Water is an expensive and valuable resource. A leaky toilet can become a very expensive problem if not corrected. These issues are easier to repair than you might think. I have several videos showing how to fix various issues with toilets that I will link below.
Welcome back guys it's the Tightwad. Today I'm in a beach house. Thank you so
much for supporting the channel to allow us to go on these much-needed vacations
with my family. But the first day we noticed that the toilet kept running
every time we flushed it. Instead of calling the maintenance company I
thought I would take the opportunity to make a video showing how to fix it. Now
this is not a man's filled toilet like the other video that I posted that I'll
link right up here on the screen. But this toilet has a what's called a
flapper valve and Fluidmaster sells this Prefermax longest lasting flapper and
it's actually adjustable. You can see the dials right here on the top. So the first
step to fixing a toilet that's doing this is to pull off the top and see what
you're working with underneath. So this is actually a more common issue with
these flapper type valves. You can see that the chain has been sucked down in
there. So on this type of toilet the temporary fix is to jiggle the chain by
pushing on this lever and you never have to remove the top. But actually this
chain needs to be shortened. So to shorten the chain I'm going to cut off
the water that's filling the valve. Your toilet should have a water shutoff valve
somewhere near the bottom left hand corner of the toilet and you just twist
it tight meaning righty tighty. So once it's completely cut off we could flush
the toilet again if we needed to but I'm just going to pull up on this lever and
we are going to tighten this chain. You can see there's a little clip here that
the chain connects to and here's a better look at how this clip is made. So
the chain would slide up and back across this little hook that goes in the middle
and we're just gonna raise it a couple of links. With a couple of the links
removed from the length of the chain you can see that it can no longer get hung
around the outside of the flapper so it will easily raise and lower and now you
need to cut your water back on and see if you fixed your issue. If this were my
personal tank I would also cut this chain right here so it doesn't get
tangled up. You can see how I've now looped this chain to hold it up out of
the way since I didn't have a way to cut it and now it's gonna stay out of the
way while the toilet is flushing. This was the issue with this toilet but I
want to share some other tips with you just in case your issue was different. If
you have this type toilet and the ball is down at the bottom the flappers all
the way down the chains not in the way and you still have a leak you can
replace this whole flapper valve for about $5 and you would just remove it
from here and here just pulls right off and then the new one just pops right in
and then all you have to do is connect the chain back to your toilet flush
handle here and you're good to go and you're back in business. Just click the
link showing here and a video showing how to do this process will open on your
device. And the third one could be it's still running because this fill valve
the float is getting stuck and it doesn't realize when it's supposed to
cut off. This piece moves up and down or you could have the long skinny arm float
with the big ball on the end and it could be getting stuck somewhere and
just not letting the toilet know that it's done filling. This is has a hole on
the top right here to prevent the toilet from overflowing and making a mess
everywhere so this will continue to allow water to pump into the tank and
the water level will rise to the top of this and it'll just continue spilling
into here and wasting water. So anytime you hear your toilet start running make
sure you open it up and diagnose the fix for it. It'd be awesome if you guys would
take a chance to subscribe to my channel and click on that notifications bell so
that you'll know next time I post helpful DIY tips that every homeowner
needs to know how to do. I've turned the water back on because I want to show you
the way the entire toilet functions. So the flapper valve is down in the hole
like it's supposed to be. The water is shooting into this tube which is filling
the tank from the bottom instead of the spraying all over the place. So the water
from the fill valve goes into the tube and fills the tank and I want you to see
what happens once the water hits the top of the tank. You can see our water level
is starting to approach the dark line where we know the water fills to but
you're going to notice the float on this shaft right here start to get
higher and higher starting in just a few seconds. So we'll watch that. Alright you see it
loosen up and it's starting to rise on the shaft and it's going to rise and
then all of a sudden this piece right here is going to lift up and that is
what's going to cut the water off. So you saw this piece raise up at the very last
second there. The water cut off. There's no more water spraying out of that tube
into this other tube down here and this toilet is fixed and ready to roll.
I hope you found this video helpful. If you did give it a thumbs up and subscribe to my
channel. Post any questions you might have in the comment section below and
I'll make sure I get right back to you and I hope you guys have a great day.