Thế Nhân|| Thử Nghiệm Chế Công Cụ Tạo Rãnh Gieo Hạt Đưa Vào Ứng Dụng Trong Thực Tế Liệu Có Khả Thi ?

Ok, hello everyone. Welcome back to the Thien Nhat Vlog channel in Africa. Today, I'm going to make a tree like this. I downloaded it on the Internet. I think it's a good idea to make a gap in the middle of the tree. This is a Vietnamese tree. I will use it to make a gap like this. Let's see if it's suitable for this tree or not. When the soil is wet, I will use this to make a gap in the middle of the tree. When I put the paper in, I will use this to make a gap in the middle of the tree. Now I'm going to see if I have time. If I have time, I will bring out the test board. Today is tomorrow. I found this on the Internet. I will try to make it as close as possible. 100% is about 85-90%. Ok, now I will proceed. Now I'm going to do it. It's very rare to find a tree like this. I cut this tree from an old tree. This is an old tree. This tree is about 3-4 meters long. Now I'm going to use this tree to make a gap. Can you do it? This tree is about 3-4 meters long. Now I'm going to use this tree to make a gap. This is an old tree. The trunk is thick. This is an old tree. I broke this tree. But this old tree is very hard. This tree is about 3-4 meters long. Now I'm going to use this tree to make a gap. This tree is very hard. Extremely high quality That's it I have to say that the food in the past was extremely high quality Now I have used the wood The wood is quite thick Now I will cut it according to the color I will cut it according to the color of the image Do you want to put it? Yes I will cut this part This part should be on one side It should be on the other side You understand? I will cut this part This part too Here These are the tools that I use to cut the wood to make sure the wood is strong enough to hold the saw blade in place. I have a thin saw blade here, but it won't hold the saw blade in place. So I have to use an old saw blade to make sure the wood is strong enough to hold the saw blade in place. I'm going to cut this wood to make sure the saw blade is strong enough to hold the saw blade in place. Now I'm going to show you how to cut the wood to make sure the wood is strong enough to hold the saw blade in place. Here I am, cutting the wood. This is the form of the root of the tree This is a root of the tree So I have to cut it like this It's a long root in this shape I will cut 18 cm on the back 18 cm 18 cm is too much Because of this they instructed me to do this but there is no specific number So I will cut it If you cut it off, you can't put it back in, it will lose its shape. If you feel it's too big, you can cut it off again. Now I'm going to cut it close to the body. Do you know how to cut it? Yes, I do. This way? Yes. This way? Yes. Now I'm going to cut it close to the body. Do you want me to cut it? No, it's fine. Just a little bit. Now I'm going to cut it. Like this. It's too big. I'm going to try. This is the head. It's like a massage. Like this. Now I'm going to cut it close to the body. Like this. I haven't used this for a long time. I haven't used it since the beginning of the new farm. But I don't know how to use it. Because there are a lot of weeds here. I don't know if this can be used. In Vietnam, there are a lot of weeds here. I don't know if this can be used in Vietnam. I haven't used this for a long time. I'm going to try it today. If it works, it's good. If it doesn't work, I'll accept it. This is the head. I tried it the other day. It's very good. It's great to use it to cook noodles and potatoes. It's also good to use it to cut grass. But the other day, the snake bit me. The snake bit me. I think it's better to use a 10mm iron. I use a 10mm iron. But the soil is very hard. You can see the soil. It's very hard. I hope that when the rain comes, the soil will be soft. Then I can use it very well. If I use a 10mm iron, the soil will be very hard. So I use a 10mm iron. I used to put an iron here. But there is no iron like this in Vietnam. This iron is more than 1mm. This is the iron I got from the farmer. The other day, there was a hole in the iron. The iron was not strong enough. So there was a crack in the iron. So I put in a new iron. I put in a new iron to make it stronger. Yesterday, there was a rain. Yesterday, I went to the garden and there was a rain. That's why it's very lucky. So the corn is very good. Now I have just made this. I made a hole to put the corn in. Now I'm going to make a frame to put the rice cake in. This is the frame. Now I'm going to make a cannon. The other side goes in. Do you know what I mean? This one goes in here, and the other one goes in there, and the other one goes on the other side. Do you understand? Quota 4. Quota 4 is about 25 centimeters. Quota 4 is 25 centimeters. Now, I will show you how to cut the V-shaped boards. The V-shaped boards are stiffer than the other boards. The V-shaped boards here are only 1mm thick. So I will cut the V-shaped boards. The V-shaped boards should be folded into a box. OK, everyone. This one, because my brother Tien Thanh's equipment is a bit dull, so now it's just like this. Because it's the first time, there are some things that need to be cut to make it suitable. So it's a bit sad, everyone. This one will continue tomorrow. Because of the use of your materials. This one is a stick. The stick is used to cut the V-shaped boards. It's very tough. So the old V-shaped boards, I used to use these tough boards. To make it quality, everyone. You can see it. It's a bit dull. It's a bit dull, but you can see it. This one is not like that. Tomorrow, I will use this to cut the V-shaped boards. Here, I will roll a U-shaped board. After the U-shaped board, I will drill 2 holes. After that, I will drill a hole in the middle. On both sides, I will put the V-shaped boards in here. After that, I will put the V-shaped boards in here. I will continue to work on the missing parts tomorrow, and when it's done, I'll put it on the board and show you how it turned out. I don't know how it will turn out. I may not be able to do 100% as shown on the screen. But I will try to do my best to fix it. I will try to fix the missing parts.