Bio: Manijeh Razeghi received the Doctorat d'État es Sciences Physiques from the Université de Paris, France, in 1980. After heading the Exploratory Materials Lab at Thomson-CSF (France), she joined Northwestern University, Evanston, IL, as a Walter P. Murphy Professor and Director of the Center for Quantum Devices in Fall 1991, where she created the undergraduate and graduate program in solid-state engineering. She is one of the leading scientists in the field of semiconductor science and technology, pioneering in the development and implementation of major modern epitaxial techniques such as MOCVD, VPE, gas MBE, and MOMBE for the growth of entire compositional ranges of III-V compound semiconductors. She is on the editorial board of many journals such as Journal of Nanotechnology, and Journal of Nanoscience and Nanotechnology, an Associate Editor of Opto-Electronics Review. She is on the International Advisory Board for the Polish Committee of Science, and is an Adjunct Professor at the College of Optical Sciences of the University of Arizona, Tucson, AZ. Dr. Razeghi is a Fellow of MRS, IOP, IEEE, APS, SPIE, OSA, Fellow and Life Member of Society of Women Engineers (SWE), Fellow of the International Engineering Consortium (IEC), and a member of the Electrochemical Society, ACS, AAAS, and the French Academy of Sciences and Technology. She has authored or co-authored more than 1000 papers, more than 30 chapters, and 18 books.
Abstract: Nature offers us different kinds of atoms. But it takes human intelligence to put different atoms together in an elegant way in order to realize manmade structures that is lacking in nature. This is especially true in III-V semiconductor material systems. Guided by highly accurate atomic band structure simulation, modern semiconductor optoelectronic devices are literally made atom by atom using advanced growth technology such as Molecular Beam Epitaxy (MBE) and Metal Organic Chemical Vapor Deposition (MOCVD). Recent breakthroughs have brought such quantum engineering to an unprecedented level, covering an extremely wide spectral range from 200 nm to 300 μm. On the short wavelength side of the electromagnetic spectrum, we have demonstrated III-nitride light emitting diode emitting in deep ultraviolet to visible. In the infrared, quantum cascade lasers (QCLs), and focal plane arrays (FPAs) based on quantum-dot (QD) or type-II superlattice (T2SL) are becoming the choice of technology in crucial applications such as environmental monitoring and space exploration. Last but not the least, on the far-infrared side of the electromagnetic spectrum, also known as the terahertz (THz) region, III-V semiconductor offers a unique solution of generating THz waves in a compact device at room temperature. Continuous effort is being devoted to all of the above mentioned areas with the intention to develop smart technologies that meets the current challenges in environment, health, security, and energy. In this talk, the latest advances in III-V semiconductor optoelectronic devices at the Center for Quantum Devices, Northwestern University, will be presented.
Thank you very much and good morning, good afternoon.
It's a great pleasure and honor to be in this university,
but I believe that the sound is not very good,
but especially I'm a great honor professor
because that's the proverb from Italian.
They say that poor professor, that his or her student
is not much better than him or herself,
and it's been my case.
All of my students, they are the best.
That is one, and another one, Professor Ryan McIntosh
that is sitting here,
and going to do some presentation for you.
I know that after Professor Lubochtan,
here we are dealing with the student,
greatest student of the great University of Urbana-Champaign.
You have to be proud because your university,
especially ECE department that is a part of my background,
is one of the best in the country,
and that is a great honor for me today
to speak for you, to all of you,
and to give you a little perhaps the flavor
of the research and science and to be a student,
and especially in this time of the world
that is the best time because you have a lot of opportunity
that a small part of that I would love to give it to you
in a short time.
I have to go, unfortunately, very fast
because we have not enough time,
but at the same time, I try to be a kind of,
to give you some, I hope, inspiration at the end.
So for the last century, the most important achievement
in physical science, it was understanding of the,
it was understanding of a structure of atom
thanks to quantum mechanics.
And in information science, it was discovery
and the development of computer and internet
thanks to electronics, and understanding of the genes
and cell structure thanks to genetics.
One of the important things that we discovered from that,
one part, it was semiconductor, a small part.
And I'm going to explain as the title of my talk,
what does mean semiconductor and what we can do with it.
So if you are coming to say what, why semiconductor?
The needs of each individual in the society,
from food, energy, transportation, communication,
entertainment, health, medicine, exploration of space,
underwater, needs one reliable photonic
or electronic device.
So let's understand what does mean really semiconductor.
All of you, you know, if we take very small part
of periodic table, and if we came to the colon four,
we have carbon, silicon, and all of that,
we say that if we put silicon carbon
at the last energy level of each element,
we have four electron.
And if we put two of them together, we have eight.
If we come colon three and colon five,
at the last energy level, we have three electron,
and in the colon five, five electron,
five and three is eight.
And two, six is exactly the same thing.
I'm not going to tell you why eight,
because from the quantum mechanic first year, you know that.
But if you have one isolated atom,
the last energy level, we say that that is the balance band.
The energy that is the higher and empty,
we say that is the conduction band.
So the distance between that, we say energy gap.
And this energy, if it's more than two electron volt,
we say that we have the isolated material.
If that is less than four, six electron volt,
we say that we have the semiconductor.
If it's very small, we say that that is metal.
So we are speaking about the semiconductor.
And the energy gap, if you are coming
to put this value together, lambda is the wavelength,
and that it becomes a gaunt that is energy gap.
Any wavelength from the deep UV,
that is 200, 100 nanometer, up to terabytes,
that one, 300 micron, that we can come up
with the atomic and gap engineering
of these three, five semiconductor, we can do that.
Here I have the balance band, conduction band,
and by atomic engineering and gap engineering
to have binary, ternary, quaternary,
we can come up to manipulate this material and gap
in order to go very short, very low energy gap,
and long wavelength, up to 300 micron,
or very high, like the gallium,
six of the aluminum nitrate that I'm going to explain to you,
that's six electron volt and come to 200 nanometer.
Now, if you have only three, five,
to put together, you cannot do anything with,
because it's eight and there is no more space for anything,
and they don't love to collaborate
or to answer to any external field.
But now it become to change one of the element,
colon three, with the colon two.
In this case, instead of seven, instead of eight,
we are going to have seven, so we say that p-type doping.
If we increase one of the colon six, as an example,
to have, instead of eight, to have nine electron,
we say that that is the n-type doping.
And by doing the p-type and this atomic engineering,
I'm going to show you what we can do
and using at the same time the difference,
important technology that we had in the last century.
The most important, it was the bulk crystal growth.
Why?
Because any nanotechnology that we are doing,
we need to have a support that to put all of this atom
to do atomic engineering and layer by layer
to put on top of that.
So that is the bulk semiconductor,
Chokralsky, Grieg-Richman, et cetera,
and you can have the substrate.
Now, we need to have epitaxy.
Epitaxy, in order, all of this element,
we can put that together and to do the atomic
and gap engineering.
So epitaxy, you have liquid phase epitaxy,
MBE, MOCBD, and at the same time, MBE,
that all of that you have here
in the engineering school, beautiful facility.
But at the same time, we need photolithography.
Without that, we cannot do anything.
We put everything together
and we come with the semiconductor quantum device.
It means that a small dimension.
Now, if you come to combine the quantum mechanism,
as I mentioned, and with the exactly atomic engineering
and the epitaxy, we are coming to have,
if you have simple quantum semiconductor,
such as gallium arsenide.
In this case, if you have the bulk material,
you use the density state as function of energy gap,
that is parabolic.
It means that the electron can have any kind of energy here.
But if we come to take one of the degree of freedom
of the electron and to come with the, again,
epitaxy and photolithography,
or especially the using quantum mechanics
to do superlattice, in this case, density of state,
it become a state block behavior.
So we have, again, better, the electron has
maybe one degree less freedom we can control.
Now, if we come and to take with the photolithography
to do something that block nanowire,
it means that the two-dimensional confinement,
to take the two degree,
come with the freedom of the electron state,
the energy state, it become much more quantum.
And now the best one, if we go to the quantum dots,
in this case, the energy of each state,
it becomes completely, completely quantum
and no more phonon.
So we can have, we say, quantum dots.
So last century, we understood the structure of atom.
This century, we would love to make quantum,
artificial atom, quantum dots.
Last century, we understood the structure of the molecule.
This century, we would love to do artificial molecule
or artificial molecule or quantum wire.
And with that, we can really revolutionize
and to do, to help human.
For me, my inspiration come from nature.
But all of the scientists, I'm sure they are similar,
take the, and while we are mimicking the nature,
take the human sense, sight, hearing, smell, taste, touch,
we found that now all of them is quantized.
It means that multi, multi-million of the small sensor
giving all of the information through the signal
from various sense in a body are carried to the brain
through the neuron, exactly as you can see here.
Go to the brain with a little energy
that I saw in one of the professor visiting
and I saw similar with the experimentally
coming to this kind of the understanding and result.
And it's only 37 millielectron volt.
For your information, KT is 25 millielectron volt.
And it's go to the brain.
And to go to the brain, what is the role of the brain?
Signal processing, cognition, emotion,
judgment, memory, et cetera.
But nature is not perfect.
Look at our eyes.
Our eyes that exactly we discovered
that is the multi-million of rods and cones
that contain the photosensitive pigment
and light can extract the pigment
and cause the pigment to release energy
and by that we can see.
But if you come to the eyes,
unfortunately our eyes cannot see
all of the electromagnetic spectrum.
We can see only a small part.
It means that only the part of the visible,
400 to 700 nanometer.
So what we need?
We rely on technology in order to go to the farther.
And one example is exactly the focal planar
and the artificial eye that is here
that we are showing you that we can see at night.
We can see the very wavelength range
that the eyes cannot see.
So here you are mimicking the nature.
It means that equivalent of the eyes,
we are using 3-5 semiconductor.
And to do the arrays of the detector
and that's the detector as I explained to you
from the colon three, colon five,
mixing together and to have atomic and gap engineering.
And equivalent of the brain,
you are putting the microprocessor transistor
because here's the detector and it's coming
and transistor and can have the information
and we can see far, UV or infrared.
Now for that, for your information,
like most of you, my PhD it was in physics
and completely difference the area than semiconductor.
So I was curious, especially I was curious
about semiconductor laser.
So in 1980, 81, I finished my science doctorate in Paris.
I went to Thomson Central Research Lab
for to learn about technology.
And I went for one month and I stayed up to the 1991
that many places including in this prestigious university
when Bardeen was there
and at the same time Professor Hollonyar.
But finally the Northwestern, they sent me this picture
and they came two, three times.
The dean came in France and they sent it here.
They send that because they were building
just on the lake, the building that they said,
if I'm coming, they're giving me
the last floor of the building.
So I came and I started from 1991
and that is the things what you're doing.
First of all, I try to create the
solid-state engineering curriculum undergraduate, graduate.
The way that I did, I understood,
and I found that the student needs to learn.
And for that, I created three textbook
and I encourage all of you,
if any part of my talk that you cannot understand
because everything you have a copy,
you can go to one of these book
and you can have the answer.
And especially this book, again, is the Emotivity Shallowing
that is the first gallium indium arsenide,
indiophosphate, superlattice that I did
and the first group that they appreciated
was Professor Holonyak and his student in the United States.
So that, I created the center.
And center, I put the name Center for Quantum Devices.
And after coming from the industry,
such as Thomson, that it was prestigious,
and that, but I knew what's the problem
of this kind of research,
I tried to create a center that is multidisciplinary
because everything that we do today
is really multidisciplinary.
You cannot do anything if you don't know
physics, chemistry, and biology.
We do first, for anything, you need mathematics
and you need the modeling and to do the calculation.
So we do the device processing, the device modeling.
And after that, the material.
Material, MBE or Emotivity that you have,
all of you, you have here,
for to grow this kind of material on that.
We have the characterization,
optical, electrical, structural.
Coming device processing.
Coming device measurement.
Everything, and up to the system
that you have the two example here
that we are going to demonstrate to you.
What we do.
Atomic engineering, gap engineering of T5,
as I explained to you,
from deep UV, 200 nanometer, up to 300 micro.
I'm going to give you only an example
of one part UV part, emitter and detector,
and infrared emitter and detector.
So, first of all, all of you,
the basic of the detector,
or the basic of the lasers or LED,
with the same structure, you can come here.
That is the forward bias.
And here is, we have, okay, that is the,
unfortunately it's not working for the,
because they try to take the copy for that.
So, that is matter.
But that is that.
The same structure, pin junction,
if you do forward bias is the lasers,
LED, reverse bias is detector.
But if you are, yes, it start to work, sorry.
Okay, and that's here.
You see that, all right.
And that this one create a current,
and we can measure.
Now, as I mentioned,
you are going to do for any wavelength that we want.
So, for any wavelength, if you come for the lasers,
that is the, in general, we have two kind of the laser.
We have inter-band and inter-sub-band.
Inter-band in order that to the material
that the gap is larger than KT.
So, in this case, we can come,
and to do the forward bias,
and we have the hole is go to the balance band,
that the electron come to the conduction band.
They have the combination, and the light is coming out.
Unfortunately, it's not again,
the animation is not working here, doesn't matter.
And that, no, if this energy gap is very small,
and if you want to have the infrared lasers,
we cannot use that.
So, we go to the, again, quantum mechanic,
and we go to the conduction band,
or balance band of the super lattice.
So, we have the mini band,
and in this case, we can have the interaction
between the mini band, and to have the lasers
from any wavelength that we want.
So, now, okay, that is going to work here.
You see that here, that's the inter-band lasers.
And here, you have the inter-sub-band lasers,
as you can see.
So, that is the way that you can have.
Now, that is for laser, but what about the detector?
In the detector, it's exactly the same.
That's, again, the laser, inter-sub-band laser.
The basic is very interesting,
because quantum cascade laser that is developed
at the same time at Bell Labs,
and that is very interesting,
because you can come to do the gap engineering
for the conduction band, and to do the calculation,
and with that, you can put many difference.
Again, if it's working, it's not working here.
Okay, you can put many different stage here together,
and to have a lot of high power to come out.
And I'm going to show you to see that how it's possible
to have a lot of power to come from the teeny diode lock
that you are going to see that.
Now, for the detector, it's exactly the same thing.
Okay, so you see that here, okay, and that,
that's exactly, that's based on the transport,
and based on the tunneling in the superlattice.
And now, for the detector, it's exactly the same thing.
So, if I'm coming, if I have the infrared,
I want to show infrared, the same thing,
I'm going to use the interceptor.
It means that here, the photon, infrared photon,
can come and to be absorbed,
can come and to go, sorry, can come to be absorbed
by the electron in the energy, in the lower energy gap,
and to go to the higher energy gap,
and after that, if we put a bias,
we can have photocurrent, and we can have the detector
at any wavelength that we want.
So, that's the basic that we say that could,
quantum well infrared photodetector.
If instead of the, in the quantum well,
if you put the dots, we say that quantum dots
infrared detector, or if you put the dot in the well,
we say quantum dots in the well could weep.
So, all of that, they are based on the atomic engineering,
and to have the difference wavelength for the detection,
that you are going to see one of that,
again, we are going to demonstrate that.
So, I'm going now to the part of the UV part.
Very fast, why?
Everything that you do, always,
the first question is why you are doing?
You have to find the application,
and application is here for the UV.
There are many from the bio, from the space application,
because the ozone between 200, 80, 320 nanometer is OPAC.
So, for to have the information,
or the communication above ozone,
we need to have all of the optoelectronic device
that is the shorter wavelength.
So, here, again, we do atomic engineering.
How?
With this material, colon tree,
aluminum, gallium, indium, and nitrogen,
and you can look at the symptom of the brown
that is going for the shorter wavelength.
And for that, when you do that, what you need,
look at here, all of you,
that's the energy gap of this material
as function of lattice parameter,
because you do the crystal.
You are creating the crystal,
and crystal has a lattice parameter.
So, if you have aluminum nitride, gallium nitride, indium,
you can see that you can go from six electron volt,
come to the infrared.
It means that from deep UV up to infrared.
But there is one thing,
I mentioned that we need to do the epitaxy.
But for the epitaxy, unfortunately,
we need to have the substrate, I explained at the beginning,
and the substrate has to have the same lattice parameter
of this material in order to not create the defect,
because one defect in the detector increase the dark current,
one defect in the laser active layers kill the lasers.
So, we want the material to be perfect.
And so, for that, unfortunately, we have not.
That is one of the problem.
And you have to know,
God didn't give everything to everybody.
So, we have the advantages, the disadvantages.
But that's the human brain,
and the intelligence of all of the student like you
to find a way to make it useful.
So, that is the case,
but we need now, after that, we need the epitaxy.
That's the reactor that I developed
when I came to Northwestern,
with the extra for this kind of the nitride.
For the group three, we say that MOCVD,
what does it mean?
Organometallic.
Because for the group three, gallium, indium, aluminum,
we use trimetal, triethyl, a kind of chemical,
organometallic chemical of this element.
And for the group five, we are using ammonium.
We say that hydride.
In the doping end top, use colon four, silicon.
And for the P top, use magnesium, colon two.
And this kind of material has to grow
at very high temperature, why?
Because any crystal that you want to fabricate,
you have to see what is the melting point of the crystal,
so at least the growth has to be
about two-thirds of the melting point.
So that is that this material, the melting point,
is very hot, so we need to go to the very high temperature.
And now, we need to do characterization.
As I mentioned with that, we can go with this material,
if I have aluminum nitride and gallium nitride,
if I put gallium, increase the gallium
to aluminum, gallium nitride,
you can tune and to have any wavelength
that you want in ultraviolet.
That it was the part of the PhD of this gentleman,
Professor Ryan McIntosh.
After that, if you come to the end top,
it means that to the visible part,
to the indium, the gallium nitride,
if you increase gallium, indium to the gallium nitride,
you can go toward the visible,
and at the same time, by the inter-band, inter-sub-band,
you can go to the very far.
That was the work of the Professor John Byron.
Now, what we do, epitaxy.
As I mentioned to you, unfortunately,
we have not the lattice mesh substrate.
It means that when you are growing,
you use sapphire substrate.
Why?
Because it is hexagonal, the same symmetry
as the gallium nitride, aluminum nitride,
and we do, at the same time, atomic engineering,
and with the quantum mechanic structure of the LED
or the laser or the detector that we do
is very complicated in order to do the engineering
of the defect and to bring the best part
of the very high power, the LEDs,
or the high quantum efficiency detector.
Here, we have sapphire substrate.
Here, we have aluminum nitride.
Every nine plane of sapphire is equivalent
of the eight plane of aluminum nitride.
That is the structure that you can see,
and you can see that here, every nine plane,
we have one edge dislocation.
They are the area that have no defect,
and if you make the device here,
you can see that here, that is the way that we did.
It was the, all of that that I'm showing you,
it was the world's first demonstration
that yes, it's possible to do photodetector
and tuning by taking aluminum nitride,
not to increase, X is the value of the gallium,
of the gallium in the aluminum nitride.
So you are coming, gallium, aluminum nitride,
and you can tune, and this rejection ratio
that you can see, it means that five,
the five order of magnitude,
it means that they are, the material quality is very good.
And that, and you can find all of this information,
all of that is published, and you can see,
maybe you can find in the publication.
Now, we need that the symptom LED.
Why?
Because if you have, as an example, the DNA,
or anthrax, or any kind of this kind of material,
as an example, tryptophan,
if you have a LED at 280 nanometer,
and time, a few molecule of tryptophan
is going to absorb this wavelength
and to give the fluorescence.
So if you have the detector in the same range
of the wavelength, you can detect.
So that is the, you have the UV detector, UV emitter,
and a few molecule, you can detect.
That's the, is the basic of the biological
and chemical sensing.
And each wavelength that you can see,
they are very important, and it was,
all of the publication is here, you can find,
and it was all of that for the,
funded by DOD in general.
And we still, we are working,
but we need that symptom laser.
That was the first laser that we did long time ago.
Again, that's, I'm not going to the detail of that,
but you see that with this kind of laser,
with this kind of material,
you can have continuous wave, room temperature,
and very robust one, then you can do the really engineering
and to make the, to do the good quality epitaxy.
And now, if you are coming here,
I mentioned to you, we need at the same time,
the detector, we need the artificial eyes
to be sure to, we can see the UV.
To make this kind of focal plane that is here
is a very, very hard, and at the same time,
time consuming.
What we do, we mimic the nature.
We have the material.
With the material, with the photolithography,
we are coming and to have the pixel.
Each detector very small.
Here is 30 micron by 30 micron.
After that, is approximately,
is going to have more than 50 per 50
different stage of photolithography,
etching, passivation, et cetera.
But, we need equivalent, we need brain.
In a brain, we need exactly the same format,
but based on transistor.
That is only the things that we are buying
from the outside, that you cannot find in general
because all of that is classified.
But there are some that we can have,
and that we are coming, now we have to connect.
How we can connect?
We are putting indium bond, that you can see,
on each pixel, and indium bond on each transistor.
And after that, we do flip chip bonding.
Exactly as you can see here, we put that,
is the each detector now is in front of the one transistor.
And you can have 320 by 256, you can have 1,000 by 1,000,
and et cetera, that I'm going to show you later.
And after that, you remove the substrate.
You do the packaging, and after that, you can see the UV.
And that is the indium bond that you can see,
that what is the technology, really,
that is coming for the, how you have to control,
because all of that is a few micron.
And that is the world's first 289,
that's the PhD of Dr. Ryan McLeod.
I was in a meeting in Alaska for the DARPA,
for the same subject, and he did that,
he sent it there, and it was the first.
And at this time, we have the contact, again,
from the Navy, but he came now, he has the result
that at this time, the quantum efficiency
is about 80%, 90%, is much better performance.
But nature is everything monolithic.
We are speaking about the silicon photonic.
We want to put everything on the same, really, substrate.
So the best substrate at this time is really silicon.
Why?
Because silicon, you can have very large area,
and at the same time, is cheap,
you can have excellent performance,
excellent tera-transistor, everything.
Mechanically, it's very, very solid,
so we can put everything on that.
That is the result we started to do,
lateral epitaxial overgrowth of aluminum,
not just on silicon, and at the same time,
to do all of the characterization
that you can find the information here.
And we did some device, we did LED,
and we did, when the quality of material is not good,
the device, you can use the plasmonic,
and plasmonic can enhance.
So we did, at the same time, the plasmonic,
and all of this result is published,
and you can find that in the difference that I put here.
Now, coming to tell you, when we started in 1993,
that this material, aluminum nitrile,
it was the first thing that I started,
because the government wanted.
And we started everything from 1993,
you have here, all of the publication,
and most of them, all of these applied physics letters,
up to now, this part of the work,
that's the part of the professor,
the John Byron, that you can find all of that.
Now, I'm going to the other part,
that it was the UV, let's go to the infrared.
Infrared, why?
First, the laser in infrared.
There are many different applications,
again, as I mentioned, especially the gas spectroscopy,
and anything, that I'm not going to the detail,
because you can have the information from here,
but what we can do, we can do, again,
atomic engineering, of all of this element
of the colon tree.
And look at that, that's what we can do.
If you are coming here, now, exactly as I showed you,
we go to the interceptor.
Interceptor, and we do, again, the engineering,
and the quantum engineering, and at the same time,
we have to model the waveguide, the analysis,
all of that, that is the technology for the laser,
that we know.
And now, we need the reactor, in order to do the epitaxy.
Unfortunately, if you do that with MBE,
you cannot do that.
Why?
Because you have the problem with the phosphorous.
If you go with the MOCVD, you need,
for the one quantum casket, is the two,
three thousand, four, four thousand layer,
and you need to control atom by atom.
So, I came, and I tried at the Northwestern,
to develop, and that's the MBE, and MOCVD suit,
to put gas source MBE.
It means that for the colon tree,
to use gallium, indium, aluminum, all of that,
the gallium, indium, aluminum, that is metallic,
but for the group five, phosphorous and arsenic,
to do phosphine and arsenic.
By that, I can have the advantages of both technique.
So, for that, what is the final element that we do?
That is that.
Look at that, that is the laser here,
that you are going to see inside of that, very teeny.
And with that, that is the really,
more than four, five thousand layer, that you do,
and you can control with this kind of the technology,
atom by atom, and after that, you are coming
with all of the technology, everything, you come here.
Now, look at that, what we did.
That is the, theoretically, as I explained,
always in the, at first, it was the ideas
of the Leo Isaac Nobel Prize for the superlatives.
After that, it was Kazarinov and Suri,
two from Bell Labs, that they came with the ideas
of the, to use the superlatives for inter-sub-band.
And after that, everybody that, in 82,
I started for the development of MOCBD
for indium phosphide, this material,
to show that quantum well, two-dimensional electron gas,
and the tunneling, everything.
Everybody was working at Bell Labs.
1994, they came with the first electrical injection,
loaded, low temperature, low power.
They did great job at the same time, with the great people.
And 1997, government came,
DARPA asked my group to be involved,
and that we continue, and that here became,
immediately, from the three to 2F16 micron, in general.
And during four, five years, my group was only one
at Northwestern, in the world,
to have the continuous wave half power.
And I will tell you, that it was thanks to this,
to the luck, all of you.
And that, after that, I give you,
I'm not giving to you anything more about that.
Only I give you one of the result
that one of my student, up to 20 years old, he did,
and his paper came out, yesterday,
on applied physical test, and he got,
look at that here.
You have here, indium phosphide substrate.
You put the normal, the heterostructure laser,
that I showed you, and that is here,
is 5.8 millimeter, here is 300 micron.
And that, he did with the angle,
you have angle up to 12, why?
Because for that, you can have single mode.
203 watts is coming out from that with the single mode,
and 10% wall plug efficiency.
That is really, the reviewers mentioned,
that is unbelievable.
So that, they are the things that you can do,
and you can imagine how can change everything.
And all of you, you can do,
and you have the best facility here at university.
Now, I'm coming here to show you,
because one of the things that we want now,
we want large tuning.
It means that for the difference with the explosive
that you have in the difference,
the unfortunate difference part of the world,
and in US, you need the broadband tuning
that you can really tune,
and to see that which favorite is associated,
as an example today, TNT, or et cetera.
That is the things that we are doing,
that is the first demonstration of on-chip,
of beam combiner.
We have the laser that is coming broadband.
We can do between five to 10 microns.
And after that, to bring, to do the three,
again, is they have everything on the same chip,
and that is the thing, at this time,
we have more than 230 millimeter, centimeter minus one,
and that is the things that, again,
is thanks to the student that they are doing.
Now, this kind of laser can work
from the first day after four, five years.
You can see that exactly the result is the same.
It means that it's reliable.
I believe that the professor, John Delassie,
he can understand the value of this kind of work,
because that is that at Amoco and all of the big industry,
the life testing of the laser is very important.
And now, this kind of laser can work at 100 degree C
with one watt output power,
and to do all of the power recycling,
and no degradation, no change.
So that they are the things that you have to know
that nobody care.
You are at university.
They need you to have the best device
and the best that is compared, that they can use it.
Now, I'm coming, and I'm giving you exactly
all of the, when we started in 97,
up to now, all of the world's first and the highest
that they are the record still you have here.
Now, I'm going to the last part.
It means that to come to the, not last part,
the terrorist part of the quantum cascade laser.
Why terrorist is important?
Because when you have the 300 micron,
can penetrate to the body, to the fabric,
can penetrate at the same time as you can see here.
Yeah, can penetrate here in the envelope
to see that what you have, or in the part
to see that up to where, for example, the body.
So that, for the difference application is very important.
But we knew that, and we know that,
because it's since 100 years, everybody knows.
But one of the problem is, and there are a lot
of excellent work in the electronic part,
but nothing lock the semiconductor lock
to have one diode lock stack.
So we try to use all the beautiful high power
that we have in product, and that is the result
in the telecom they are using,
that instead of to use the non-linear
that the telecom using with the non-linear crystal,
we try to put in the same structure
to grow the two different wavelength
and to do the engineering for the non-linear part
and to come with the lasers that is there here
that you can see, that is the terrorist
that we can have with this material
from the one terrorist up to 4.6 terrorist
by doing the, again, difference frequency generation.
And the important of that is to know
that this kind of laser is very stable
because any change is for the two omega one, omega two.
You change the temperature, you change the power,
the terrorist signal doesn't change.
So for telecommunication, for some application,
it's very important.
So, and now, if you come here, we have here,
because the first question is how much power we need.
For this kind of thing, they say
that if you have one milliwatt, that is good.
So that is the 1.9 milliwatt at 3.5 terrorist,
but look at the far field, it's only 12.5 degree.
And that, this result, again,
that is everything, again, is published.
And now, in the continuous way,
because you know for some of the biosensing,
you need continuous way.
And I'm not going to the detail
because you have exactly at the same time the difference,
but we came to the first demonstration
of the terrorist room temperature continuous way.
And that, that you can see at the same time,
look at the, again, the far field,
and it's the room temperature, and it's beautiful result.
Again, the signal is no change.
That's function of the changing
of the injection current, et cetera.
So now, one thing is important,
exactly as I mentioned, we need the broadband there.
And in the in-situ monolithic here,
monolithically in the same device.
That is the monolithic trial source with broadband,
broad-range electrical tuning,
that's the world's widest monolithic tuning,
as you can see from 2.6 up to 4.21 terrorist,
we can come and to have the exactly a small dimension.
This result, again, is published.
And now, the frequency comb.
Frequency comb, I'm not going to the detail
that how it's important for,
because we can go to do a lot of important,
really, technology, but how it's possible
that is in the telecom.
Again, the short wavelength is very important.
That is the result that we just came out last week,
and that's the world's first frequency comb
at nine micron, and exactly as you can see,
because we can have very, very narrow,
and very, very, very narrow point.
But we have the, exactly as we can see here,
in continuous wave, we have 200,
200 near 30 milliwatt in continuous wave
that the spectrum give 360,
give the 60 more, and each of them
is more than one milliwatt.
So that's a lot of application,
and that is at the same time,
there is a big BAA of DARPA is out,
but unfortunately not for us.
So, and that, that's the, again,
all of that is come to the exactly the things
that you can see here that I showed you
that is nothing you can put,
and you can have all of this result to come out.
Now, let me to go to the last part.
Last part is the detector.
Photodetector in infrared.
Why we need that?
Because for the difference, difference that we need,
our eyes needs to see everything.
A small, at night, and other, everything.
So for that, the difference call
of the wavelength performance that we need.
So what we can do?
Again, we mimic the nature.
What is the nature?
Nature say that we need everything
to work at room temperature,
to work in the multicolor.
Our eyes has three color, red, green, blue,
in order to see everything.
So we need really to go to the nature,
and nature is nanotechnology.
We need to do that.
So for that, again, atomic engineering
of all of this element of the colon two, colon three,
colon three and colon five, as you can see here.
And now, you are coming to get given to you
for the infrared.
The most important, because since 50 years,
you can imagine, especially for the military,
is very important.
So they need up in the, in the plane,
they can see or from the space shuttle,
they want to see on the earth or everything
to be sure that you can.
So for that, Mercury-Cadmium-Ferrite, that is 2-6.
There are a lot of problem.
I'm not going to the detail.
I came, I went to the 3-5.
That's the first indium antimonite
that we started to do because it's 3-5.
But unfortunately, indium antimonite
cannot give multicolor.
So we came to the quantum well,
and to use, again, the quantum mechanic,
and the gap engineering.
That's the CUIP quantum well infrared photodetector.
That is CUDIP quantum dots infrared photodetector.
All of that, I'm not going to the detail,
but this one is the gap engineering
of the two binary indium-asphalt-gallium antimonite.
And look at that, what we can do.
That is, as I was explaining to you, CUIP,
what is the CUIP, what's the CUDIP,
what's the CUDIP.
And at the same time, how it's working,
exactly as you can see here,
that is the CUID quantum dots,
and this one is CUIP, that you can see,
and the other one on the top,
that's the quantum dots in the well.
CUDIP, CUDIP, and CUIP.
So for that, we did, and again, that's the timeline,
that we did, and exactly, as you can see,
the world first focal pairs,
everything came from my group,
but we stopped up to here, why?
Because it was the time that we tried
to do top two parallel.
And what's the top two?
If you have this element, aluminum antimonite, binary.
Gallium antimonite, indium arsenide.
As you can see, lattice parameter
is approximately the same,
but the conduction band of this one
is lower energy than valence band of this one.
So what does mean?
It means that if I come to put the thin layer together,
the electron can conform to the indium arsenide,
hole can conform in the gallium antimonite
in the real space.
So I have the separation of the electron and hole.
Now, if I'm going to the reciprocal lattice,
then we have the super lattice,
the minimum of the conduction band and valence band
is at the center of Brillouin zone.
So by changing one monolayer,
the thickness of that, we can change the gap.
So look at here, we did the calculation,
the simple empirical tie banding model
that all of you can do that in the first year
of the undergraduate and in the physics or the engineering.
And that if I take not these two material,
indium arsenide and gallium antimonite.
If I keep one that, as an example,
indium arsenide 18 monolayer and gallium antimonite,
I change one monolayer by one monolayer.
You can see that that's the center of Brillouin zone.
Not only I can change the gap,
but I can change at the same time the mini gap.
It means that that's really,
I can do the great engineering for the detector
and now I'm coming with a beautiful program
that again, thanks to all of the students like all of you
and that what we can do,
we can come up to say that which wavelength I need.
As an example, 11 micron to say
that on the gallium antimonite substrate,
which wavelength and what condition I have to put in MBE
in order to have the best condition for the energy gap
because with the, for one wavelength,
you have 100 different way to choose the structure
that you want to grow
and you want really to have the best eliminate OJ
and all of that.
So now I have here, but I need epitaxin now.
For that, I can do only with MBE, not MOCBD
because that's the material that you have to grow
at very low temperature
and again, I have many that for one structure,
I need 1,000 and 1,000, sometimes 2,000, 3,000 layers
and I have to do the interface in the engineering,
everything, so I do with the MBE
that you have in your ECS department,
great material, the reactor,
and we do characterization.
Again, a structure, atomic force microscope,
X-ray, all of that to see that
what is the performance that you do
and after that, you do the device.
Focal planar is, I'm not going
because I explained to you how is that.
That is the focal planar is 1K by 1K megapixel
and you have to know that
not only is the first in the world,
but at the same time, excellent performance
by comparison to mercury cadmium telluride
and in order to believe, I was giving orders
to get this material go to John Hobbs.
John Hobbs is at Air Force.
He is the person that he is measuring
all of the mercury cadmium telluride
with the focal planar is.
So he did that and the publication is done
and he's one of our student
and showing that, the image of that
and now you can see the most information in the paper.
Now, let's to go to the another
because I said that we need the two color
because the lock us.
That is the 9.5 micron, 13 micron
and that the structure, as you can see,
you have the substrate,
you grow first the shorter wavelength,
after that, the longer wavelength
and after that, you do the processing.
Look at what in the same structure
and we use the readout that can change very fast
between one color to other color.
Look at what's the difference.
That's the same.
You see that here, you can see with the 13 micron
that and here, you cannot see.
So you can see how it's important,
especially for some of the application
for the application is more important
is for more the military.
Now, we are coming for the mid-long
that this one was long-long.
That mid-long is a 5.33 and 13 micron.
Why is important?
Look at that.
That is the same, again, structure
and when you look here, look at that,
what's the difference?
That's my student that now he is at FLIR,
transferring all of this technology.
So that is the mid-long.
Now, coming to the other part,
now we would love to go to the, yes,
we want to have now mid-wavelength and short-wavelength
and for short-wavelength to have something
that can match is very interesting.
It was the problem, which material we are using.
Look at that, if you have this material,
aluminum antimony, gallium antimony,
we say that M-structure, why?
Because it's locked in.
That one of my student that he did that,
now he's at HRN and now we are,
look at that how we can change that here
by bringing aluminum antimony
and to do atomic engineering,
we can see that how we can change the gap.
It means that we can go from 1.5 to 3 micron.
That is the wavelength that everybody wants.
Now, with that, we do the focal planar rays.
Again, it's a two-color, short-mean.
And all of that, you have to know that,
not only the material, the ideas,
and at the same time, the theory,
everything and the fabrication,
everything is come from the student law field in my group.
So now, we do it here, 2.2 micron is active.
It means that we have the light.
We have to put light to see that.
That is passive because that is the infrared.
It means that that is the only is a not,
which is the infrared,
only the photon is coming in the material.
And now, you are going to see this one.
Again, with these two colors,
you can see that if you have, as an example,
the water and the cold water to put in the hot water,
and you see that there are a lot of different applications
that you can do.
And now, we are coming to the,
yes, exactly, all of that, as you can see,
is inside of the camera that you can see here.
And that this part, everything, electronic, everything,
of course, that's the focal plane that is inside,
is the PMP that I didn't explain to you.
That's a very important,
that everything is done, again,
with the professor drawing that he did that,
that you can see.
So, by that, I would like to come here
and to say that that is the timeline.
Again, it was the same thing.
The first ideas, it came from Leo Itaki,
and the same for the material with MBE,
he grown when he was at IBM in Yorktown in 1971.
All of the difference, excellent group in the workshop,
because when the Nobel Prize doing something,
everybody tried to do.
But nobody succeed to do the focal planar rays.
And they were telling that important is focal planar rays.
And by the way, the first growth of the top two
in 87 and 89, that it was the PhD of Professor Huma Mohseni
at Northwestern, and that, my student, that he did.
And that, they come to me from the Air Force,
and at the same time, Army said,
but we cannot have the top two, the focal planar rays.
That is the world's first focal planar rays
that we did at CQD.
And now, my student, Yajun, he is at L3,
and that is the responsible for all of the program
of the Vista, that some of you know about the Vista.
After that, immediately, the German group,
they thought, because I was doing binary-binary,
exactly as you saw.
And the other group, they were doing binary-ternary.
They, immediately, they changed to binary-binary.
2004, they did that, but after that,
everything that you can see, it was in our group,
and all of these students, without exception,
they are in the industry for the Vista program,
and they are transferring the technology to them.
And that, at the same time, is continuing.
Now, one of the important things, at the same time,
I will tell you, because some of you, you know,
because they said that this material, top two binary-binary,
is very difficult, because they cannot do that,
because interface is very hard.
Industry cannot keep it.
So, say that doing the gallium-3.
Indium arsenide, indium arsenide, and timonite.
Because you have, at the interface,
only one atom to change.
But, unfortunately, the theory showed
that it is impossible, in the long wavelength,
to have high quantum efficiency.
So, we did, and it further.
So, for that, I would like to come,
and to give you a kind of summary
of the everything in CUIP that we did,
and to say that, all right, that is the difference result
that give you some idea.
And, by that, I would like to finish to say that,
the, at Boeing, giving one award
to the best PhD student in the world.
And, a few, two, three years ago,
the first, it was for Dr. John Byrom,
for the, and my student, he got the second one,
Pierre Delaunay, for the top two focal planets
that he's now at.
So, by that, I would like to welcome all of you
to Northwestern to visit, and, at the same time,
thanks all of my students that they did the job.
And, by that, I would like to thank you
for your attention, and I hope this visit
is going to continue a kind of excellent collaboration
between the two great universities,
your university and Northwestern.
Thanks a lot.
Thank you.