In this episode, we explore buildings that harness the power of nature, including wind turbines, power stations that run by water, as well as solar panels. -- An investigation into the greatest man-made structures of all time, exploring how new materials and construction techniques have allowed engineers, builders, and architects to work to the limits of their ability. The series focuses on the buildings that re-wrote the rulebook and the architects, engineers, and builders who made the impossible possible. -- Subscribe to Spark for more amazing science, tech & engineering videos: https://goo.gl/LIrlur 🚀
In this program, we look at three buildings whose function is to harness the energy found
in nature.
We visit the giant solar furnace at Odelo in France, and travel to Dinorwig in Wales
to see the mountainous hydroelectric pump storage power scheme.
But we start at one of the world's most successful wind farms.
Using the energy in the wind is nothing new, of course, and for centuries, small windmills
like this have used the power of the wind to turn grinding stones or pump water for
agricultural purposes.
But modern societies consume enormous amounts of energy, and there are strong arguments
for reducing our reliance on fossil fuels wherever possible.
Here in Sweden, on the island of Gotland in the Baltic Sea, energy is being extracted
from the wind on a commercial scale.
This is Nasudden 2, the most successful wind turbine in the world, holding the record for
the greatest amount of energy produced in one year, 7.7 gigawatt hours.
That's enough electricity to supply a community of around 1,500 homes with all the power they
need.
It's part of a large complex of turbines on Gotland, which are being used to develop even
more efficient ways of generating power for the future.
Wind turbines have to be in exposed positions, so they need to be simple to construct and
maintain.
They also need to be attractive so that they complement the natural landscape as far as
possible.
Nasudden 2's rotor blades are wider than the wingspan of a jumbo jet, and the concrete
pylon is 77 metres high.
This gantry is used for inspecting the rotor blades, but it gives us a good chance to see
the pylon.
The pylon was built in 1982 for an earlier version of the wind turbine, a lower power
model.
It's built out of reinforced concrete, constructed by slip-forming.
That means the concrete was poured continuously while the shuttering was moved up, just like
we are.
The faint vertical marks you can see on the outside are left by the shuttering as the
mould was pulled up the tower.
Inside the wall, the concrete is heavily reinforced with steel bars that run up and down and all
the way round, and that gives it the strength it needs to support the turbine on the top.
The new turbine was installed in 1993.
Like the old one, it was lifted up the pylon with its blades in position by winching it
up these tracks here on the side.
It weighed 200 tonnes and took eight hours.
They had to wait for perfect weather conditions to do it, which as you can imagine in this
part of the world, took some time.
In fact it was three weeks before there was a period with no wind and they lifted it successfully
to the top.
They only just got there in time, after it was fixed down, the wind picked up just one
hour later.
We've locked the rotor so we can get out here and get a closer look at the huge 40 metre
blades, one up above me and one down there below.
They're made of a special lightweight carbon fibre composite inside a protective shell,
so they have the strength and stiffness that they need.
Even so, they still weigh 10 tonnes each and when they're spinning, they're subjected to
forces known as centripetal forces, trying to tear them off their mountings, up to 100
tonnes in each direction.
So they're secured firmly to the rotor using this ring of bolts around the perimeter here.
I'm in the machine house just behind the rotor.
This is the gearbox here and the generators just down below.
It works just like the opposite of a giant electric motor.
Instead of the motor driving the blades, the blades drive the motor and that generates
electricity.
But the blades don't turn all the time.
At low wind speeds, it isn't efficient to let them turn because all this equipment takes
power to run it, 36 kilowatts in all.
So when the wind is less than 5 metres a second, that's 18 kilometres an hour, the rotor's
shut down.
The wind blowing on the rotor and the pylon creates a drag on the exposed structure, trying
to blow it right over.
Its weight is 1,500 tonnes and the foundation weighs another 1,900 tonnes.
All this weight helps to stop it toppling over in the wind.
But the shape of the structure is also critical to the design.
The shape of the pylon helps it to resist the forces acting on it from its weight and
from the wind.
If it was a simple cylinder, like I've made from this road map, it would be easier for
it to topple over or to slide at the base, what's called shearing.
But its flared shape gives it several advantages.
It's much stiffer in bending and more difficult to topple, but also because there's more area
at the base, it's easier for it to resist that shear force.
The pylon is cast directly onto the concrete foundation here and it's this joint that's
critical to the stability of the whole structure.
Steel bars which are embedded in the foundation rise up the walls and they overlap with the
steel bars which run up the sides of the pylon.
That's how the structure resists the shear force from the wind, trying to tear the pylon
and the turbine away from the base down here.
It's a great sight, even in the mist.
Nasutin 2 only runs at two speeds, 14 and 21 revolutions per minute, which are the optimum
for the generator.
It's running at 14 rpm now and it may look slow, but the speed at the tip of the blade
is 211 kilometres per hour and the acceleration is eight and a half gravities.
It's nearly five times your scary fairground ride.
It's a fine balance between the cost of the whole structure and the amount of electricity
that it will generate.
The higher you are, the higher the wind speed and the more power you can harness.
But the building cost increases very quickly.
This is the optimum design for the most powerful wind turbine in the world.
Nasutin 2 is a prototype, pushing the limits of what's possible with wind power.
We've seen that the wind turbine is a simple structure, easy to build and operate.
While wind farms like this currently only produce a small proportion of the national
need for energy, it's clear that in future they could make a much greater contribution.
Electricity is a modern convenience we all take for granted.
Whenever we flick a switch, we never doubt that our needs will be met in an instant.
The problem is that at certain times, like at the end of a TV programme or during the
adverts, millions of kettles and lights are switched on all at once.
It's a daily problem that requires an instant response.
The simplest solution is to harness another of nature's elements, the immediate power
of falling water.
The challenge would be to design a system that could work on an unprecedented scale.
This is Dinorwig in Snowdonia, North Wales.
Hidden under this mountain, below the level of this lake, is an instant response power
station powerful enough to keep the whole of England and Wales from blackouts every
day.
Its construction required over 5 million tonnes of rock to be excavated, and was the largest
civil engineering contract in Britain's history, taking six years to build.
It's the biggest hydroelectric pumped storage facility in Europe.
Yet in spite of its size, it's so well hidden that visitors barely notice it at all.
The locals call it Electric Mountain.
This is how it works.
This is the mountain, and there's a reservoir at the top called Machlyn Maw.
There's a tunnel that runs from the reservoir into the heart of the mountain, and then down
to the power station at the bottom, and another tunnel that runs out to this lake here.
There's a gate at the top to control the flow, and a surge tank to control the pressure.
During the day, the water runs down the tunnel and falls down to the power station at the
bottom, where it turns the turbines, and it's then expelled to the lake at the bottom.
At night, when electricity is cheaper, the water is pumped back up through the tunnels
and into the top reservoir, which is filled up again.
This overnight pumping is essential because the huge volume of water needed every day
is too great to be replenished by rainfall or rivers.
This is the reservoir at the top, and it holds seven million tonnes of water.
That's six hours' supply.
The original lake up here was too small, so this dam was built to give the system greater
capacity.
Its elegant design blends smoothly into the landscape.
I'm deep inside the mountain, just below the reservoir at the top, and these two huge gates
on either side mark the entrance to the tunnel, taking the water down the mountain to the
power station.
You can get an idea of the size of the tunnel from the size of the gates.
They're absolutely enormous.
This is the surge tank above the water intake tunnels.
The reason for the surge tank is to absorb the water shock waves, a bit like the juddering
in your pipes at home when you open or close a tap too quickly.
It's a straight drop of 500 metres from there to the bottom.
That's deeper than much of the North Sea.
As the water approaches the power station, the main tunnel splits into six smaller tunnels,
each heading for its own turbine generator.
The tunnels narrow to increase the speed of the water.
There are more than 16 kilometres of these tunnels, all beautifully lined in concrete
to allow the smooth transport of the water.
This is essential, as any rough motion of such a large quantity of water could damage
the tunnels.
I'm now driving into the heart of Electric Mountain, down towards the station complex,
where the falling water finally generates the electrical power.
This access tunnel is about the same size as the main water tunnel.
Just imagine that, running full of water at 18 kilometres an hour.
These are the six inlet valves, connecting the six water tunnels to the six turbines.
The instant these valves are opened, water rushes through, and in ten seconds it's driving
the turbines.
It's like having 1,800 megawatts of power on tap.
This is the machine hall, above the generators, and it's absolutely enormous.
We're in a rock cavern, two million cubic metres in size.
That's big enough to house St Paul's Cathedral in London.
Rock is reinforced with rock bolts, like this big one behind me, which are like nails drilled
into the rock and then tightened up to hold it all firmly in place.
The water finally comes out here, in Llyn Peris, the reservoir at the bottom of the
mountain.
From here, tonight, it will be pumped back up through the turbines and the tunnels to
the reservoir at the top.
And tomorrow, it will all be back down here again, all seven million tonnes of it.
To be able to generate enough power to run a city at a moment's notice every day is a
daunting challenge.
It was a bold decision to build a massive complex inside a mountain.
But Dinorwig has proved an outstanding success, technically and environmentally.
You'd hardly know it was there at all.
The instant power which Dinorwig generates serves a nation, meeting a demand for millions
for instant electricity.
But the fundamental source of nature's power isn't wind or water, but the sun.
What if we were able to tap the sun's radiation directly?
This is the huge solar furnace at Odelo in southwest France.
Its purpose is not to generate electricity at all, but to trap sunlight and focus it
onto a single spot, generating incredible heat over a very small area.
It's the biggest solar furnace in the world.
The energy from the sun reaches the earth here with a power of about 800 watts per square
meter, say eight light bulbs.
Enough to burn you on the beach, but not enough for the scientists to work with.
The challenge was to build a furnace that could focus over one megawatt of power onto
a target little more than the size of a soup plate.
Such a furnace would need to collect all the heat from the sun over a large area, over
2,000 square meters, that's eight tennis courts.
By using an array of mirrors, this large area of sunlight can be concentrated onto a relatively
tiny focal point.
The principle of the Odelo furnace is really very simple.
This is the hillside.
At the bottom of the hill is a huge parabolic reflector facing the hillside.
It's 50 meters high.
To channel the sun's rays, mirrors on the ground track the sun's movement across the
sky and feed the rays into the parabola, which in turn reflects them to its focus where the
furnace is located.
Each mirror is targeted at a different section of the parabola, but all the energy ends up
at the furnace, like this, where the temperature can reach 3,800 degrees centigrade.
That's enough to melt steel armor plating.
This is Le Champ des Heliostats, the field of heliostats.
A heliostat is a wall of mirrors which can be moved using motors to follow the sun, reflecting
the sun's rays directly into the parabola.
There are 63 heliostats on terraces up the hill, each one with 180 panes of glass.
The glass on these mirrors is as flat as possible to reflect the sun's rays without distortion
towards the parabola.
Each heliostat is aimed at a different part of the parabola, and together they cover the
whole surface.
The area of all the heliostats is slightly greater than the area of the parabola to allow
for some overlapping of the images.
Each one is controlled by a computer and can be aligned within seconds with the precision
of one sixtieth of a degree.
That means that a sunbeam hits the same spot on the giant parabola with an accuracy up
to three centimeters.
The scale of the building can really be appreciated as you begin to climb the nine floors behind
the parabola.
Even here, it's still 18 meters out to the focal point.
There are 9,000 individual mirrors on the parabolic wall.
Each one is slightly curved to improve the concentration of energy at the solar furnace.
The more perfect the parabola, the more focused and therefore the more intense will be the
sun's rays at the target.
Behind this facade we can see how they're all mounted.
Of course, the mirrors on this wall don't need to move, but they do need to be firmly
secured against the wind and the elements, and that's what these grey mounts are for.
The glass on these mirrors was specially heat-treated so that it could be bent without snapping.
This bolt in the middle pulls the mirror back so that it's curved.
Each mirror was tuned by hand to its perfect position.
It took nearly three years to complete.
The mounts holding the individual panes are in turn supported by this steel space frame,
which is fixed to the nine-storey building behind.
The building was constructed from reinforced concrete to minimise thermal contractions
and expansions between winter and summer.
Such contractions could distort the shape of the parabola.
We're 1,500 meters up in the mountains here, and seasonal changes are much more extreme
than at sea level.
This is the sharp end of the laboratory, the furnace, where the sun's rays converge
on this hole here.
It's like being at the tip of a welding torch.
Behind the hole, there's an experiment in this capsule waiting to be tested.
It's a disk of new material, like this, which will be used in the heat shield of a space
probe going to the sun in a few years' time.
Conditions in this capsule are positively out of this world.
They simulate the exotic environment close to the sun.
Extreme temperatures, 2,500 degrees centigrade.
I love research laboratories, it's great.
Odelo Solar Furnace is a world-class research laboratory where engineering and science come
together in pursuit of new, high-performance materials.
It's also an extraordinary structure, a building in which function entirely dictates form.
Harnessing nature's power on such a scale is one of the greatest challenges for an engineer.
To capture the power of the wind in Sweden, the mighty force of water in Wales, or the
heat of the sun here in France, required vision and ingenuity.
In this extraordinary field of engineering, where special applications require special
structures, we are only limited by our imagination.
In our next programme, we go underground on a journey beneath the seabed in Britain's
deepest mine.
Then we uncover an Olympic stadium hidden inside a Norwegian mountain, before returning
to England to witness the final construction stages at London's latest and deepest underground
railway station.