I had to stop everything and make this dress | Romantic era day gown

Pre-modern Women's Fashion
181 followers
2 Video Views·Sep 24, 2023
Have you ever been so struck with costume inspiration that you had to stop everything
and sew? But then you remembered, no I cannot make this dress right now. My list of costume
ideas goes through March of next year. This fabric I bought has been sitting in a drawer
since last October. I've already made two dresses from the same era and I don't remember why I even
bought all of these hats. But then... I'm using the new Black Snail Patterns Day dress from 1837
to 1840, which I'm considering that close enough for an 1840s theme. I did make a mock-up of the
bodice but my only change was cutting the armholes bigger and using the largest sleeve size in the
pack. And here was my first mistake. Not cutting the sleeve lining on the bias like the pattern
said. My second mistake was not reading the part in the instructions which said the lining was
optional. Doing things twice unnecessarily is going to be a major theme for this project.
My fabric is a repro cotton print that I fell in love with from Maggie Mae Fashions and I'm
hoping it's thin enough to handle all the heavy pleating on the sleeves. These sleeves are quite
large. I managed to cut out most of my pieces from the fabric that I have but not all of them,
which means I need to go order a few more yards of fabric. And I should have known ahead of time
that I would have this problem because one, the pattern calls for 51 inch wide fabric and mine is
only 44 inches. And also my fabric is a stripe, which usually means you need to order more if
you want to match your stripes at your seam lines, which I do. Also I don't think that two widths of
the fabric is going to be enough for the kind of fullness I want in the skirt, which means I
probably need about another like 20 inches to add to my skirt. In the meantime I'm going to try to
find some contrasting fabric to make my piping and binding. This dress is based on an extant from the
and like most dresses of the early Victorian period, the seams are piped. The original has
silk piping, so I'm doing the same since I have tons of silk scraps in my stash. At first I thought
this blue would work since there's some blue in the floral print, but it doesn't quite match the
blue ribbon I plan to use for my belt. So I asked followers on Instagram to pick between a pale pink
and a cream color, the same fabric I used for my late 1840s bonnet. The cream won out, so I used
that to make my piping and started sewing the bodice and sleeves. The sleeves of the late 1830s
saw a dramatic deflation from the huge sleeves from a few years earlier. The giant lego mutton
sleeves in my dress were wrangled into tiny pleats held in place with two bands around the bicep.
I didn't really have a plan going into pleating these sleeves, so I thought,
what if I did cartridge pleats using my tiger tape as a guide to sew two even rows of gathering
stitches at the top of the sleeve? I've finished stitching the cartridge pleats for the cap of the
sleeve, and I'm starting to realize that that might not have been the best idea, because this is a
curved edge, and I need to make all of these pleats really straight up and down, and it's-
they don't want to sit straight this way. What I should have done is just pleated straight across
double rows of that, and then iron them down. I think I'm going to sew the other sleeve and try
it that way instead, then come back to this one and try to press down all these pleats,
or do something different. I don't know, I'll figure it out.
The second method worked much better, allowing me more control of the individual pleats,
so with the upper half of my sleeve completed,
I moved on to gathering the bottom of the sleeves and starting on the cuffs.
Except after completely attaching one of the cuffs by hand, I tried on the sleeve and...
it was way, way too long. I didn't even bother taking a pick before tearing off the cuff and
cutting a good three inches off the length of the sleeve. I reattached it by machine this time.
Well, I have assembled everything that can be assembled with the pieces I was able to cut out.
The rest of my fabric should be arriving tomorrow, but I'm a little worried that I'm
running out of time. I technically have about six weeks before my collaboration deadline,
however, I have a kid, so I can't sew all of that time, and I'm going to be gone
for two weeks of it on a long road trip. I will have about one week between when I get back and
the deadline, so I'm hoping I'll be able to finish up anything that hasn't been done by then.
However, I also wanted to make a bonnet for this project, and I have all the supplies,
but I haven't even started it yet. It's not an absolute necessity that I have it for this dress,
but I would like to make it. I had another accessory in mind that I wanted to create for
this costume, a lacy fichu or shawl to wear over the dress. In the 1830s and 40s, women used fichus
over their dresses or tuckers underneath to fill out the wide necklines for day wear, and seeing
as this dress is very off the shoulder, I thought a fichu would help bridge this dress between day
and dinner. And on a recent antiquing trip with fellow costuber Sam Snow, I found some 12 yards
of this vintage lace. It's about seven inches wide and a little dingy, so I washed it on the
lowest setting on my washing machine. I loosely based my fichu shape on Black Snell's pelerine
pattern. I traced it, then laid it on my dress form to work out the shape I wanted, which was
something like this. Looking at it flat, this is just one half of it. It doesn't look that much
like the examples I found online, but it works on the dress form, so I guess it's okay.
Most lace fichus from this time were designed in their finished shape, but I'm making mine by
layering strips of lace and sewing them together using my pattern as a template.
They just don't make lace shawls like this anymore. The struggle is in adapting straight
trim into a curved shape. At each point, I gathered the lace as tight as I could,
and at the center back, there is a seam on the upper two tiers of lace.
Originally, I thought I would just hand sew this over layer onto the first layer,
but now I realize that's probably a waste of my time, because I can just machine stitch,
and it will be hidden in this detailing right here. So I think that's what I'm going to do,
at least for this section that I just basted.
After sewing one layer, I trimmed the excess from the back,
but I hit pause on the fichu because the rest of my fabric arrived.
So I had cut another panel to insert into the skirt, and I just sewed that seam line,
except I realized I didn't. This is the skirt panel. I just ended up sewing the two
existing panels together. So now I have to take it apart.
Once that error was corrected, I moved back to the bodice, attaching the shoulder yoke bit to
the lining, which I had to piece together because even with the extra fabric I bought,
trying to get all the stripes lined up perfectly required some fussy cutting.
I'm just doing a quick try on to see if I have enough arm movement, and I do think I need to
make the armholes just a little bit bigger. They will get bigger because there's still seam
allowance on this, but this sleeve armhole opening is right on the biggest part of my bicep,
so I need a little bit more room.
Well, now that I have both sleeves sewn, although they're not attached to the bodice yet,
I have a giant mess that I need to take care of. One of my main problems is that I have
several pattern pieces just loose out and about, and that's because I ran out of these envelopes
that I tend to store my patterns in, so I got some more. So now I need to take a few minutes
to just go through this whole pile and sort all of my pattern pieces into envelopes.
And now I have the space to finish the fichu. There were many small tears in the lace that
I had to fix with a few hand stitches. I have been sick for the past three days,
thanks to the toddler, so I have gotten no sewing done, which is not good.
Oh, and if you bet that the pile would return within three days or less, you would be correct.
So my only goal for today is to bind the bottom edge of the ruffle with silk and gather the top
edge so I can attach it to the bodice. If I can get that done, I will consider today a success.
I managed to power through and get more done, like attaching the ruffle to the yoke, except
the yoke portion ended up being kind of poofy when it's supposed to lay flat. So,
of course, I took it apart and I fixed it and I reattached the ruffle.
Next came adding the waistband, but I needed to shorten the bodice length first.
Oh, and did I mention that I cut the waistband piece out twice because I misread the instructions?
Yeah. For the back closure, I'm using some hook and eye tape, which is great because
that means I don't have to sew individual hooks and eyes because knowing me, I'd have to do them
twice. By now, I had been working on this outfit for weeks and maybe it was the fever. Maybe I read
too much into Bo Burnham's Inside, but I was starting to feel like I was trapped in my sewing
room. Luckily, it's road trip time. I am back from my vacation and I only have a few more days
to finish this outfit, but luckily I only have to work on the skirt. Skirts from this era were
usually leveled at the waist rather than the hem, and since my last couple of attempts at leveling
on a dress form were pretty frustrating, I decided to go for the old-fashioned method of just
shortening the center front waist by about an inch and a half and grading to nothing in the back,
since your backside tends to be a little bit longer than the front. I also wanted to add a
pocket, so for this I just traced a pocket shape on some scraps. I would have made this bigger if
I had had bigger scraps left over, but this was it. It's big enough for my phone and that's all
that really matters. Also, I should have inserted this pocket when I sewed the side seam to the
skirt. Instead, I had to rip a hole in the seam line and stick the pocket in after the fact.
Do as I say, not as I do. Since I used two and a half panels of fabric for the skirt, the center
back didn't fall nicely on a seam line, so I had to cut my own center back opening and hand sew a
narrow hem. For the hem of the skirt, I wanted some extra poofiness, so I added a hem facing of
tarlatan lined with muslin. If you saw my 1840s ballgown video, you'll remember that I tried using
this stuff to stiffen that skirt, but it was way too unwieldy, so I replaced it with cotton organdy.
This time around, I'm only supporting the bottom 18 inches with tarlatan, and I worried that
that might be too tall, that I should cut it to 12 inches, but images of extants from this time
show very wide hem facings, and if it's too long, I can always just cut it down later.
And lastly, even though the original skirt has a combo of knife pleats and gathers, I chose to do
cartridge pleats. You do have to sew these things by hand, which takes time, but whenever I try to
do knife pleats, I always end up refolding them like three times before I'm satisfied with the
way they look. They never seem to be symmetrical or evenly spaced, and using the tiger tape method
for cartridge pleats makes things easy. I just follow the lines and don't have to think about
it too hard. I'm not overstating when I say this outfit turned out great. Everything fits, nothing
is too small or too big, I have a bit of wiggle room in the bodice, the skirt isn't too long,
the sleeves are a good length for this style, and it fits across the shoulders.
I think the ruffle really helps to emphasize the hourglass shape, and I love the subtle
contrast piping. And since women probably wouldn't have had bare shoulders at a daytime event or
outdoors, I have the fichu to go with it. I'm so happy with how this thing turned out, especially
since I was basically winging it, and I was not sure the best way to assemble the lace into
something wearable. As much as I enjoy this dress plain, I love the addition of the ribbon belts
from Les Bon Robins, and this cute e-belt buckle from Ensembles of the Past. When I wear the fichu,
it hides the pretty ruffle in front, but that's okay. It's nice to have different looks with the
same dress. I wore this outfit to an 1840s themed tea at Laura Ingalls Gunn's house. That video will
be out on her channel for Costume Symposium, which starts this August 19th. She's also making other
videos all about tea traditions and decorating ideas for an early Victorian tea party.
Tiffany from Stitchin' Addiction was also there, and she and Laura made variations on the same
dress. And we'll have a cozy video all about that. I will link to both their channels below.
I'll see you in a couple weeks for cozy, where I'll be hosting the hashtag cozy tea party on
Instagram and sharing a new video on advanced bust adjustments for historical sewing patterns.
Until then, happy sewing!
