Hướng dẫn gấp chiếc máy bay giấy cực sáng tạo _ Mĩ thuật sáng tạo

Mỹ thuật sáng tạo
9 người theo dõi
17 Lượt xem video·20 thg 9, 2023
Hello everyone, welcome back to my creative art youtube channel.
Today I will show you how to fold an airplane.
Please follow and fold my airplane.
I will prepare some paper like this.
What color to use?
I will use green.
The sky is quite beautiful today.
First, prepare a piece of paper.
Usually it will be like this.
Fold the back and front.
You will fold this paper in half.
Please pay attention.
Fold these two edges together.
The other side is the same.
Adjust so that the edges are aligned.
Fold down.
Mark the middle point.
After creating this line, I will put this circle.
Use this middle line.
I will fold it.
Align this edge with this straight line.
Mark the same way.
The left side is also on and below.
First, I just press lightly.
If it is aligned, you will know a tighter line.
After folding like this, you continue to fold down.
You continue to fold and hold the top.
Hold the top with your fingers.
The middle part.
Fold close to the middle point.
After holding these two fixed points, you continue to press down.
Press down and mark the tight spot.
The same as the right side.
Fold the left side in half.
Hold the top with your fingers.
Make it tight.
If you want the plane to fly, the top must be aligned.
Otherwise, it will not fly.
After the two points are aligned, I will adjust the bottom point.
Press down.
Put the paper down.
Press down.
Make it tight.
After folding once and twice, turn the paper back.
Turn it like this.
Fold it in half.
The two lines will meet at the cutting point.
But the top must be aligned with the middle line.
Hold it.
The top must be aligned with the middle line.
Do not turn it.
The two points are aligned and still get the cutting point.
When you get the cutting point, press the paper down.
Make it tight.
When you get the cutting point, look at these points.
The cutting point is behind.
Hold the top with your fingers and press the middle point.
At first, press it lightly.
When you feel it's right, press it again.
Do the same on the right side.
Press it tightly.
The two points are aligned.
Press it down.
After pressing it down, fold it in half.
The paper will be hard when folded.
It will be harder to press.
So you have to be a little stronger.
Fold it in half.
Hold this point.
Hold it.
The top is quite hard.
The paper is thick.
Press it down.
The right side is the same.
Press it down.
The paper is harder when pressed down.
Press the two points together.
Press the top.
After pressing it down,
fold it in half.
To make the shape.
After making the shape,
we will cut it to the shape of two wings,
The body is also important, but the wings are also important.
There is a part for the plane to fly higher and more accurately.
After getting the front like this and the back like this, we open it.
Can you see these lines?
We lift this up, lift it up, open it up, this is another basic line.
There, this line too.
The part that is bent inside, we push it out.
Tighten it.
Similarly, this inner part, I also push it up.
Push from above, push it all out.
After the adjustment is correct, take it out, then screw it.
Ok, after screwing these lines, the lines are glued.
Next, we will turn the back again.
Our back is like this.
We turn this part up.
How to turn it?
For this part of the plane, can you see the back?
There are two points behind.
We fold it so that these two points are parallel.
The nose of the plane must be on a straight line like this.
These two points are parallel like this.
Then screw it.
After screwing it, we fold the plane in half.
Screw the head again.
After getting it like this, pay attention, we will fold the wing of the plane.
This is half of the plane.
We fold it down and turn it out like this.
Fold this wing in half again, from the top to the bottom.
Make sure these two lines are parallel.
For the head, you guys do it slowly.
Screw a little bit here, so it's easy to fold it in half.
Screw it gradually, don't screw it all at once.
It will form quickly.
Screw from the top.
Similarly, we also fold this part in half and screw it.
Adjust from the top to the bottom.
This plane will fly higher or lower than the plane we usually fold.
So we still have to be calm and careful.
After all the lines are parallel, we adjust the tail of the plane.
We screw the tail from the top to the bottom.
After creating the basic shape of the plane like this,
we pay attention to the tail.
If the tail of the plane is not tilted, we will fold this tail a little bit.
So the plane will fly higher and more accurately.
Like this.
The tail of the wing should be parallel to the body of the plane.
Similarly, on this side.
Do you see it parallel?
Now we have to do this.
You have to fly high.
We will see a plane that flies quite high.
It looks special too.
Guys, I just finished folding a plane.
Thank you for watching and folding the plane with me.
A simple plane with a simple paper plane.
Simple color.
But it's quite an interesting plane.
Thank you for watching.
Goodbye and see you in the next videos.
