Ruike P831 / Новый РЕЗАЧОК на Шайбах❗️
Ruike P831-SF ► https://bit.ly/3t8fcCi
Firebird FH922PT-CF ► https://bit.ly/48qxb7q
POVNA TORBA ► https://www.instagram.com/povnatorba
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Инфа о ВЫСТАВКЕ ► https://fishexpo.com.ua
ТЕЛЕГРАМ канал ► https://t.me/bs_knives
ТЕЛЕГРАМ группа ► https://t.me/bs_knives2
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
My E-mail ► [email protected]
#нож #обзор #knife
Hello friends! Today we have a review of a novelty from the RYK company, plus another knife, which we will return to a little later.
Today we will consider them in detail, as well as make a draw, that is, we will play among the subscribers. Let's start!
So, let's take a look at these beauties. By the way, these knives for the draw and for the review were chosen by the participants of our telegram community by voting, which is important.
So, now we will consider them, and at the end of the video I will announce the conditions of the draw.
Let's start with a knife from the RYK company, because it's like a novelty, and at least we didn't have it on our channels. Model P831SF.
Subscribe to our telegram channels, groups, there are constant flows of contests and draws, this is not the first and not the last, so do not miss it.
Stay in touch, we will constantly play something.
So, this is how the knife goes on sale, with such a small label, which we will cut off.
So, the knife is most likely made of titanium, at first glance it seems so, now we will check it with a magnet.
No, a steel handle, but visually very similar to titanium.
Let's take a closer look at it. Steel handle, there is processing, such a matte one.
The axis screw is flush with the plane of the handle, there is a washer made of colored metal.
The screws are under the torx, there is a large darkening hole.
And from the end we observe an open design, without a backspacer, two planks, plus an axis one.
On the reverse side, we have a frame lock, there is a blade blocker, which blocks the blade in an open state.
And here is such a clip, which, by the way, has not been polished.
Let's see the fit. The fit is not deep, but it will be quite convenient to remove the knife from the pocket.
Plus, I want to note the excellent tenacity of the clip, that is, it is well fixed in the pocket and the knife will not be lost, I think.
Good fixation, although the clip itself is small in size.
Next, we look at the centering of the blade. The blade is clearly in the center, opens with pins.
The pins have blue processing. And let's try, test the mechanics.
The knife, by the way, seems to be on the washers, now we will check it, but nevertheless, look how willingly the blade flies out.
Now, probably, we will not pull it right away, we will take the tools and see what we have inside, because it is very interesting.
So, let's see what the disassembly showed us. Yes, the knife is really on the washers, and the washers are not simple.
Firstly, they are not brass, but copper. Secondly, they have a perforation, which is a great respect.
The steel plates have milling to facilitate the design. This is what the blocker looks like from the inside.
Ceramic detent ball, which is also very important. And this is what the blade looks like.
Thick grease, there are no milling, it is quite meaty. This is how the heel looks, it is not burned.
That is, everything is fine with the blade here. The disassembly showed that the knife is made quite competently.
Now we collect it and continue our work.
We collected the knife, the blade remained clearly in the center.
Cool mechanics, the knife shoots without backlash. No washers, no bearings, the knife shoots and there is no backlash.
Of course, they fit well from the factory, there is no need to polish anything.
Next, let's pay attention to the blade. This is a thin-beveled wharncliffe, such a light bitblast, I think it will not be thick.
Now we will check it. I look at it myself, then I show it to you.
In the area of 3 mm, that is, it is not a four, but somewhere 3 and less than a millimeter.
It will cut perfectly due to the thin bevel, due to the descent from the spine and due to the thin spine itself.
The spine, as I said, has a processing, the inscription of the manufacturer RAIK.
And then we look at what kind of steel we have here. The steel is cool, Sandvik 14C28N, excellent hardness, stainless steel.
Not very aggressive composition, that is, the knife will work perfectly on products.
Those who are reluctant to use such steels as D2, K110 and others can safely buy Sandvik and work, cut sausage, bread and so on.
Marking model P831SF. There is a chisel for sharpening, there are no notches because the spine is not thick.
Let's see how the knife is located in the hand. There are no notches, but due to the spine, the thumb is in place.
There is a finger-to-finger notch, yes, there are no notches here on the handle.
Perhaps if your hands are wet, it will be slippery, but for an ordinary EDC, the grip is quite normal.
So, this was information about RAIK, model 831. Now let's take a look at the knife that will also participate in the draw, model FH922.
This knife has already been on our channel, so let's take a quick look, because it has only one difference from the previous model.
This is the material of the handle. There we had an orange G10, here we have a carbon version.
At the same time, it is completely black, that is, almost a ninja, so-called. Dark carbon, black liners, black clip and black blade.
In general, everything is black, we have such an interesting knife. The mechanics are super.
In general, those who are interested in a full review, there is a video on the channel, you can watch it there.
Now let's evaluate the knife visually. It was this model that the subscribers of the Telegram channel chose.
Here is such a black carbon version of the G10. In principle, it looks good, this is how it is located in the hand.
By the way, I forgot to check the weight of the RAIK and show the operation of the lock.
That is, you open the knife, lock it and you can calmly work with it, without being afraid that the blade will fall on your fingers.
So, the weight is only 93 grams with the length of the blade. If you measure from the beginning of this handle to the tip, it turns out to be about 85 millimeters.
93 grams and 85 millimeters, as for a steel handle, I consider a good result.
The G10 weighs 110 grams with a blade length of 85 millimeters.
So, we considered these two knives and now I will announce the conditions of the draw.
So, the RAIK knife will be given away on the 30th on Saturday at the exhibition in Kyiv.
The link to the exhibition will be in the description of this video. The entrance is free, you only need to register.
Further, for those who will not be able to get to the exhibition, we will give away this G10 online. What do you need for this?
To do this, you need to write in the comments under this video what is your favorite knife or what is in your pocket at the moment.
Then take a screenshot of this comment, take a photo of this knife and post it in our telegram group in the corresponding section in the competition section.
Post a screenshot and a photo and among the participants at the exhibition on the 30th we will give away the G10.
There will be two main prizes, this is the RAIK and the GANZ, plus there will be additional consolation prizes from the full bag.
So be sure to come to the exhibition, there will be an opportunity to get this cool RAIK.
In general, I liked this knife, I liked it for its appearance, a good design.
Further, there are excellent washers, copper, perforated, ceramic detent ball, blocker, thin cutting wedge.
In principle, there is nothing to note about the minuses, so come to the exhibition on the 30th and take this knife.
Those who will not be able to come to the exhibition, write in the comments under this video what knife you like, what is your favorite, take a photo of it, post it in our telegram group and take this GANZ.
I will send it by mail to all participants, to everyone who wins.
The only condition is that he should be in Ukraine or his relatives should be in Ukraine, that is, the shipment will be in Ukraine.
Even if you do not win anything, you can get consolation prizes from the full bag.
They have already come to me and there at the exhibition, again on the 30th, for those who will not be able to win a knife, there will be an opportunity to pick up such cool chevrons from the full bag.
That's all, all links will be in the description of the video.
There is also a link to our telegram channel and to our telegram group, where all the conditions of the competition will be described in text for those who may not understand the video.
That's all, good luck to everyone, see you on the 30th of September at the exhibition and let's play these knives. Bye!

