Dating Jewelry - Georgian to early Victorian

Antique
60 followers
1 Video View·Aug 31, 2023
We're going to talk about the evolution of earring findings. We're going to start circa 1800,
as few earrings survived from late Georgian, let alone earlier than 1800. This is a beautiful
earring crafted in silver over gold. The style of this earring was somewhat common during the early
1800s and can be taken apart into two pieces. We have a top that can be worn for day and a
The ear wire is hinged at the base and hooks through the ear from the back,
and it rejoins the front and clasps with the tension hook. This attachment was used throughout
the 19th century. Once you get them in place, they're hard to remove and secure, but I can see
why they don't use them today, as they're very difficult to get in the ear. At the same time
that earring finding was used, the most popular one would have been the shepherd's hook. This
particular piece shows a complementary element attached to the shepherd's hook and further
suspending the drop. This earring is gem set with garnets, and if you look closely at this one,
you will see that the top of the earring to which the shepherd's hook is attached has the exact same
motif as the rest of the earring. This enables me to determine that this is probably an original
wire. A lot of wires have been replaced over time. The next pair is an example of that one,
so let me show you that one as well. This sample is from a bit later, but not much, and it's set
with quartz crystals that are foiled to create their green color. Foil-back gemstones are very
typical for Georgian jewelry. The top element on this earring does not match the bottom. At some
point in this earring's long life, the wire was replaced. This earring is an example also of
die stamping. You can see the hollow formed back. The first machine for die stamping was patented
in 1769 by John Pickering and adapted for jewelry production in 1777. So you can see that this
technique was used for early production work. Pin findings are a little easier to date than
other findings because they took a long time to change and evolve. This is a Georgian pin,
and you can see that it has a catch that is in the shape of a C. This C catch was used throughout the
19th century and into the early 20th century as the safety catches replaced them. The other aspect
that is important to note is the construction of the hinge. It is a fully constructed tubular hinge
with a pin, and a lot of these also have a little stop so they cannot go any further than intended,
and this prevents the pin stem from loosening and losing tension. The front of this piece has a
large stone set in a cut down collet, typical Georgian style setting.
This is a beautiful old snake chain with a great example of an early clasp. This particular clasp,
which is a tubular style clasp, has snake scales engraved on it, beautifully made.
This was the style of clasp usually used before 1840 when the spring ring clasp was patented.
It's got a little tongue with tension on it, and it presses into a slot that is the same size
and snaps into place when the tongue is fully inserted. We're still using clasps like this today.
