use another one with dusk mode
But this time I will speed up the video since everything will be the same for that image as well
Okay, now that we're done with the environment lighting it's time to add some artificial lights such as halogens and this floor lamp over here
Let's start with the halogen lamps
First off I need to create a disc light right below one of the halogen lamps that I have
In order to do that, I'm going to the top view first create the light with three centimeters of width
Then I'll move it up in the front view
Now, let's make some copies of this light for all of the halogen lamps. Just make sure to make them instance
All right, now let's run the interactive rendering and modify the lights as it's rendering
I'm gonna turn off the environment light for now because I want to see the effect of the halogen lamps alone
Okay
first of all
I have to disable all of these options because I don't want to see the light source in my renders and
Also, we don't want to get any reflections from them in the window
And as you can see the intensity of the lights is way too low
I'm going to increase the intensity until I get the desired effect
1200 seems to be a good number, but they're not still bright enough and that's because I haven't used the directionality option yet
And they're casting the light like area lights. I need to increase the directionality to get this spotlight effect
Okay, let me save this render so you could see the differences after I add some directionality to these lights
The light emission will get more concentrated as I'm increasing this number for these spotlights somewhere around
0.4 is a good number
All right
Now let's compare the two images as you can see the image on the right is brighter
although I'm using the same intensity for both of these renders as
for the color
I always keep them white because I'm going to use the light mixer and it's easier for me to adjust the colors over there
There is another way to make this spotlight effect and that's by applying an IES profile to your lights
To do that. You just need to click here and choose one of the IES profiles that you have
There's a small pack which comes with the corona renderer and I'm going to use one of these but first
Let's try some of them for you to see their differences. Okay for this scene. I'm going with the white soft, which I think is nice
Okay, we're done with the halogen lamps I'm going to illuminate the pendant lamp as well for that also I need a disc light
Like halogen lamps, but this time I'm going to use the directionality instead of IES
Now, let's create the light source in the top view and I'm going to move it up to here
This time I'll turn off the halogen lamps so I could see the effect of the pendant lamp
I'm gonna increase the directionality to 0.4 and the intensity to somewhere around 250
Okay, it looks nice. I'm going to do the same thing for the floor lamp as well
Let's turn off the pendant lamp this time and create the light
I think it looks nice as it is, but if you want you can use an IES profile for that
I'm going to leave it this way now for the last step. Let's add some lights below the cabinets for that
I'm going to use a narrow rectangle light
Now, let's isolate the top cabinets and create the light in a top view. I
Need two more copies of this light for the sides and I'm going to choose instance again
Now, let's scale it down a bit and make another copy. I'd forgotten to move them up
so let's do that first and I'm going to use 0.2 for directionality and
I'll use 200 for the intensity
Now let's turn on all the lights together and see what we got
It seems I need to add some contrast to this image and the intensity looks a bit high
So let's reduce this number a bit now
I just need to add all the lights into the light mixer and adjust the colors
In order to do that first, I need to add the light mix element to the render elements
Then I'm going to add one light select element for each group of lights
For example, I'm going to
Divide the halogen lights into two groups one group for the living room and another one for the kitchen
so let's select all the halogen lights in the living room and
Add them to this element. I just have to click on this button over here and
Everything is done and I'm going to do the same thing for the kitchen pendant lamp floor lamp and all the other lights as well
Okay, you remember that we made three different lights as the environment light and
In order to use all three of them
We need to go to the environment rollout under the scene tab and choose the multiple map now from here
We can add as many environment slots as we want which in this case we have three of them
So let's add three slots and use each of our environment lights in one of these slots
Three light select elements and use each of them for one of these environment light
the first one was the corona sky, which is this one the second one was the cloudy weather and
The last one was the dusk mode
Alright, everything is ready. Now. I just need to disable the override material on hide everything and start the rendering
I'm going to render two or three shots and we'll modify them together when they're finished
Okay, guys rendering has finished and these are the final results with default settings
Unfortunately 3ds max did crash during the rendering and I had to recreate the light mix again
And I'd forgotten to rename some of these elements. Therefore names are different in here
Just so you know, this one is the corona sky. This one is the cloudy one and this one is the dusk
So as the first step I'm going to turn off all the lights by clicking on the toggle all button over here and turn them
on one by one
First of all, let's start with the environment
Which is the corona sky as you can see the exposure is way too high
So I'm going to increase the highlight compress up to three
Okay, it looks so much better and we got rid of the burnout effect, but this image looks washed out now
So let's add some contrast by increasing this number up to three as well
There's also a bluish tint which is fixable by increasing the white balance up to 7500
This option sets the white balance of the image using the Kelvin temperature
The image will get a warmer look as you're increasing this number and it gets cooler as you're decreasing it
Now, let's increase the filmic shadows for a bit also
Something like 0.4. This option gives a bit of saturation and richness to the shadows
Okay, I'm going to turn on the halogen lamps now
Let's decrease the intensity because it's a little bit strong
Okay, it looks nice. You can also change the color in your scene if that's necessary
But for this scene, I'm gonna stick with the white color.
I guess we can add some more contrast, but this time let's use the curves adjustment
I'm gonna add some contrast to the shadows
Which is this part of the curve and since I don't need any contrast in the highlights
I'm gonna add another point to this side of the curve and slightly move it up
All right, because of that extra contrast some areas of the image looks burned out again
So let's increase the highlight compress a little bit more
Okay, it looks much better
But I'm going to add a LUT to this image also
LUT which stands for lookup table is a file that transform one range of colors in an image
to another range of colors simply by manipulating the hue
Situation and the brightness of the image these LUTs that you can see here are coming with the Corona renderer and
I'm gonna try some of them for you to see their effect
You can also change the opacity if you think the effect is stronger than what you want
I'm going to use this one, which I think is suitable for this image
Okay, since I'm finished with this image, I could save these adjustments as presets so I could use them on my other renders
You can save the post tab adjustments from here
Okay, let's give it a name and save the preset and you can do that for the light mix adjustments from here
First of all, I'm going to reset all the adjustments that we made to their default values. You don't have to do that
I'm only doing this because of the purpose of this tutorial
All right. Now, let's start everything from the scratch
Once again, we're going to start with the environment light
Let's increase the intensity and obviously we need to increase the highlight compress as well
I guess it could use some more blue color. So let's adjust its color by these sliders over here
It definitely looks better this way, but let's increase the intensity a bit more
Now we're going to start with smaller light sources first and make our way through to the big ones
I'm gonna start with this floor lamp
Okay, the intensity is good enough. I'm just going to make it a bit warmer
something like this
Now let's turn on the pendant lamp. I'm going to make it a bit warmer and I'll increase the intensity to something like 3
Now to get rid of this burned out effect. I'm going to increase the highlight compress to somewhere around 6
Okay. Now, let's do the same steps for the other lights as well
Decrease the overall exposure because it looks brighter than what I want it to be
Okay, it looks better now, let's add some contrast as we did before a combination of contrast and curves adjustment
Now, let's try some of these LUTs to see which one is working better with this mode
All right, I guess this one is fine, but with less opacity
Because of that LUT we have more exposure. So let's decrease it a little bit more and maybe we could increase the environment exposure
Actually, it was better before so let's keep it that way
Just don't forget to turn on the rest element
All the unassigned lights are going to be in this element and everything with Corona light material
But without emitting enabled like this floor lamp over here will be here as well
Okay, we're done with this mode also. So let's save the adjustments as presets and use them on another render
Now, let's say I want to use those presets on this render
All I have to do is to load the files
Light mix and
post
Of course, you need to modify some parameters based on each image, but it's so much faster and easier this way, right?
Now, let's try them on this render. It looks pretty good
I just want to take a moment and mention if you're still watching this tutorial, that means you found it helpful
So make sure to give it a thumbs up and please don't forget to subscribe to the channel also
Okay, now I'm going to do some post-production on these images with Photoshop
But I'm not going to include that part in this video because it's gonna take much longer and you might get bored
But let me know in the comments if you want me to make another tutorial about my post-production workflow as well
Okay, guys. Thank you for joining me today
And if you have any questions about this tutorial, feel free to leave them in the comment section below
See you next time
